However, some water-based paints are easier to work with than others. The first coat of paint may not provide complete wall coverage, or the color may not be quite as saturated. Some of these problems can be addressed with a separate primer coat, but this is a time-consuming project. The ideal solution is using a higher-quality paint that combines a primer and a finish paint in a “one coat” product.
If you are painting for a client, skip the paint in the bucket, and use large trays. For faster completion and still quality results the 5 gallon bucket and strainer work great as well as a wood filler, 5-in-1 tool, screw gun (drill), metal joint compound tray, metal putty knife, wide drywall knife, mini hand-held paint containers (for brushes), and a mini-roller and corresponding nap (for edging, after cutting in with brush on the bottom, top and sides of wall, and the sides of ceilings, so that you don't see brush lines).
Use a roller to paint the rest of the wall. A good method to use is the 'W method'. You start by painting a large 3 foot (0.91 m) square W on the wall. Then, without lifting the roller, you fill in the W.[7] You can paint a wall section-by-section, and do the walls one at a time for best results. It's generally a good idea to use an extension pole for your roller instead of standing on a ladder. Make sure that neither the extension pole nor the roller has plastic handles, as plastic handles are flexible and this makes it difficult to control the painting.
An example of the wall measurement would be: 40 linear feet of bedroom space, x 8 wall height, =  320, x 2 = 640. Minus 1 door (60) and 2 windows (80) = 500 sq feet being painted. Then divide the 500 by 400 (sq feet per gallon), and you get 1.25 gallons (4.73 L) needed for that room. For this, you'd need 1 gallon (3.8 L) and 1 US-quart (950 ml). If the amount it comes out to is over 1.3, we recommend just getting 2 gallons (7.6 L) so that you have leftovers if needed, since 2 US quarts (2,000 ml) costs essentially the same as a gallon in most stores.

A. Many homeowners purchase small sample cans of interior paint at a local home improvement store and apply each one to a different section of the wall. You should look at each color under different lighting conditions, such as natural daylight and nighttime lighting. You'll also want to consider the general color scheme of the furnishings, artwork and flooring that will be in that space.
1300 square foot house + single car garage. House on hill, 1/2 of house is 2 story, 1/2 1 story. South side of house needs LOTS OF PREP WORK! Paint peeling & flaking off. Want eves & facia white--stucco bottom white--wood siding blue grey--window trim white--and small accents, window sash, and single garage door antique white. (Sherwin Williams paint design colors). 1 base coat, 2 finish coats. Cost in CA.
A. Many homeowners purchase small sample cans of interior paint at a local home improvement store and apply each one to a different section of the wall. You should look at each color under different lighting conditions, such as natural daylight and nighttime lighting. You'll also want to consider the general color scheme of the furnishings, artwork and flooring that will be in that space.
A more user-friendly option is a water-based “latex” paint, which blends acrylic pigments with a thin base for easy application with a brush or paint sprayer. Although many water-based interior paints are promoted as one-coat wonders, there can still be a need for an initial primer coat followed by one or two coats of latex paint. Water-based paints are very low in VOCs, which means minimal odors during the drying period. Most spills can be wiped away without the need for chemical cleaners, and clothing containing latex paint can be laundered in water and detergent. Water-based paint is a good choice for first-time DIYers and their younger assistants.

Get estimates from several contractors, request and contact references, search for complaints at the Better Business Bureau[12] and check that the company is properly bonded and insured, as well as licensed in your state[13] . Only pay a small deposit, and don't pay the entire amount until the job is finished to your complete satisfaction (both painting and cleanup).

Paint acts as a protectant on wooden siding, slowing down the rotting process. This makes it incredibly important to fully coat the undersides of corner boards on the exterior of your home. Whether you’re undertaking a DIY house painting endeavor or have hired professionals, you should check corner boards and shutters to make sure they’re fully painted.
Homeowners report that painting a home’s exterior costs an average of $2,923 with a typical range between $1,734 and $4,119. The average price per square foot ranges from $0.50 to $3.50 depending on your location, condition of your exterior and accessibility. Stucco and brick cost an average of $1 per square foot more than vinyl or wood. The average 2,500 square feet home costs an average of $4,000, though it can range from $1,250 to $8,750.
×