If the exterior of your home is unpainted or has been scraped and sanded, you will want to lay down a coat of primer. Make sure that the primer you’re using is right for the surface you’re painting. While most surfaces can be treated with acrylic primer, some surfaces, like cedar and redwood, require oil-based primers. The oil stops the wood tannins from bleeding through the topcoat.
Wood is probably the most time-consuming when it comes to preparing it for paint. It has to be scraped and sanded until there isn’t a single chip or bit of loose paint in sight. Any wood siding or trim with wood rot will need to be replaced, and all cracks and holes need to be filled with epoxy filler. Brush painting and roll painting wood siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.

A single gallon of paint can run anywhere from $20 to $80 per gallon. Professionals get a contractor discount of anywhere from 25 to 50 percent. For rough siding, like stucco, you’ll need to use 10% to 20% more paint. Some textures, like wood and stucco, require extra paint because they have more surface to cover in a tiny area compared to smooth siding. Use the highest quality exterior paint your budget will allow for your project. It will look the nicest and save you money by offering better coverage and durability. Better coverage means fewer coats and fewer work hours. You’ll also go a few years longer without needing to shell out more cash for a new coat. How do you know how much paint you're paying for? Here's some helpful math:
×