Expect to pay between $600 to $3,500 or $1.25 to $3 per square foot to coat vinyl, with prices likely increasing for the finish. It is one of the more inexpensive siding materials to have repainted, especially with recent innovations in materials. Changing the finish on your siding is not recommended unless it's completely degraded and worn away by the weather. You can save nearly half the vinyl siding installation cost of $4 per square foot by painting rather than replacing. Before adding a new coat to vinyl siding,
First, if you need it, we have it — all the paint for you home — every color you can imagine, in the finish you need, for every surface. Second, we’ can help narrow down your wall paint color choice until you decide on the right paint for your project. Of course, our paint associates at your local store can help pick our paint for your home. Pick up some paint swatches or order paint samples online so you can picture what it will look like.
Use semi gloss for hallways because walls there are more likely to be touched, bumped or otherwise marked over time (semi gloss cleans more easily). However, use flat for a living room. Flat will help hide imperfections in the walls. If you want the same color in both the hall and living room, then no problem. Use flat in the living room, semi gloss in the hall, making the threshold the transition point.
Although interior house paints can be purchased in pint-size samples or five-gallon buckets, the standard measurement is by the gallon can. A gallon can of basic water-based paint can be found on store shelves for less than $25, but the additional cost of a primer coat should be considered. One-coat paint/primer blends for most DIY projects should cost between $30 and $60 a gallon, including customized tinting. VOC levels should be lower as well. For high-end painting projects featuring designer colors or full-gloss finishes, expect to pay $60 or more per gallon.
The average cost to paint a house exterior is $2,500 for a 2,400 sq. ft. two-story home, with most homeowners paying between $1,800 and $3,200. The final cost comes out to around $0.60 to $1.60 per square foot. With so many variables in pricing, you need to take them all into account before coming to your own estimate on how much your painting project will end up costing.
Paint can be expensive. Buying too much paint is particularly frustrating since paint stores won’t refund an already tinted gallon of paint. That’s why it’s recommended to first buy around 80% of the estimated paint you need and then purchase the remainder when you’re almost finished. Factors such as square footage, surface type, and quality of paint all play into how much paint you’ll need. Paint stores should be able to help you determine how much paint you need for a specific job. If you aren’t sure how much paint to buy, ask a salesperson for advice.
Do the cleanup. When the painting is done, send the painter home and do the cleanup work yourself. This will include rolling up drop cloths and collecting scrapings, removing painter's tape (use a hair dryer on low heat to soften the adhesive), cleaning paint brushes, rollers, and other tools, replacing electric switch plates, outlet covers, and light fixtures, and sealing any leftover paint cans and storing them in a dry, temperature-controlled location.
Wood is probably the most time-consuming when it comes to preparing it for paint. It has to be scraped and sanded until there isn’t a single chip or bit of loose paint in sight. Any wood siding or trim with wood rot will need to be replaced, and all cracks and holes need to be filled with epoxy filler. Brush painting and roll painting wood siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.
It’ll cost anywhere from $200 to $6,000 to hire a painter. Expect small jobs, like kitchen cabinets or trim, to run $200 to $2,000. Larger projects, like your home’s exterior, range from $1,000 to $6,000. To estimate your needs, figure paying $2 to $6 per square foot or $20 to $50 per hour. Actual costs vary considerably depending on coverage area, type of work and regional cost of living differences.
If you have two weeks, a ladder and some experience, this makes an excellent DIY project. On most surfaces, it is forgiving of mistakes and easy to work with. Correcting mistakes only adds more time and not much more expense. However, a professional will get it done faster and with a better finish. If you don’t have 2 to 3 weeks to spare, find a professional painter near you today.