High-gloss paint is the most durable and easiest to clean of all paint sheens. It's ultra-shiny, light-reflective, and hard (think appliance-paint tough). High-glass paint has too much shine for interior walls; you'd find the reflections and drywall flaws distracting. It is a good choice for areas that sticky fingers touch, though, such as cabinets, trim, and doors.
Although interior house paints can be purchased in pint-size samples or five-gallon buckets, the standard measurement is by the gallon can. A gallon can of basic water-based paint can be found on store shelves for less than $25, but the additional cost of a primer coat should be considered. One-coat paint/primer blends for most DIY projects should cost between $30 and $60 a gallon, including customized tinting. VOC levels should be lower as well. For high-end painting projects featuring designer colors or full-gloss finishes, expect to pay $60 or more per gallon.
Basic labor to paint home with favorable site conditions. Prep up to 3 hr per 100 SF - clean, scrape, sand and patch up to 4 defects per 100 SF. Caulk gaps and spot prime. Roll / brush 2 coats of paint over lightly textured ceiling/walls. Paint up to 2 doors and door trim per room. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. 129 square feet $97.99 $132.56
However, some water-based paints are easier to work with than others. The first coat of paint may not provide complete wall coverage, or the color may not be quite as saturated. Some of these problems can be addressed with a separate primer coat, but this is a time-consuming project. The ideal solution is using a higher-quality paint that combines a primer and a finish paint in a “one coat” product.
Wood is probably the most time-consuming when it comes to preparing it for paint. It has to be scraped and sanded until there isn’t a single chip or bit of loose paint in sight. Any wood siding or trim with wood rot will need to be replaced, and all cracks and holes need to be filled with epoxy filler. Brush painting and roll painting wood siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.
When painting a carpeted room, keep in mind that paint will soak through drop cloths. This is especially true of the cheaper, lightweight cloths. It helps to tape masking paper to all of the base boards before laying the drop cloths. Tuck the edges of the cloth under the paper--this will help keep it clean. You might want to invest in a hand-held masking machine--they make the job go much faster. Even after taking these precautions make sure to clean big drops or spills before they soak through and before you step on them!
Priming is compulsory if you're painting over a darker color, or on a new drywall, but it's a good idea to include this step before any paint job. A primer is necessary because it blocks any stains from bleeding through. It is also important because it prevents any blisters and paint-peeling by improving paint adhesion. Lastly, primer is a good idea as it allows complete single-coat coverage of the walls. If you want a better appearance, you can tint your primer with the final color you intend on using on the walls. Most paints today come with inbuilt primers, but an old school primer is still a better option. Before you start painting, remember to use painter's tape to cover your door frames, window sills, and any switches on the wall.
One of the most common home-improvement projects can also be one of the most enjoyable for the entire household. While some aspects of interior room painting, such as masking and “cutting in,” can require some experience and skill, applying a fresh coat of paint to a ceiling or wall or doorway is often a matter of a good brush, a paint tray, and some sweat equity. A coat of fresh paint may be all that’s required to revive a living space that’s faded a bit.
Each type of siding will need to be treated differently when it comes to primer and paint at different price points. Exterior paint costs between $35–$80 per gallon depending on the quality you choose. It’s not always true that the more you pay for your paint, the longer-lasting your paint job will be, but you do need to be careful when researching exterior paints to make sure it can weather the local elements well.
06/14/17: Renato completed an exterior painting project for our relatively large single family home in Stamford, CT last weekend. Project did not begin well especially with the prep, repair/carpentry work, but then Renato took full control and ensured that the work done was to our satisfaction. The final result is outstanding. Minor damage to window screens, gutters and plants. Ensure that your window screens, gutters, and shutters are numbered and stored indoors or if kept outdoor covered properly against the elements. The project can be extensively delayed due to rain and you may find yourself dealing with insects and/or flooding in basement and dirty/bent/ mismatched screens/gutters/shutters. Overall we had a good team working on our project and we are satisfied with the finished product. The house looks great!
We know ads can be annoying, but they’re what allow us to make all of wikiHow available for free. Please help us continue to provide you with our trusted how-to guides and videos for free by whitelisting wikiHow on your ad blocker. If you really can’t stand to see another ad again, then please consider supporting our work with a contribution to wikiHow.
It is helpful then to outline your wall with 2 or 3 inches of primer around the edges and frames before priming entirely the wall. Such a technique should help create a professional look by eliminating drips and splatters. A handheld brush is the best choice for this. For the actual primer application, roller paint can provide extra convenience. Spread the primer pain in V or W-shaped strokes. Once the primer has dried, sand down the bumps and wipe the walls down with a damp sponge.
Rome came to our house to take a look around back in May and promised me a quote by the end of the day-unlike other workers that we've had in the past, Rome stuck by his word and had it to me via email by dinnertime....something that reinforced the initial positive feeling that I had about him as he surveyed our home and listened to my ideas. We hired Rome and he and his crew began working on our home within the following couple weeks. Something we love about Rome is how knowledgable he is when it comes to the range of paint products and colors (we had a general idea that we wanted a light neutral color with a little tint of green and the easiest way for me was to have Rome narrow it down to 2-3 colors), for whatever advice or guidance we needed, he was always (and is always) a phone call away!
Scale has one of the biggest impacts on deciding whether to hire painting help or take matters into your own hands. If you want to paint your home, consider whether or not this is a realistic task to take on yourself. For instance, is your house multiple stories or a townhouse? Do you just want to paint the kitchen or the entire exterior? Once you factor in the time it takes to do the prep work and lay down multiple coats of paint, a DIY paint job can get complicated. If the house painting job is extensive, you may want to leave it to professionals.
For walls, measure the linear feet of wall space (measuring along the baseboards) for the areas to be painted (using a tape measure, laser, or both). Then multiply this by the ceiling height (usually it is 7.5 or 8). If there are 2 story areas, measure them separately, and multiply them by double the regular wall height. Then multiply the total number by 2 (for 2 coats).
If you have two weeks, a ladder and some experience, this makes an excellent DIY project. On most surfaces, it is forgiving of mistakes and easy to work with. Correcting mistakes only adds more time and not much more expense. However, a professional will get it done faster and with a better finish. If you don’t have 2 to 3 weeks to spare, find a professional painter near you today.