Staining a deck costs $540 to $1,000. Covered porches might hit $2,000. Consider negotiating the price a bit lower by combining it with a full exterior job. Painting handrails can run anywhere from $1 to $2 per linear foot, depending on whether it’s wood, metal or some other material. Although you might think this is an easy $30 to $100 job, most painters charge a minimum fee regardless of the size of the project. You’ll probably end up paying at least $150.


If you are seeking a few gallons of interior house paint for your home, office, or apartment, read our helpful shopping guide. We have compared dozens of brands of interior house paints currently on the market and have compiled a short list of our favorites. Topping that list is Benjamin Moore Ultra Spec 500 Interior Paint, a low-odor, VOC-free formula from one of the most trusted brands in paint.
A moisture meter will let your contractor know if there’s moisture in the stucco before starting. The wetter the material, the less ready it is to be sanded, painted, finished or covered. Your contractor will use a premixed stucco repair patch material to fill any small holes and will paint on dry days to avoid sealing in water. Painting rough stucco requires more paint. Brush painting stucco costs $112 per 100 sq. ft., roll painting costs $55 per 100 sq. ft., and spray painting stucco costs $25 per 100 sq. ft.
At least 90% of painting time goes into setup, prep work, and priming. The method of prepping required varies for each type of exterior material on the home, but every project must be patched and cleaned. The more thoroughly you prep and prime your home’s exterior, the longer your paint job will last. You could save quite a bit if you do this part yourself, but it must be done correctly, or your contractor will have to go over what you missed. The prices mentioned are based on paying a contractor to do each job rather than one overall quote for the work from start to finish.
On average, expect to pay $0.60–$1.60 per square foot for exterior painting. The average for painting labor across the country is $30–$40 per hour before you pay for paint, painting supplies, location costs, and equipment. To get a very general estimate, though, painting contractors will take into account the square footage of your home and the number of stories and also factor in normal prep work.
You might pay an additional $1 to $5 per square foot for optional repairs and updates. Consider having your molding, trim and baseboards checked while you have a professional in your home. This might be a good time to upgrade or repair any cracks, warps or other issues. Pros can usually touch up or replace these items for an affordable rate, and they may even package such fixups with your project.
If you are painting for a client, skip the paint in the bucket, and use large trays. For faster completion and still quality results the 5 gallon bucket and strainer work great as well as a wood filler, 5-in-1 tool, screw gun (drill), metal joint compound tray, metal putty knife, wide drywall knife, mini hand-held paint containers (for brushes), and a mini-roller and corresponding nap (for edging, after cutting in with brush on the bottom, top and sides of wall, and the sides of ceilings, so that you don't see brush lines).

In addition, paint features such as mold and mildew resistance are important cost factors. Many mold-inhibiting bathroom paints, for instance, cost substantially more than ordinary latex-acrylic paint—sometimes close to twice the cost. Also, paints that come with warranties from the manufacturer may be more expensive depending on the length of the warranty. (A two-year warranty is standard.)


While vinyl siding salespeople claim it never needs to be painted, it does lose its color strength over time, and the degree of fading can vary depending on which sides get the most exposure to sunlight. Perhaps it still hasn’t faded, but you don’t like the color much. You can’t go any darker than its current color, though, because the siding is designed to absorb only so much heat, and a darker color could cause it to buckle. Vinyl paint is available in many colors. Brush painting and roll painting vinyl siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.
I hired a painting company to paint my house and garage. Price was about $5,000.Sherwin Williams paint T-1000. When he was questioned about the paint peeling two days after he painted the garage he quit even with a contract not a very professional person. So,now I have to find someone else to paint my house.After 3 weeks of them trying to paint around the rain. The original time frame was 3-4 days.Yes 3 weeks and all that got done was a small two car garage that could have been done in two days.I know he did not prep correctly and properly I will end up having to redo the garage. I went to Sherwin Williams and got the colors.So beware even with a contract and good references.
Exterior paint averages $25-$40 a gallon, and a 3,000-square-foot home takes 15 or more gallons of paint, or $375-$600 just for the paint. However, really premium paint can cost $50-$100 a gallon, or $750-$1,500 for that large home. Doing it yourself also requires renting a pressure washer or sprayer for $50-$100 a day; extra-long ladders or scaffolding at $20-$75 daily; and a power sprayer for $50-$100 daily, plus masking tape, drop cloths and other supplies. However, it's possible to paint a large, two-story house for materials-only costs of $400-$600.
Louis Polidoro established shoreline in 1975. His son Christopher Polidoro entered the company as President in 2007. Continually bringing fresh new ideas to the forefront has been a primary focus of our company from the beginning. Our loyal customer base knows they can always count on us to bring a unique and creative approach to the process of painting their homes in an environmentally friendly way.
First, if you need it, we have it — all the paint for you home — every color you can imagine, in the finish you need, for every surface. Second, we’ can help narrow down your wall paint color choice until you decide on the right paint for your project. Of course, our paint associates at your local store can help pick our paint for your home. Pick up some paint swatches or order paint samples online so you can picture what it will look like. 
Similar to exterior mold, mold is more likely to emerge in warm and humid areas. That being said, rooms like bathrooms and basements are more prone to mold. To preemptively prevent mold, use paints that are mold resistant. Should you find mold on a wall in your home, you can clean it with a simple solution of one part bleach to four parts water. If the area is large, you may want to leave the cleaning to a professional.
Compare offers. The painter offering the lowest rate may not always be the best painter for the job. Indeed, the total cost isn't the only factor to consider when choosing between multiple bids. You'll want to look at contracts side by side to ensure you're making an apples-to-apples comparison. Are the same materials being used? Are the same services included? Does the painter provide a warranty?
Expect to pay between $600 to $3,500 or $1.25 to $3 per square foot to coat vinyl, with prices likely increasing for the finish. It is one of the more inexpensive siding materials to have repainted, especially with recent innovations in materials. Changing the finish on your siding is not recommended unless it's completely degraded and worn away by the weather. You can save nearly half the vinyl siding installation cost of $4 per square foot by painting rather than replacing. Before adding a new coat to vinyl siding,
×