The following guidelines will set you up for success. First, start at the top and work down. Second, paint out of the sun’s glare, since the sun will cause the paint to dry too quickly and flake or blister. To avoid marks, try to brush from one wet surface onto another. If you do have to paint onto a dry surface, overlap the wet paint onto the dry surface by several inches.
It’ll cost anywhere from $200 to $6,000 to hire a painter. Expect small jobs, like kitchen cabinets or trim, to run $200 to $2,000. Larger projects, like your home’s exterior, range from $1,000 to $6,000. To estimate your needs, figure paying $2 to $6 per square foot or $20 to $50 per hour. Actual costs vary considerably depending on coverage area, type of work and regional cost of living differences.
Similar to exterior mold, mold is more likely to emerge in warm and humid areas. That being said, rooms like bathrooms and basements are more prone to mold. To preemptively prevent mold, use paints that are mold resistant. Should you find mold on a wall in your home, you can clean it with a simple solution of one part bleach to four parts water. If the area is large, you may want to leave the cleaning to a professional.
Latex paint refers to water-based paint, the most popular and environmentally friendly paint. Since latex paints provide great color retention, they’re ideal for exterior walls that face a lot of weathering. Latex paints are also a good option for interior walls that are subjected to a lot of moisture, such as bathrooms and laundry rooms. Additionally, latex paints dry faster than oil-based alternatives and produce fewer odors.
Basic labor to paint home with favorable site conditions. Prep up to 3 hr per 100 SF - clean, scrape, sand and patch up to 4 defects per 100 SF. Caulk gaps and spot prime. Roll / brush 2 coats of paint over lightly textured ceiling/walls. Paint up to 2 doors and door trim per room. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. 129 square feet $97.99 $132.56
Remove any outlet covers or lighting fixtures (if possible). Then scrutinize the walls for any defects. Simply fill them in with caulk or spackling compound if you encounter cracks, dents, or holes in your walls and trims. There are also tips and tricks for filling nail holes. Once done with the repair, smoothen the wall down with sandpaper and then wipe it with a damp sponge.
A moisture meter will let your contractor know if there’s moisture in the stucco before starting. The wetter the material, the less ready it is to be sanded, painted, finished or covered. Your contractor will use a premixed stucco repair patch material to fill any small holes and will paint on dry days to avoid sealing in water. Painting rough stucco requires more paint. Brush painting stucco costs $112 per 100 sq. ft., roll painting costs $55 per 100 sq. ft., and spray painting stucco costs $25 per 100 sq. ft.
If you have two weeks, a ladder and some experience, this makes an excellent DIY project. On most surfaces, it is forgiving of mistakes and easy to work with. Correcting mistakes only adds more time and not much more expense. However, a professional will get it done faster and with a better finish. If you don’t have 2 to 3 weeks to spare, find a professional painter near you today.
Plan the schedule. Get a grip on the time it will take to bring the project to fruition. Plan for time to move furniture, wall prep, cut in, the painting itself, eating and breaks, and don't forget cleanup and bringing furniture back in. As you plan, err on the side of prudence. Unforeseen events will slow you down, so allow time for these. Remember, this is a multi-day project. Don't try to fit too much into a day. If you move faster than planned, great!
From dull to shiny finishes, paint comes in several different lusters. A paint’s luster depends on its mixture of pigment, resin, and additional ingredients. If you’re struggling to decide what finish you want, note that glossier finishes tend to be more durable and washable. Flat paint, on the other hand, is better at hiding surface imperfections. Pearl and eggshell lusters fall somewhere in the middle, as they are more washable than flat paint and partially hide irregularities.
Interview past clients. Talking to former customers is always a good idea. But, to ensure you're getting honest feedback — not just feedback from people who have been handpicked by the painter to sing their praises — ask to speak to the painter's three most recent clients. When you speak to them, ask about specifics. Find out whether the painters showed up on time, protected furniture from paint spills, kept the house clean, completed the project on schedule, and of course, what it cost to paint their house.
Homeowners report that painting a home’s exterior costs an average of $2,923 with a typical range between $1,734 and $4,119. The average price per square foot ranges from $0.50 to $3.50 depending on your location, condition of your exterior and accessibility. Stucco and brick cost an average of $1 per square foot more than vinyl or wood. The average 2,500 square feet home costs an average of $4,000, though it can range from $1,250 to $8,750.