Priming - $30–$40/hour for labor. Many of the materials above need to be primed, but not all do. If you’re changing paint colors from dark to light or light to dark, use a color similar to the top coat. That way you’re less likely to need extra coats over the standard two. Prime with a flat or eggshell paint. You can ask your paint store to add tint to the primer to match it with the top coat color. Hammer in exposed nails and spray them with a metal primer to prevent rust.
If you have kids, pets, or occupants who will damage the walls, it is recommended to go with washable matte, eggshell, or satin, because these paints can be easily cleaned and are more durable. However, flat paint can be touched up more easily and hides imperfections better, so if you are selling the home, it is highly recommended to go with flat. Bathrooms with showers/tubs should go in semigloss- unless you are selling or want a specific design look, then use satin. 

For walls, measure the linear feet of wall space (measuring along the baseboards) for the areas to be painted (using a tape measure, laser, or both). Then multiply this by the ceiling height (usually it is 7.5 or 8). If there are 2 story areas, measure them separately, and multiply them by double the regular wall height. Then multiply the total number by 2 (for 2 coats).
Like the rest of your home’s exterior, you should start from the top down when painting exterior trim. If your window sills look particularly weather-beaten, you might want to give them a second or third coat of paint. When painting doors, paint the panels first, then the rails and stiles, and finally the edges. For more details, read up on trim painting guidelines.
Wood is probably the most time-consuming when it comes to preparing it for paint. It has to be scraped and sanded until there isn’t a single chip or bit of loose paint in sight. Any wood siding or trim with wood rot will need to be replaced, and all cracks and holes need to be filled with epoxy filler. Brush painting and roll painting wood siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.

Scale has one of the biggest impacts on deciding whether to hire painting help or take matters into your own hands. If you want to paint your home, consider whether or not this is a realistic task to take on yourself. For instance, is your house multiple stories or a townhouse? Do you just want to paint the kitchen or the entire exterior? Once you factor in the time it takes to do the prep work and lay down multiple coats of paint, a DIY paint job can get complicated. If the house painting job is extensive, you may want to leave it to professionals.
Scale has one of the biggest impacts on deciding whether to hire painting help or take matters into your own hands. If you want to paint your home, consider whether or not this is a realistic task to take on yourself. For instance, is your house multiple stories or a townhouse? Do you just want to paint the kitchen or the entire exterior? Once you factor in the time it takes to do the prep work and lay down multiple coats of paint, a DIY paint job can get complicated. If the house painting job is extensive, you may want to leave it to professionals.
For walls, measure the linear feet of wall space (measuring along the baseboards) for the areas to be painted (using a tape measure, laser, or both). Then multiply this by the ceiling height (usually it is 7.5 or 8). If there are 2 story areas, measure them separately, and multiply them by double the regular wall height. Then multiply the total number by 2 (for 2 coats).
Priming is compulsory if you're painting over a darker color, or on a new drywall, but it's a good idea to include this step before any paint job. A primer is necessary because it blocks any stains from bleeding through. It is also important because it prevents any blisters and paint-peeling by improving paint adhesion. Lastly, primer is a good idea as it allows complete single-coat coverage of the walls. If you want a better appearance, you can tint your primer with the final color you intend on using on the walls. Most paints today come with inbuilt primers, but an old school primer is still a better option. Before you start painting, remember to use painter's tape to cover your door frames, window sills, and any switches on the wall.
It is helpful then to outline your wall with 2 or 3 inches of primer around the edges and frames before priming entirely the wall. Such a technique should help create a professional look by eliminating drips and splatters. A handheld brush is the best choice for this. For the actual primer application, roller paint can provide extra convenience. Spread the primer pain in V or W-shaped strokes. Once the primer has dried, sand down the bumps and wipe the walls down with a damp sponge.

It is helpful then to outline your wall with 2 or 3 inches of primer around the edges and frames before priming entirely the wall. Such a technique should help create a professional look by eliminating drips and splatters. A handheld brush is the best choice for this. For the actual primer application, roller paint can provide extra convenience. Spread the primer pain in V or W-shaped strokes. Once the primer has dried, sand down the bumps and wipe the walls down with a damp sponge.
The Coordinator. This person will care for the needs of the rest of the workforce, fetch drinks, make sandwiches, make runs to the store for last-minute needs, cook (or arrange) lunch and dinner, make phone calls, get directions, wash brushes, etc. Don't underestimate the need for this key person! When not gainfully employed, he or she can do some rolling.
The average cost to paint the interior of a house or room is $1 to $3 per square foot. Painters charge $1,200 to $3,900 to paint the walls in a house interior, and the cost to paint a room is $350 to $850. Prices increase when including the ceilings, baseboards, and trim. Get free estimates from interior painters near you or view our cost guide below.

Paint acts as a protectant on wooden siding, slowing down the rotting process. This makes it incredibly important to fully coat the undersides of corner boards on the exterior of your home. Whether you’re undertaking a DIY house painting endeavor or have hired professionals, you should check corner boards and shutters to make sure they’re fully painted.
Supplies and Equipment – Scraping, sanding, and stripping tools and supplies; patching compound; power washer rental; primer; caulk; masking supplies; painters’ tape; ladders and scaffolding; paint pans; brushes, sprayers, and roller brushes all cost money, even if you do it yourself. Consider all of those tools and equipment sitting in your garage for the rest of your life vs. paying an experienced painter to do it all for you at a price that saves you weeks of time. Expect to pay $5–$6 per 100 sq. ft. for supplies and materials.
For trim and doors, start with 1 gallon (3.8 L) of trim paint for every 600 sq feet of floor space. Purchase more at the store if/when needed. Trim is something that is difficult to calculate exactly, and it is more time-efficient to simply start with less than you need, and go buy more after you have used up the first round of paint and determined how much you will need to finish by seeing how much you have painted so far, compared to the gallons used.
For walls, measure the linear feet of wall space (measuring along the baseboards) for the areas to be painted (using a tape measure, laser, or both). Then multiply this by the ceiling height (usually it is 7.5 or 8). If there are 2 story areas, measure them separately, and multiply them by double the regular wall height. Then multiply the total number by 2 (for 2 coats).
1300 square foot house + single car garage. House on hill, 1/2 of house is 2 story, 1/2 1 story. South side of house needs LOTS OF PREP WORK! Paint peeling & flaking off. Want eves & facia white--stucco bottom white--wood siding blue grey--window trim white--and small accents, window sash, and single garage door antique white. (Sherwin Williams paint design colors). 1 base coat, 2 finish coats. Cost in CA.
Power washing – $0.42–$1.40/sq. ft.. You might think you can save some money by power washing the exterior yourself, but homeowners can get a bit trigger-happy with a power washer in their hands. The pressure from the washer can take them unawares, breaking windows, leaking water into window frames and siding joints, and gouging wood. It’s probably wiser to use a hose and scrubbing brush. Rinse off any cleaning solutions thoroughly.
On average, expect to pay $0.60–$1.60 per square foot for exterior painting. The average for painting labor across the country is $30–$40 per hour before you pay for paint, painting supplies, location costs, and equipment. To get a very general estimate, though, painting contractors will take into account the square footage of your home and the number of stories and also factor in normal prep work.
At least 90% of painting time goes into setup, prep work, and priming. The method of prepping required varies for each type of exterior material on the home, but every project must be patched and cleaned. The more thoroughly you prep and prime your home’s exterior, the longer your paint job will last. You could save quite a bit if you do this part yourself, but it must be done correctly, or your contractor will have to go over what you missed. The prices mentioned are based on paying a contractor to do each job rather than one overall quote for the work from start to finish.
Whether you decide to do the preparation work yourself or have a professional do it as part of your project, proper preparation makes all the difference in creating a smooth and lasting finish. Do it correctly the first time or you’ll quickly end up spending more to fix peeling and chipping paint. Follow this process before starting on your home's exterior. Keep in mind that the process may vary based on your siding materials:
×