The next step up is a semigloss finish, which has the level of reflectivity that makes an impression but can be challenging to apply. Semigloss paint provides great coverage and is easy to clean but is less forgiving when it comes to brushstrokes and overspray. The highest-end finish is full gloss, which looks very luxurious when the job is finished, but requires a surprising amount of prep work and painting experience to apply correctly. It is also on the expensive side, so it is often used sparingly on door frames, window treatments and accent walls.
I hired a painting company to paint my house and garage. Price was about $5,000.Sherwin Williams paint T-1000. When he was questioned about the paint peeling two days after he painted the garage he quit even with a contract not a very professional person. So,now I have to find someone else to paint my house.After 3 weeks of them trying to paint around the rain. The original time frame was 3-4 days.Yes 3 weeks and all that got done was a small two car garage that could have been done in two days.I know he did not prep correctly and properly I will end up having to redo the garage. I went to Sherwin Williams and got the colors.So beware even with a contract and good references.
Carefully consider the gloss level. The shiny gloss paints are easy to clean, but will make any wall blemish stand out. The flat paints will help disguise wall blemishes, but can be difficult to clean. Generally, you'll want glossier paints where there's lots of steam or cooking (baths and kitchens) and in high-traffic areas. Flatter paints are preferred for large walls and ceilings.
Prime. Dark colors, stains (once sealed), and previously unpainted surfaces (drywall, spackle, etc.) will need a primer coat, usually white. NOTE: most paint stores & home improvement centers will now tint primer (at no charge) to match fairly close to the color of the finished coat, that way two coats of primer need not be applied. Although not all surfaces need a prime coat, skip this step at your peril! Dark colors will likely show through the first -- or even the first couple-- topcoats of paint. Sealants and unpainted surfaces like spackle patches will absorb or repel moisture in a topcoat at a different level than the areas surrounding them. Applying a good primer coat will help even out these differences. Primer equalizes a wall to a uniform surface. It's like erasing a canvas before drawing a new picture. Although some will argue the point, you generally don't need to spend a great deal on primer or buy special primer. A cheap, 5 gallon (18.9 L) bucket of plain, flat white paint will usually do the trick and cover a large area. Give your primer at least 24 hours to dry (follow its instructions) before applying a topcoat.
Expect to pay between $600 to $3,500 or $1.25 to $3 per square foot to coat vinyl, with prices likely increasing for the finish. It is one of the more inexpensive siding materials to have repainted, especially with recent innovations in materials. Changing the finish on your siding is not recommended unless it's completely degraded and worn away by the weather. You can save nearly half the vinyl siding installation cost of $4 per square foot by painting rather than replacing. Before adding a new coat to vinyl siding,