Priming - $30–$40/hour for labor. Many of the materials above need to be primed, but not all do. If you’re changing paint colors from dark to light or light to dark, use a color similar to the top coat. That way you’re less likely to need extra coats over the standard two. Prime with a flat or eggshell paint. You can ask your paint store to add tint to the primer to match it with the top coat color. Hammer in exposed nails and spray them with a metal primer to prevent rust.
For trim and doors, start with 1 gallon (3.8 L) of trim paint for every 600 sq feet of floor space. Purchase more at the store if/when needed. Trim is something that is difficult to calculate exactly, and it is more time-efficient to simply start with less than you need, and go buy more after you have used up the first round of paint and determined how much you will need to finish by seeing how much you have painted so far, compared to the gallons used.
06/14/17: Renato completed an exterior painting project for our relatively large single family home in Stamford, CT last weekend. Project did not begin well especially with the prep, repair/carpentry work, but then Renato took full control and ensured that the work done was to our satisfaction. The final result is outstanding. Minor damage to window screens, gutters and plants. Ensure that your window screens, gutters, and shutters are numbered and stored indoors or if kept outdoor covered properly against the elements. The project can be extensively delayed due to rain and you may find yourself dealing with insects and/or flooding in basement and dirty/bent/ mismatched screens/gutters/shutters. Overall we had a good team working on our project and we are satisfied with the finished product. The house looks great!
Use a roller to paint the rest of the wall. A good method to use is the 'W method'. You start by painting a large 3 foot (0.91 m) square W on the wall. Then, without lifting the roller, you fill in the W. You can paint a wall section-by-section, and do the walls one at a time for best results. It's generally a good idea to use an extension pole for your roller instead of standing on a ladder. Make sure that neither the extension pole nor the roller has plastic handles, as plastic handles are flexible and this makes it difficult to control the painting.
In addition to working on our house, Rome has now done jobs for my in-laws, brother, cousin and even a family friend (so its fair to say that I've seen a variety of his work in person) and all of us have been more than pleased with the finished products! If you're browsing for someone to "get the job done", end your search NOW and give Rome a call, you won't regret it!
Expect to pay between $600 to $3,500 or $1.25 to $3 per square foot to coat vinyl, with prices likely increasing for the finish. It is one of the more inexpensive siding materials to have repainted, especially with recent innovations in materials. Changing the finish on your siding is not recommended unless it's completely degraded and worn away by the weather. You can save nearly half the vinyl siding installation cost of $4 per square foot by painting rather than replacing. Before adding a new coat to vinyl siding,