One of the most common home-improvement projects can also be one of the most enjoyable for the entire household. While some aspects of interior room painting, such as masking and “cutting in,” can require some experience and skill, applying a fresh coat of paint to a ceiling or wall or doorway is often a matter of a good brush, a paint tray, and some sweat equity. A coat of fresh paint may be all that’s required to revive a living space that’s faded a bit.
Prep work should include removing all loose paint, either with a pressure washer or by scraping; removing any trace of mildew using bleach and water or a commercial solution, and sealing or covering dark stains; caulking all seams, corners and around windows or trim; applying epoxy filler to repair serious woodwork problems; covering dark stains; sanding all rough surfaces, and priming the bare wood with a bonding primer.

Stripping – $54–$151/100 sq. ft.. “The principle of paint strippers is penetration of the paint film by the molecules of the active ingredient, causing its swelling; this volume increase causes internal strains, which, together with the weakening of the layer's adhesion to the underlying surface, leads to separation of the layer of the paint from the substrate.”— Wikipedia. All the stripper will do is soften the paint. You’ll still have to scrub or scrape it off.
It's up to you. Outside is much harder because it requires more prep, patience, time, help, money and of course, effort. I have been painting my own houses and rental properties interiors for 20 years, and I painted the exterior of one, once. I then had it promptly done again by professionals who said it would have been cheaper if they didn't have to undo my work first. My advice is to get pros for the outside because everyone will see it.

Plan the workforce. If you intend to not hire a professional crew, you'll need lots of help. There are many jobs to be done. First there's the furniture moving, then wall preparation, floor covering, materials gathering and prep, cleaning, and don't forget everyone will have to eat. It can easily take a team of five people a full ten days to paint a two-story (approx 2000 sq.ft.) home. Get as many people to help as you can. If some can only come one or two days, great. Maybe others can fill in. Ensure you plan with your workforce members in mind. They'll need plenty of time to arrange days away from work. Identify a few key personnel:

For trim and doors, start with 1 gallon (3.8 L) of trim paint for every 600 sq feet of floor space. Purchase more at the store if/when needed. Trim is something that is difficult to calculate exactly, and it is more time-efficient to simply start with less than you need, and go buy more after you have used up the first round of paint and determined how much you will need to finish by seeing how much you have painted so far, compared to the gallons used.
Painters will agree that you should always aim to paint in the part of the year when it’s least likely to rain, has low humidity, and when the temperatures are above 50 F. Rain can wash wet latex paint off a wall, and temps that are too low can affect the way the paint sticks to the walls. Some painters will add additives to the paint if working in very high temperatures to slow down the drying time.
Carefully consider the gloss level. The shiny gloss paints are easy to clean, but will make any wall blemish stand out. The flat paints will help disguise wall blemishes, but can be difficult to clean. Generally, you'll want glossier paints where there's lots of steam or cooking (baths and kitchens) and in high-traffic areas. Flatter paints are preferred for large walls and ceilings.
However, some water-based paints are easier to work with than others. The first coat of paint may not provide complete wall coverage, or the color may not be quite as saturated. Some of these problems can be addressed with a separate primer coat, but this is a time-consuming project. The ideal solution is using a higher-quality paint that combines a primer and a finish paint in a “one coat” product.
The BEHR PREMIUM PLUS 2 gal. Flat Interior The BEHR PREMIUM PLUS 2 gal. Flat Interior Ceiling Paint is designed for use on textured popcorn and acoustic-style ceilings. This splatter-resistant paint offers great hiding performance for coverage of up to 800 sq. ft. Its mildew-resistant finish helps ensure that the matte sheen lasts over time.  More + Product Details Close
Exterior paint averages $25-$40 a gallon, and a 3,000-square-foot home takes 15 or more gallons of paint, or $375-$600 just for the paint. However, really premium paint can cost $50-$100 a gallon, or $750-$1,500 for that large home. Doing it yourself also requires renting a pressure washer or sprayer for $50-$100 a day; extra-long ladders or scaffolding at $20-$75 daily; and a power sprayer for $50-$100 daily, plus masking tape, drop cloths and other supplies. However, it's possible to paint a large, two-story house for materials-only costs of $400-$600.
When determining the total cost of a home’s exterior project, you’ll want to include things like the trim, a garage, foundation, windows and doors. All work is calculated by square footage and sometimes by the linear foot, such as in the case of trim. Your contractor will give you a price for the entire project unless you specifically ask for each item separately.
×