If you are seeking a few gallons of interior house paint for your home, office, or apartment, read our helpful shopping guide. We have compared dozens of brands of interior house paints currently on the market and have compiled a short list of our favorites. Topping that list is Benjamin Moore Ultra Spec 500 Interior Paint, a low-odor, VOC-free formula from one of the most trusted brands in paint.
Your contractor will sweep or scrub the concrete first with a dry brush, and then clean it thoroughly with trisodium phosphate (TSP) and warm water, then let it dry. TSP is a mostly alkaline solution that does a great job cleaning grease and oil off concrete surfaces. Brush painting concrete siding costs $138 per 100 sq. ft., roll painting costs $50 per 100 sq. ft., and spray painting $32 per 100 sq. ft.

Do the cleanup. When the painting is done, send the painter home and do the cleanup work yourself. This will include rolling up drop cloths and collecting scrapings, removing painter's tape (use a hair dryer on low heat to soften the adhesive), cleaning paint brushes, rollers, and other tools, replacing electric switch plates, outlet covers, and light fixtures, and sealing any leftover paint cans and storing them in a dry, temperature-controlled location.


For trim and doors, start with 1 gallon (3.8 L) of trim paint for every 600 sq feet of floor space. Purchase more at the store if/when needed. Trim is something that is difficult to calculate exactly, and it is more time-efficient to simply start with less than you need, and go buy more after you have used up the first round of paint and determined how much you will need to finish by seeing how much you have painted so far, compared to the gallons used.
Determine the coverage area for each color and estimate the number of gallons you'll need for each. For odd walls with angled ceilings, make your best guess. If you're not comfortable doing this, measure the wall at its highest height and multiply that by its width. Now subtract the lowest height from the highest height, multiply that number by the width, cut that answer in half, and finally subtract that new number from the original height by width. That should give you the wall area.
An example of the wall measurement would be: 40 linear feet of bedroom space, x 8 wall height, =  320, x 2 = 640. Minus 1 door (60) and 2 windows (80) = 500 sq feet being painted. Then divide the 500 by 400 (sq feet per gallon), and you get 1.25 gallons (4.73 L) needed for that room. For this, you'd need 1 gallon (3.8 L) and 1 US-quart (950 ml). If the amount it comes out to is over 1.3, we recommend just getting 2 gallons (7.6 L) so that you have leftovers if needed, since 2 US quarts (2,000 ml) costs essentially the same as a gallon in most stores.
One of the first considerations when it comes to interior house paint is the base. There are two schools of thought, each with their pros and cons. Some brands commonly sold to contractors for commercial projects are oil-based, meaning the chosen pigment is mixed with an oil derivative called alkyd. Oil-based paint provides thorough coverage, and the finished coat resists moisture well. However, oil-based paint releases a high level of volatile organic compounds (VOCs) as it dries, and it can only be removed from floors, brushes, and clothing with strong chemical paint thinners. In fact, many states have actually banned the use of oil-based paints because of their VOC levels and hazardous ingredients.

Test different paint swatches. The last thing you want to do is paint a whole room and then decide you despise the color (yes, it happens!). Try out different paint colors on the surface before choosing the paint that you want. Buying sample sizes will help you save money. The caveat: paint color samples are not real paint, so if you try to finish or touch up a project with samples, the paint will fade.
Begin prepping your walls by removing any outlet covers or lighting fixtures (if possible). Next, inspect your walls for any defects. If you encounter cracks, dents, or holes in your walls, simply fill them in with caulk or spackling compound. There are also a number of DIY tips to fill nail holes. Once your repairs dry, smooth them down with sandpaper and wipe the walls down with a damp sponge.

Expect to pay between $600 to $3,500 or $1.25 to $3 per square foot to coat vinyl, with prices likely increasing for the finish. It is one of the more inexpensive siding materials to have repainted, especially with recent innovations in materials. Changing the finish on your siding is not recommended unless it's completely degraded and worn away by the weather. You can save nearly half the vinyl siding installation cost of $4 per square foot by painting rather than replacing. Before adding a new coat to vinyl siding,
×