The average cost to paint a house exterior is $2,500 for a 2,400 sq. ft. two-story home, with most homeowners paying between $1,800 and $3,200. The final cost comes out to around $0.60 to $1.60 per square foot. With so many variables in pricing, you need to take them all into account before coming to your own estimate on how much your painting project will end up costing.

Carefully consider the gloss level. The shiny gloss paints are easy to clean, but will make any wall blemish stand out. The flat paints will help disguise wall blemishes, but can be difficult to clean. Generally, you'll want glossier paints where there's lots of steam or cooking (baths and kitchens) and in high-traffic areas. Flatter paints are preferred for large walls and ceilings.
Oil-based paint is commonly used for high-moisture areas, such as bathrooms and kitchens, and floors, trims, and moldings, since these areas take more abuse over time than walls do. Typically oil-based paints are less expensive than latex paints, take longer to dry, can create bad odor while drying, and contain more volatile organic compounds (VOCs), which essentially means they're less environmentally friendly.
In addition to working on our house, Rome has now done jobs for my in-laws, brother, cousin and even a family friend (so its fair to say that I've seen a variety of his work in person) and all of us have been more than pleased with the finished products! If you're browsing for someone to "get the job done", end your search NOW and give Rome a call, you won't regret it!
Painting a brand new house with smooth surfaces dramatically reduces prep work. On the other hand, if you’re painting an old home with peeling walls or siding, it’s going to take a lot longer. When deciding whether to hire house painting professionals or do it yourself, take the current state of the paint into consideration. If you’re not up for the challenge of scraping and sanding for hours, you should hire help to get the best results.
Basic labor to paint home with favorable site conditions. Prep up to 3 hr per 100 SF - clean, scrape, sand and patch up to 4 defects per 100 SF. Caulk gaps and spot prime. Roll / brush 2 coats of paint over lightly textured ceiling/walls. Paint up to 2 doors and door trim per room. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. 129 square feet $97.99 $132.56

Scale has one of the biggest impacts on deciding whether to hire painting help or take matters into your own hands. If you want to paint your home, consider whether or not this is a realistic task to take on yourself. For instance, is your house multiple stories or a townhouse? Do you just want to paint the kitchen or the entire exterior? Once you factor in the time it takes to do the prep work and lay down multiple coats of paint, a DIY paint job can get complicated. If the house painting job is extensive, you may want to leave it to professionals.
1300 square foot house + single car garage. House on hill, 1/2 of house is 2 story, 1/2 1 story. South side of house needs LOTS OF PREP WORK! Paint peeling & flaking off. Want eves & facia white--stucco bottom white--wood siding blue grey--window trim white--and small accents, window sash, and single garage door antique white. (Sherwin Williams paint design colors). 1 base coat, 2 finish coats. Cost in CA.
A gallon of paint costs $15 to $40 and covers about 350 square feet with one coat. Designer varieties can run over $100 per gallon. Your contractor pays 50 percent less than what it runs in a home improvement store. You’ll also need to spend another $20 to $100 on supplies like brushes, rollers, masking paper and plastic. A professional will have these items on-hand.
Exterior paint averages $25-$40 a gallon, and a 3,000-square-foot home takes 15 or more gallons of paint, or $375-$600 just for the paint. However, really premium paint can cost $50-$100 a gallon, or $750-$1,500 for that large home. Doing it yourself also requires renting a pressure washer or sprayer for $50-$100 a day; extra-long ladders or scaffolding at $20-$75 daily; and a power sprayer for $50-$100 daily, plus masking tape, drop cloths and other supplies. However, it's possible to paint a large, two-story house for materials-only costs of $400-$600.
Oil-based paint is commonly used for high-moisture areas, such as bathrooms and kitchens, and floors, trims, and moldings, since these areas take more abuse over time than walls do. Typically oil-based paints are less expensive than latex paints, take longer to dry, can create bad odor while drying, and contain more volatile organic compounds (VOCs), which essentially means they're less environmentally friendly.
Flat, or matte finish on the no-shine end of the finish spectrum. A friend to walls that have something to hide, flat or matte paint (the terms are interchangeable) soaks up — rather than reflects — light, has the most pigment, and provides the most coverage. It's good for adults' bedrooms and other interior rooms that won't be roughed up by kids. That's because it's tough to clean without taking paint off.
Supplies and Equipment – Scraping, sanding, and stripping tools and supplies; patching compound; power washer rental; primer; caulk; masking supplies; painters’ tape; ladders and scaffolding; paint pans; brushes, sprayers, and roller brushes all cost money, even if you do it yourself. Consider all of those tools and equipment sitting in your garage for the rest of your life vs. paying an experienced painter to do it all for you at a price that saves you weeks of time. Expect to pay $5–$6 per 100 sq. ft. for supplies and materials.
From dull to shiny finishes, paint comes in several different lusters. A paint’s luster depends on its mixture of pigment, resin, and additional ingredients. If you’re struggling to decide what finish you want, note that glossier finishes tend to be more durable and washable. Flat paint, on the other hand, is better at hiding surface imperfections. Pearl and eggshell lusters fall somewhere in the middle, as they are more washable than flat paint and partially hide irregularities.
From dull to shiny finishes, paint comes in several different lusters. A paint’s luster depends on its mixture of pigment, resin, and additional ingredients. If you’re struggling to decide what finish you want, note that glossier finishes tend to be more durable and washable. Flat paint, on the other hand, is better at hiding surface imperfections. Pearl and eggshell lusters fall somewhere in the middle, as they are more washable than flat paint and partially hide irregularities.
Two aesthetic things to consider when selecting a finish are how shiny you'd like the surface to be and whether or not you want to hide any imperfections on the surface to be painted. Generally, higher-gloss paint finishes reflect light better than lower-gloss finishes, like eggshell and matte. That makes them shiny, and also causes them to highlight flaws in walls and ceilings.
Begin prepping your walls by removing any outlet covers or lighting fixtures (if possible). Next, inspect your walls for any defects. If you encounter cracks, dents, or holes in your walls, simply fill them in with caulk or spackling compound. There are also a number of DIY tips to fill nail holes. Once your repairs dry, smooth them down with sandpaper and wipe the walls down with a damp sponge.
Are you looking for the best painting company in Barrie with an outstanding and affordable house painter? Check on Mitchell of Change of Colour Painting. As a painting contractor, they do interior and exterior painting services for homes and businesses. They are primarily serving Barrie, Ontario, but can cater to residences and businesses in Orillia, Burks Falls, Horshoe Valley, Newmarket, Muskoka, Elmvale, Richmond Hill, and Ajax. Request a free quote by calling 705-279-2557 or email at [email protected]
Begin prepping your walls by removing any outlet covers or lighting fixtures (if possible). Next, inspect your walls for any defects. If you encounter cracks, dents, or holes in your walls, simply fill them in with caulk or spackling compound. There are also a number of DIY tips to fill nail holes. Once your repairs dry, smooth them down with sandpaper and wipe the walls down with a damp sponge.

Expect to pay between $600 to $3,500 or $1.25 to $3 per square foot to coat vinyl, with prices likely increasing for the finish. It is one of the more inexpensive siding materials to have repainted, especially with recent innovations in materials. Changing the finish on your siding is not recommended unless it's completely degraded and worn away by the weather. You can save nearly half the vinyl siding installation cost of $4 per square foot by painting rather than replacing. Before adding a new coat to vinyl siding,

×