Priming - $30–$40/hour for labor. Many of the materials above need to be primed, but not all do. If you’re changing paint colors from dark to light or light to dark, use a color similar to the top coat. That way you’re less likely to need extra coats over the standard two. Prime with a flat or eggshell paint. You can ask your paint store to add tint to the primer to match it with the top coat color. Hammer in exposed nails and spray them with a metal primer to prevent rust.
Specialty painting, like murals and trompe l’oeil, costs $40 to $50 per hour. Paint might range between $75 to $90. The professional’s skill and experience are also determining factors. While a freelance artist might charge $25 to $30 an hour, a very skilled professional might charge $80 or more. Some might also charge $60 or more for a consultation.
Plan the workforce. If you intend to not hire a professional crew, you'll need lots of help. There are many jobs to be done. First there's the furniture moving, then wall preparation, floor covering, materials gathering and prep, cleaning, and don't forget everyone will have to eat. It can easily take a team of five people a full ten days to paint a two-story (approx 2000 sq.ft.) home. Get as many people to help as you can. If some can only come one or two days, great. Maybe others can fill in. Ensure you plan with your workforce members in mind. They'll need plenty of time to arrange days away from work. Identify a few key personnel:
Your contractor will sweep or scrub the concrete first with a dry brush, and then clean it thoroughly with trisodium phosphate (TSP) and warm water, then let it dry. TSP is a mostly alkaline solution that does a great job cleaning grease and oil off concrete surfaces. Brush painting concrete siding costs $138 per 100 sq. ft., roll painting costs $50 per 100 sq. ft., and spray painting $32 per 100 sq. ft.
One of the most common home-improvement projects can also be one of the most enjoyable for the entire household. While some aspects of interior room painting, such as masking and “cutting in,” can require some experience and skill, applying a fresh coat of paint to a ceiling or wall or doorway is often a matter of a good brush, a paint tray, and some sweat equity. A coat of fresh paint may be all that’s required to revive a living space that’s faded a bit.
All of us at Shoreline Painting & Drywall are very excited and proud to announce the public availability of the new FINE PAINTS of EUROPE paint and coating technique. We are a certified contractor as well as specialized in the application of the Fine Paints of Europe coatings.completed projects for examples of our superior workmanship throughout our operating territory. See Fine Paints Of Europe Work
While many professionals use paint sprayers, they can leave drips and uneven coatings in the hands of an inexperienced user. If you’re set on DIY house painting but don’t have much practice, you may want to stick to rollers and brushes. Brushes are great for edges and smaller areas, while rollers can be used to paint large and long surfaces like siding and trim.
In addition, paint features such as mold and mildew resistance are important cost factors. Many mold-inhibiting bathroom paints, for instance, cost substantially more than ordinary latex-acrylic paint—sometimes close to twice the cost. Also, paints that come with warranties from the manufacturer may be more expensive depending on the length of the warranty. (A two-year warranty is standard.)
Carefully consider the gloss level. The shiny gloss paints are easy to clean, but will make any wall blemish stand out. The flat paints will help disguise wall blemishes, but can be difficult to clean. Generally, you'll want glossier paints where there's lots of steam or cooking (baths and kitchens) and in high-traffic areas. Flatter paints are preferred for large walls and ceilings.
It is helpful then to outline your wall with 2 or 3 inches of primer around the edges and frames before priming entirely the wall. Such a technique should help create a professional look by eliminating drips and splatters. A handheld brush is the best choice for this. For the actual primer application, roller paint can provide extra convenience. Spread the primer pain in V or W-shaped strokes. Once the primer has dried, sand down the bumps and wipe the walls down with a damp sponge.
Painting is one of the quickest and easiest ways to give your home's interior a facelift with dramatic results. Fortunately, it doesn't have to be that difficult. Home improvement stores offer samples that you can take home. With these samples, you can try a few colors in large swaths on your wall to see the how the paint interacts with the room's natural light. Compare it against design elements like pillows or furniture to see whether it will work with your overall décor.
Wood is probably the most time-consuming when it comes to preparing it for paint. It has to be scraped and sanded until there isn’t a single chip or bit of loose paint in sight. Any wood siding or trim with wood rot will need to be replaced, and all cracks and holes need to be filled with epoxy filler. Brush painting and roll painting wood siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.
Prime. Dark colors, stains (once sealed), and previously unpainted surfaces (drywall, spackle, etc.) will need a primer coat, usually white. NOTE: most paint stores & home improvement centers will now tint primer (at no charge) to match fairly close to the color of the finished coat, that way two coats of primer need not be applied. Although not all surfaces need a prime coat, skip this step at your peril! Dark colors will likely show through the first -- or even the first couple-- topcoats of paint. Sealants and unpainted surfaces like spackle patches will absorb or repel moisture in a topcoat at a different level than the areas surrounding them. Applying a good primer coat will help even out these differences. Primer equalizes a wall to a uniform surface. It's like erasing a canvas before drawing a new picture. Although some will argue the point, you generally don't need to spend a great deal on primer or buy special primer. A cheap, 5 gallon (18.9 L) bucket of plain, flat white paint will usually do the trick and cover a large area. Give your primer at least 24 hours to dry (follow its instructions) before applying a topcoat.
After you have done the multiplication, subtract about 40 sq feet per window, and about 60 sq feet per door. Divide by 400 (interior paint covers 400 sq feet per gallon). The number that remains, is how many gallons you will need. If doing multiple wall colors, then you should do this process for each room (or sets of rooms) with a particular color.
Oil-based paint is commonly used for high-moisture areas, such as bathrooms and kitchens, and floors, trims, and moldings, since these areas take more abuse over time than walls do. Typically oil-based paints are less expensive than latex paints, take longer to dry, can create bad odor while drying, and contain more volatile organic compounds (VOCs), which essentially means they're less environmentally friendly.
Having a professional paint your home from top to bottom, inside and outside has a number of advantages. For one thing, it'll save you a ton of time by not having to do the work yourself. In addition, you won't have to be concerned about safety issues, such as climbing a ladder to paint your house's gutters. Best of all, you can expect a clean, attractive finished product from a professional painter.
Containing either natural oils or a synthetic alkylate, oil-based paints are more durable than latex paints. Oil-based paints should be used on surfaces where you want the finish to last for a long time. While this kind of paint has a stronger odor and takes longer to dry, its durability is unmatchable. The strength of oil-based paints makes them a great choice for moldings and trims.
Louis Polidoro established shoreline in 1975. His son Christopher Polidoro entered the company as President in 2007. Continually bringing fresh new ideas to the forefront has been a primary focus of our company from the beginning. Our loyal customer base knows they can always count on us to bring a unique and creative approach to the process of painting their homes in an environmentally friendly way.
If the exterior of your home is unpainted or has been scraped and sanded, you will want to lay down a coat of primer. Make sure that the primer you’re using is right for the surface you’re painting. While most surfaces can be treated with acrylic primer, some surfaces, like cedar and redwood, require oil-based primers. The oil stops the wood tannins from bleeding through the topcoat.
Latex paint refers to water-based paint, the most popular and environmentally friendly paint. Since latex paints provide great color retention, they’re ideal for exterior walls that face a lot of weathering. Latex paints are also a good option for interior walls that are subjected to a lot of moisture, such as bathrooms and laundry rooms. Additionally, latex paints dry faster than oil-based alternatives and produce fewer odors.
06/14/17: Renato completed an exterior painting project for our relatively large single family home in Stamford, CT last weekend. Project did not begin well especially with the prep, repair/carpentry work, but then Renato took full control and ensured that the work done was to our satisfaction. The final result is outstanding. Minor damage to window screens, gutters and plants. Ensure that your window screens, gutters, and shutters are numbered and stored indoors or if kept outdoor covered properly against the elements. The project can be extensively delayed due to rain and you may find yourself dealing with insects and/or flooding in basement and dirty/bent/ mismatched screens/gutters/shutters. Overall we had a good team working on our project and we are satisfied with the finished product. The house looks great!