If the exterior of your home is unpainted or has been scraped and sanded, you will want to lay down a coat of primer. Make sure that the primer you’re using is right for the surface you’re painting. While most surfaces can be treated with acrylic primer, some surfaces, like cedar and redwood, require oil-based primers. The oil stops the wood tannins from bleeding through the topcoat.
Your contractor will sweep or scrub the concrete first with a dry brush, and then clean it thoroughly with trisodium phosphate (TSP) and warm water, then let it dry. TSP is a mostly alkaline solution that does a great job cleaning grease and oil off concrete surfaces. Brush painting concrete siding costs $138 per 100 sq. ft., roll painting costs $50 per 100 sq. ft., and spray painting $32 per 100 sq. ft.
It’ll cost anywhere from $200 to $6,000 to hire a painter. Expect small jobs, like kitchen cabinets or trim, to run $200 to $2,000. Larger projects, like your home’s exterior, range from $1,000 to $6,000. To estimate your needs, figure paying $2 to $6 per square foot or $20 to $50 per hour. Actual costs vary considerably depending on coverage area, type of work and regional cost of living differences.
One of the first considerations when it comes to interior house paint is the base. There are two schools of thought, each with their pros and cons. Some brands commonly sold to contractors for commercial projects are oil-based, meaning the chosen pigment is mixed with an oil derivative called alkyd. Oil-based paint provides thorough coverage, and the finished coat resists moisture well. However, oil-based paint releases a high level of volatile organic compounds (VOCs) as it dries, and it can only be removed from floors, brushes, and clothing with strong chemical paint thinners. In fact, many states have actually banned the use of oil-based paints because of their VOC levels and hazardous ingredients.