Plan the workforce. If you intend to not hire a professional crew, you'll need lots of help. There are many jobs to be done. First there's the furniture moving, then wall preparation, floor covering, materials gathering and prep, cleaning, and don't forget everyone will have to eat. It can easily take a team of five people a full ten days to paint a two-story (approx 2000 sq.ft.) home. Get as many people to help as you can. If some can only come one or two days, great. Maybe others can fill in. Ensure you plan with your workforce members in mind. They'll need plenty of time to arrange days away from work. Identify a few key personnel:
It’ll cost you between $500 and $1,000 to paint the exterior yourself. Not including paint, it’ll cost you no more than $200 to $300 at a home improvement store like Home Depot, Lowes or Menards. You may end up spending more if you buy high-quality products from specialized shops. Professionals can get the same supplies for about half what you’ll pay.
Do the cleanup. When the painting is done, send the painter home and do the cleanup work yourself. This will include rolling up drop cloths and collecting scrapings, removing painter's tape (use a hair dryer on low heat to soften the adhesive), cleaning paint brushes, rollers, and other tools, replacing electric switch plates, outlet covers, and light fixtures, and sealing any leftover paint cans and storing them in a dry, temperature-controlled location.
Repainting is key to maintaining exterior house paint. The material that your home is made of affects how often you should repaint. For instance, wood-paneled homes need to be repainted twice as often as those made of stucco. Environmental factors also play a role in how often you should repaint, since harsh climates can be hard on a home. As a general rule of thumb, homeowners should repaint their home every six to ten years.
If the exterior of your home is unpainted or has been scraped and sanded, you will want to lay down a coat of primer. Make sure that the primer you’re using is right for the surface you’re painting. While most surfaces can be treated with acrylic primer, some surfaces, like cedar and redwood, require oil-based primers. The oil stops the wood tannins from bleeding through the topcoat.
The Cutters. Someone with meticulous attention to detail and a steady hand should be assigned the job of "cutting in," or painting a straight edge where needed, such as along a wall where the ceiling does not get painted. Many products are available to assist, but none work as well as a person who's good at doing it freehand. Ensure this person is skilled (ask them to show you). A poor, jagged, wavy or splotched cutting-in job will jump out at you every time you walk by it. Why more than one cutter? This job is nerve-wracking and painful to hands and arms after a few days. You'll want to give this person a break after a few walls.
Prep the house. Wash the walls, remove wallpaper, patch, spackle, seal stains, dry and sand before you attempt to paint. Now is also the time to apply painters tape for trimming, lay drop cloths, etc. Remove all outlet and light switch face plates, collecting screws in a zip-top bag (good opportunity to wash the face plates all at once as well).[4] You can also buy your paint at this time. Don't wait until the last minute. It can take hours to mix many gallons of all your colors. Remember that traffic triples at your home-supply and hardware stores on weekends. Buy on a weekday if possible.
If you have two weeks, a ladder and some experience, this makes an excellent DIY project. On most surfaces, it is forgiving of mistakes and easy to work with. Correcting mistakes only adds more time and not much more expense. However, a professional will get it done faster and with a better finish. If you don’t have 2 to 3 weeks to spare, find a professional painter near you today.
Celebrating 35 years in business, Shoreline Painting & Drywall Inc is a family owned and operated company located in Norwalk, CT. We transform houses into world-class homes by using the right mix of artisans and painters, state-of-the-art tools, and five star eco-friendly materials, all under a structured management team. We engage each project with integrity, first class workmanship, and pride, and we guarantee and stand behind our work. We are fully bonded, licensed and insured.

Prepping a house costs anywhere from $0.50 to $2.50 per square foot. This is almost always included in the total project price. However, the DIYer might negotiate some discounts for completing this work on their own. Be warned, proper prep is key to the quality and durability of the finish. If you do this work yourself, the contractor might no guarantee to finished product.
×