Your contractor will sweep or scrub the concrete first with a dry brush, and then clean it thoroughly with trisodium phosphate (TSP) and warm water, then let it dry. TSP is a mostly alkaline solution that does a great job cleaning grease and oil off concrete surfaces. Brush painting concrete siding costs $138 per 100 sq. ft., roll painting costs $50 per 100 sq. ft., and spray painting $32 per 100 sq. ft.

On average, expect to pay $0.60–$1.60 per square foot for exterior painting. The average for painting labor across the country is $30–$40 per hour before you pay for paint, painting supplies, location costs, and equipment. To get a very general estimate, though, painting contractors will take into account the square footage of your home and the number of stories and also factor in normal prep work.
06/14/17: Renato completed an exterior painting project for our relatively large single family home in Stamford, CT last weekend. Project did not begin well especially with the prep, repair/carpentry work, but then Renato took full control and ensured that the work done was to our satisfaction. The final result is outstanding. Minor damage to window screens, gutters and plants. Ensure that your window screens, gutters, and shutters are numbered and stored indoors or if kept outdoor covered properly against the elements. The project can be extensively delayed due to rain and you may find yourself dealing with insects and/or flooding in basement and dirty/bent/ mismatched screens/gutters/shutters. Overall we had a good team working on our project and we are satisfied with the finished product. The house looks great!
A gallon of paint costs $15 to $40 and covers about 350 square feet with one coat. Designer varieties can run over $100 per gallon. Your contractor pays 50 percent less than what it runs in a home improvement store. You’ll also need to spend another $20 to $100 on supplies like brushes, rollers, masking paper and plastic. A professional will have these items on-hand.
The following guidelines will set you up for success. First, start at the top and work down. Second, paint out of the sun’s glare, since the sun will cause the paint to dry too quickly and flake or blister. To avoid marks, try to brush from one wet surface onto another. If you do have to paint onto a dry surface, overlap the wet paint onto the dry surface by several inches.

Before hiring a painter, you should get a detailed estimate from them. This should include costs for labor, materials, paint, and the timeframe of the project. Covering details upfront will prevent issues from emerging later on. Ask the painter if they charge for travel time, whether their estimate includes pressure washing and caulking, and any other questions you might have.
While vinyl siding salespeople claim it never needs to be painted, it does lose its color strength over time, and the degree of fading can vary depending on which sides get the most exposure to sunlight. Perhaps it still hasn’t faded, but you don’t like the color much. You can’t go any darker than its current color, though, because the siding is designed to absorb only so much heat, and a darker color could cause it to buckle. Vinyl paint is available in many colors. Brush painting and roll painting vinyl siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.
Prep work should include removing all loose paint, either with a pressure washer or by scraping; removing any trace of mildew using bleach and water or a commercial solution, and sealing or covering dark stains; caulking all seams, corners and around windows or trim; applying epoxy filler to repair serious woodwork problems; covering dark stains; sanding all rough surfaces, and priming the bare wood with a bonding primer.
The following guidelines will set you up for success. First, start at the top and work down. Second, paint out of the sun’s glare, since the sun will cause the paint to dry too quickly and flake or blister. To avoid marks, try to brush from one wet surface onto another. If you do have to paint onto a dry surface, overlap the wet paint onto the dry surface by several inches.

Many new homeowners want to change the color scheme of their rooms, either as a way to personalize the space or match the walls with existing furnishings and artwork. Interior house paint is relatively inexpensive, and it doesn’t require complicated machinery or professional-level skills to apply. There are also thousands of customizable colors available, as well as a choice of finishes, such as matte, semigloss, or gloss.
One important consideration when comparison shopping for interior paint is the manufacturer’s available palette. One brand of latex paint may be significantly less expensive than others, but the tint options can be limited. There can also be a noticeable difference between one manufacturer’s “midnight blue” and another’s “Prussian blue.” There is no universal standard, so this is why sample cards and test paints are so important.
The Cutters. Someone with meticulous attention to detail and a steady hand should be assigned the job of "cutting in," or painting a straight edge where needed, such as along a wall where the ceiling does not get painted. Many products are available to assist, but none work as well as a person who's good at doing it freehand. Ensure this person is skilled (ask them to show you). A poor, jagged, wavy or splotched cutting-in job will jump out at you every time you walk by it. Why more than one cutter? This job is nerve-wracking and painful to hands and arms after a few days. You'll want to give this person a break after a few walls.
Rome came to our house to take a look around back in May and promised me a quote by the end of the day-unlike other workers that we've had in the past, Rome stuck by his word and had it to me via email by dinnertime....something that reinforced the initial positive feeling that I had about him as he surveyed our home and listened to my ideas. We hired Rome and he and his crew began working on our home within the following couple weeks. Something we love about Rome is how knowledgable he is when it comes to the range of paint products and colors (we had a general idea that we wanted a light neutral color with a little tint of green and the easiest way for me was to have Rome narrow it down to 2-3 colors), for whatever advice or guidance we needed, he was always (and is always) a phone call away!

There are a few ways to prevent your interior house paint from fading — or stop it from getting worse. One simple fix is to install shades or curtains to block incoming sunlight. If you don’t want to shut out the light, you can also tint your windows with a UV protectant. However, fading shouldn’t be much of an issue if you use high-quality interior house paint.


Get estimates from several contractors, request and contact references, search for complaints at the Better Business Bureau[12] and check that the company is properly bonded and insured, as well as licensed in your state[13] . Only pay a small deposit, and don't pay the entire amount until the job is finished to your complete satisfaction (both painting and cleanup).


Basic labor to paint home with favorable site conditions. Prep up to 3 hr per 100 SF - clean, scrape, sand and patch up to 4 defects per 100 SF. Caulk gaps and spot prime. Roll / brush 2 coats of paint over lightly textured ceiling/walls. Paint up to 2 doors and door trim per room. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. 129 square feet $97.99 $132.56
Homeowners report that painting a home’s exterior costs an average of $2,923 with a typical range between $1,734 and $4,119. The average price per square foot ranges from $0.50 to $3.50 depending on your location, condition of your exterior and accessibility. Stucco and brick cost an average of $1 per square foot more than vinyl or wood. The average 2,500 square feet home costs an average of $4,000, though it can range from $1,250 to $8,750.
×