The average cost to paint a house exterior is $2,500 for a 2,400 sq. ft. two-story home, with most homeowners paying between $1,800 and $3,200. The final cost comes out to around $0.60 to $1.60 per square foot. With so many variables in pricing, you need to take them all into account before coming to your own estimate on how much your painting project will end up costing.
Paint can be expensive. Buying too much paint is particularly frustrating since paint stores won’t refund an already tinted gallon of paint. That’s why it’s recommended to first buy around 80% of the estimated paint you need and then purchase the remainder when you’re almost finished. Factors such as square footage, surface type, and quality of paint all play into how much paint you’ll need. Paint stores should be able to help you determine how much paint you need for a specific job. If you aren’t sure how much paint to buy, ask a salesperson for advice.
Each type of siding will need to be treated differently when it comes to primer and paint at different price points. Exterior paint costs between $35–$80 per gallon depending on the quality you choose. It’s not always true that the more you pay for your paint, the longer-lasting your paint job will be, but you do need to be careful when researching exterior paints to make sure it can weather the local elements well.
One important consideration when comparison shopping for interior paint is the manufacturer’s available palette. One brand of latex paint may be significantly less expensive than others, but the tint options can be limited. There can also be a noticeable difference between one manufacturer’s “midnight blue” and another’s “Prussian blue.” There is no universal standard, so this is why sample cards and test paints are so important.
For walls, measure the linear feet of wall space (measuring along the baseboards) for the areas to be painted (using a tape measure, laser, or both). Then multiply this by the ceiling height (usually it is 7.5 or 8). If there are 2 story areas, measure them separately, and multiply them by double the regular wall height. Then multiply the total number by 2 (for 2 coats).
Plan the budget. Costs will vary greatly, depending on price and quality. Choosing mid to upper-grade paint, expect to pay in the area of $350.00 in paint alone for a 2000 sq. ft. house. Add another $100 to $200 in brushes, rollers, pans, tape, and other materials. Don't forget food, if you plan to feed your workforce. When it comes to materials, not all paints are equal. Some truly cover with one coat, some say they do but don't. Your costs will double if you have to apply two coats to everything, so buying the cheaper paint might cost more in the long run. Trust your paint professional salesman (to a certain degree) to tell you which paint to buy. You can generally go cheap on primer, expensive on top coats.
Do the cleanup. When the painting is done, send the painter home and do the cleanup work yourself. This will include rolling up drop cloths and collecting scrapings, removing painter's tape (use a hair dryer on low heat to soften the adhesive), cleaning paint brushes, rollers, and other tools, replacing electric switch plates, outlet covers, and light fixtures, and sealing any leftover paint cans and storing them in a dry, temperature-controlled location.
High-gloss paint is the most durable and easiest to clean of all paint sheens. It's ultra-shiny, light-reflective, and hard (think appliance-paint tough). High-glass paint has too much shine for interior walls; you'd find the reflections and drywall flaws distracting. It is a good choice for areas that sticky fingers touch, though, such as cabinets, trim, and doors.
1300 square foot house + single car garage. House on hill, 1/2 of house is 2 story, 1/2 1 story. South side of house needs LOTS OF PREP WORK! Paint peeling & flaking off. Want eves & facia white--stucco bottom white--wood siding blue grey--window trim white--and small accents, window sash, and single garage door antique white. (Sherwin Williams paint design colors). 1 base coat, 2 finish coats. Cost in CA.
There are a number of measures you can take to prevent mold on the exterior of your home. Anti-mold paint works to stop mold from spreading. Still, anti-mold paint does deteriorate when exposed to prolonged sunlight and moisture. To prevent mold damage from spreading, it’s best to act fast. In order to ensure that all the mold is eradicated, we recommend calling a professional mold removal company.
At least 90% of painting time goes into setup, prep work, and priming. The method of prepping required varies for each type of exterior material on the home, but every project must be patched and cleaned. The more thoroughly you prep and prime your home’s exterior, the longer your paint job will last. You could save quite a bit if you do this part yourself, but it must be done correctly, or your contractor will have to go over what you missed. The prices mentioned are based on paying a contractor to do each job rather than one overall quote for the work from start to finish.
Priming - $30–$40/hour for labor. Many of the materials above need to be primed, but not all do. If you’re changing paint colors from dark to light or light to dark, use a color similar to the top coat. That way you’re less likely to need extra coats over the standard two. Prime with a flat or eggshell paint. You can ask your paint store to add tint to the primer to match it with the top coat color. Hammer in exposed nails and spray them with a metal primer to prevent rust.
Expect to pay between $600 to $3,500 or $1.25 to $3 per square foot to coat vinyl, with prices likely increasing for the finish. It is one of the more inexpensive siding materials to have repainted, especially with recent innovations in materials. Changing the finish on your siding is not recommended unless it's completely degraded and worn away by the weather. You can save nearly half the vinyl siding installation cost of $4 per square foot by painting rather than replacing. Before adding a new coat to vinyl siding,