You can expect to pay between $700 to $3,000 to paint wood siding. You’ll end up spending $1 to $3 per square foot, but typically you’ll find this material is cheaper than brick or vinyl. Wood requires some type of sealant, be it paint, stain or oil. Lumber takes well to a wide variety of coverings giving you endless options for modern, contemporary or classic looks. Some things to consider when choosing wood:
Although interior house paints can be purchased in pint-size samples or five-gallon buckets, the standard measurement is by the gallon can. A gallon can of basic water-based paint can be found on store shelves for less than $25, but the additional cost of a primer coat should be considered. One-coat paint/primer blends for most DIY projects should cost between $30 and $60 a gallon, including customized tinting. VOC levels should be lower as well. For high-end painting projects featuring designer colors or full-gloss finishes, expect to pay $60 or more per gallon.
The next step up is a semigloss finish, which has the level of reflectivity that makes an impression but can be challenging to apply. Semigloss paint provides great coverage and is easy to clean but is less forgiving when it comes to brushstrokes and overspray. The highest-end finish is full gloss, which looks very luxurious when the job is finished, but requires a surprising amount of prep work and painting experience to apply correctly. It is also on the expensive side, so it is often used sparingly on door frames, window treatments and accent walls.
Your homeowner’s association might limit you as to how unique you can be with your exterior paint choices. Check with them first to make sure you don’t have to redo your hot-pink-plus-unicorns murals. It can help to drive around your neighborhood to see what your neighbors have chosen and come up with a color scheme that fits in. If you’re not sure, stores can give you small cans of paint so you can paint patches of color in discrete parts of the exterior to see how they look before purchase.

When determining the total cost of a home’s exterior project, you’ll want to include things like the trim, a garage, foundation, windows and doors. All work is calculated by square footage and sometimes by the linear foot, such as in the case of trim. Your contractor will give you a price for the entire project unless you specifically ask for each item separately.
It’ll cost anywhere from $200 to $6,000 to hire a painter. Expect small jobs, like kitchen cabinets or trim, to run $200 to $2,000. Larger projects, like your home’s exterior, range from $1,000 to $6,000. To estimate your needs, figure paying $2 to $6 per square foot or $20 to $50 per hour. Actual costs vary considerably depending on coverage area, type of work and regional cost of living differences.

House painting is no easy feat. While you may be tempted to purchase the cheapest kind of paint you can find, remember that you want the paint to look good and last a long time. If you haven’t chosen a color palette, there are a number of apartment design apps out there to spark inspiration. Once you’ve decided upon your color scheme, you’ll have to choose what kind of paint you want.


Prep the house. Wash the walls, remove wallpaper, patch, spackle, seal stains, dry and sand before you attempt to paint. Now is also the time to apply painters tape for trimming, lay drop cloths, etc. Remove all outlet and light switch face plates, collecting screws in a zip-top bag (good opportunity to wash the face plates all at once as well).[4] You can also buy your paint at this time. Don't wait until the last minute. It can take hours to mix many gallons of all your colors. Remember that traffic triples at your home-supply and hardware stores on weekends. Buy on a weekday if possible.
Many new homeowners want to change the color scheme of their rooms, either as a way to personalize the space or match the walls with existing furnishings and artwork. Interior house paint is relatively inexpensive, and it doesn’t require complicated machinery or professional-level skills to apply. There are also thousands of customizable colors available, as well as a choice of finishes, such as matte, semigloss, or gloss.
After you’ve bought your materials, prepare by removing all the furniture from the room. Next you can wash the walls and fill in any holes with spackle. Make sure to lay drop cloths or old sheets on the ground to protect the floor from paint. When you’re ready to paint, start with a layer of primer to cover all the walls. Once that has dried, you can paint with color. Use small brushes to paint edges and large rollers to cover the rest. For tips on choosing the perfect colors for your home, read on!
A gallon of paint costs $15 to $40 and covers about 350 square feet with one coat. Designer varieties can run over $100 per gallon. Your contractor pays 50 percent less than what it runs in a home improvement store. You’ll also need to spend another $20 to $100 on supplies like brushes, rollers, masking paper and plastic. A professional will have these items on-hand.

Following the same process as the primer, cut in the walls with your chosen paint. For best results, paint one wall at a time. This makes it easier to spread the paint while it’s still wet. Work from top to bottom, rolling the paint in V or W-shaped strokes. Before applying a second coat, wait two to four hours. Then proceed with the same process used for the first coat.
After you have done the multiplication, subtract about 40 sq feet per window, and about 60 sq feet per door. Divide by 400 (interior paint covers 400 sq feet per gallon). The number that remains, is how many gallons you will need. If doing multiple wall colors, then you should do this process for each room (or sets of rooms) with a particular color. 
Paint acts as a protectant on wooden siding, slowing down the rotting process. This makes it incredibly important to fully coat the undersides of corner boards on the exterior of your home. Whether you’re undertaking a DIY house painting endeavor or have hired professionals, you should check corner boards and shutters to make sure they’re fully painted.

While many professionals use paint sprayers, they can leave drips and uneven coatings in the hands of an inexperienced user. If you’re set on DIY house painting but don’t have much practice, you may want to stick to rollers and brushes. Brushes are great for edges and smaller areas, while rollers can be used to paint large and long surfaces like siding and trim.
My husband and I decided that we wanted to update our deck to have a modern cable railing...our house is very "treehouse" like, sitting high up in the words and the new cable railing really opens up the view. The guys striped the deck of its old paint and got started on taking down the old railings--they actually added an extra 6" around the perimeter of the deck to serve as a better support for the new posts that were put in and what a difference! Johnny and Robert, who worked together on the labor intensive deck, are truly artists.....cutting perfect curves into areas of the railing where we have a large boulder in our yard and using their creativity to further enforce our deck--talk about attention to detail! Its really hard to believe that we're living in the same house and thanks to Rome, there was never a time when I felt stressed or pressured to make a decision. I can't forget to mention that Rome is very reasonable when it came to giving us a quote for the entirety the work we had done, we were VERY pleasantly surprised!!
When determining the total cost of a home’s exterior project, you’ll want to include things like the trim, a garage, foundation, windows and doors. All work is calculated by square footage and sometimes by the linear foot, such as in the case of trim. Your contractor will give you a price for the entire project unless you specifically ask for each item separately.
×