At least 90% of painting time goes into setup, prep work, and priming. The method of prepping required varies for each type of exterior material on the home, but every project must be patched and cleaned. The more thoroughly you prep and prime your home’s exterior, the longer your paint job will last. You could save quite a bit if you do this part yourself, but it must be done correctly, or your contractor will have to go over what you missed. The prices mentioned are based on paying a contractor to do each job rather than one overall quote for the work from start to finish.
When determining the total cost of a home’s exterior project, you’ll want to include things like the trim, a garage, foundation, windows and doors. All work is calculated by square footage and sometimes by the linear foot, such as in the case of trim. Your contractor will give you a price for the entire project unless you specifically ask for each item separately.
Summer is the busiest time of the year for painters, with some booked up to six months ahead of time, so book well in advance. Homebuyers getting VA loans have run into difficulties with this, so if you’re getting a VA renovation/rehabilitation loan, get all your painting and inspection estimates and work dates booked before you fill out any paperwork with a closing date, or the house will not be move-in ready in time.
A more user-friendly option is a water-based “latex” paint, which blends acrylic pigments with a thin base for easy application with a brush or paint sprayer. Although many water-based interior paints are promoted as one-coat wonders, there can still be a need for an initial primer coat followed by one or two coats of latex paint. Water-based paints are very low in VOCs, which means minimal odors during the drying period. Most spills can be wiped away without the need for chemical cleaners, and clothing containing latex paint can be laundered in water and detergent. Water-based paint is a good choice for first-time DIYers and their younger assistants.
The following guidelines will set you up for success. First, start at the top and work down. Second, paint out of the sun’s glare, since the sun will cause the paint to dry too quickly and flake or blister. To avoid marks, try to brush from one wet surface onto another. If you do have to paint onto a dry surface, overlap the wet paint onto the dry surface by several inches.
However, some water-based paints are easier to work with than others. The first coat of paint may not provide complete wall coverage, or the color may not be quite as saturated. Some of these problems can be addressed with a separate primer coat, but this is a time-consuming project. The ideal solution is using a higher-quality paint that combines a primer and a finish paint in a “one coat” product.
Your contractor will sweep or scrub the concrete first with a dry brush, and then clean it thoroughly with trisodium phosphate (TSP) and warm water, then let it dry. TSP is a mostly alkaline solution that does a great job cleaning grease and oil off concrete surfaces. Brush painting concrete siding costs $138 per 100 sq. ft., roll painting costs $50 per 100 sq. ft., and spray painting $32 per 100 sq. ft.
Some paints are two-in-one paint and primer products, or so-called "self-priming paints." These paints are designed to seal and cover surfaces in one coat. But, here's the secret: though it's called a paint-and-primer-in-one product, there's actually no primer in the mix—what you're really working with is just a thicker paint that often doesn't perform as well as using separate primer and paint.
Use a roller to paint the rest of the wall. A good method to use is the 'W method'. You start by painting a large 3 foot (0.91 m) square W on the wall. Then, without lifting the roller, you fill in the W. You can paint a wall section-by-section, and do the walls one at a time for best results. It's generally a good idea to use an extension pole for your roller instead of standing on a ladder. Make sure that neither the extension pole nor the roller has plastic handles, as plastic handles are flexible and this makes it difficult to control the painting.
We know ads can be annoying, but they’re what allow us to make all of wikiHow available for free. Please help us continue to provide you with our trusted how-to guides and videos for free by whitelisting wikiHow on your ad blocker. If you really can’t stand to see another ad again, then please consider supporting our work with a contribution to wikiHow.
My husband and I hired Rome and his crew to paint the exterior of our home and we couldn't be happier with the finished product! We purchased a Contemporary style home that was built in 1985 and what was once a gloomy, sad shade of a blue/grey, in desperate need of a facelift. Now, this house really feels like a "new" home (complete with an updated deck...read on for more)!
Premium Plus Interior Ceiling Paint 1 gal. features Premium Plus Interior Ceiling Paint 1 gal. features a durable, acrylic-latex formula that is specifically designed for use on previously painted or primed interior ceilings. This spatter resistant formula minimizes glare and provides a mildew-resistant finish. This formula also maintains the original acoustical ceiling properties. More + Product Details Close
A single gallon of paint can run anywhere from $20 to $80 per gallon. Professionals get a contractor discount of anywhere from 25 to 50 percent. For rough siding, like stucco, you’ll need to use 10% to 20% more paint. Some textures, like wood and stucco, require extra paint because they have more surface to cover in a tiny area compared to smooth siding. Use the highest quality exterior paint your budget will allow for your project. It will look the nicest and save you money by offering better coverage and durability. Better coverage means fewer coats and fewer work hours. You’ll also go a few years longer without needing to shell out more cash for a new coat. How do you know how much paint you're paying for? Here's some helpful math: