Do the cleanup. When the painting is done, send the painter home and do the cleanup work yourself. This will include rolling up drop cloths and collecting scrapings, removing painter's tape (use a hair dryer on low heat to soften the adhesive), cleaning paint brushes, rollers, and other tools, replacing electric switch plates, outlet covers, and light fixtures, and sealing any leftover paint cans and storing them in a dry, temperature-controlled location.

Prepping a house costs anywhere from $0.50 to $2.50 per square foot. This is almost always included in the total project price. However, the DIYer might negotiate some discounts for completing this work on their own. Be warned, proper prep is key to the quality and durability of the finish. If you do this work yourself, the contractor might no guarantee to finished product.
1300 square foot house + single car garage. House on hill, 1/2 of house is 2 story, 1/2 1 story. South side of house needs LOTS OF PREP WORK! Paint peeling & flaking off. Want eves & facia white--stucco bottom white--wood siding blue grey--window trim white--and small accents, window sash, and single garage door antique white. (Sherwin Williams paint design colors). 1 base coat, 2 finish coats. Cost in CA.
While vinyl siding salespeople claim it never needs to be painted, it does lose its color strength over time, and the degree of fading can vary depending on which sides get the most exposure to sunlight. Perhaps it still hasn’t faded, but you don’t like the color much. You can’t go any darker than its current color, though, because the siding is designed to absorb only so much heat, and a darker color could cause it to buckle. Vinyl paint is available in many colors. Brush painting and roll painting vinyl siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.

Paper/poly drop cloths: $2 to $6 for 9x12-feet. The best of both paper and plastic, these cloths are low-cost and disposable. They absorb paint drips while providing more protection for what's underneath. They also provide some protection from slipping. Plus, you can cut paper/poly drop cloths to fit the space. But, like paper, paper/poly drop cloths can rip more easily than plastic or canvas drop cloths.


While many professionals use paint sprayers, they can leave drips and uneven coatings in the hands of an inexperienced user. If you’re set on DIY house painting but don’t have much practice, you may want to stick to rollers and brushes. Brushes are great for edges and smaller areas, while rollers can be used to paint large and long surfaces like siding and trim.
Plan the budget. Costs will vary greatly, depending on price and quality. Choosing mid to upper-grade paint, expect to pay in the area of $350.00 in paint alone for a 2000 sq. ft. house. Add another $100 to $200 in brushes, rollers, pans, tape, and other materials. Don't forget food, if you plan to feed your workforce. When it comes to materials, not all paints are equal. Some truly cover with one coat, some say they do but don't. Your costs will double if you have to apply two coats to everything, so buying the cheaper paint might cost more in the long run. Trust your paint professional salesman (to a certain degree) to tell you which paint to buy. You can generally go cheap on primer, expensive on top coats.

The Cutters. Someone with meticulous attention to detail and a steady hand should be assigned the job of "cutting in," or painting a straight edge where needed, such as along a wall where the ceiling does not get painted. Many products are available to assist, but none work as well as a person who's good at doing it freehand. Ensure this person is skilled (ask them to show you). A poor, jagged, wavy or splotched cutting-in job will jump out at you every time you walk by it. Why more than one cutter? This job is nerve-wracking and painful to hands and arms after a few days. You'll want to give this person a break after a few walls.
Basic labor to paint home with favorable site conditions. Prep up to 3 hr per 100 SF - clean, scrape, sand and patch up to 4 defects per 100 SF. Caulk gaps and spot prime. Roll / brush 2 coats of paint over lightly textured ceiling/walls. Paint up to 2 doors and door trim per room. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. 129 square feet $97.99 $132.56
At least 90% of painting time goes into setup, prep work, and priming. The method of prepping required varies for each type of exterior material on the home, but every project must be patched and cleaned. The more thoroughly you prep and prime your home’s exterior, the longer your paint job will last. You could save quite a bit if you do this part yourself, but it must be done correctly, or your contractor will have to go over what you missed. The prices mentioned are based on paying a contractor to do each job rather than one overall quote for the work from start to finish.

Some siding on older homes might need so much repair that it is more cost-effective to replace the siding rather than repair it all and then paint over it. Expect to pay between $1,550 and $3,050 for the removal and disposal of old siding and $4,000 to $14,000 for new siding and installation. Expect to pay more if the wood underneath is wet and rotten and needs structural repair work.
Priming is compulsory if you're painting over a darker color, or on a new drywall, but it's a good idea to include this step before any paint job. A primer is necessary because it blocks any stains from bleeding through. It is also important because it prevents any blisters and paint-peeling by improving paint adhesion. Lastly, primer is a good idea as it allows complete single-coat coverage of the walls. If you want a better appearance, you can tint your primer with the final color you intend on using on the walls. Most paints today come with inbuilt primers, but an old school primer is still a better option. Before you start painting, remember to use painter's tape to cover your door frames, window sills, and any switches on the wall.
Use a roller to paint the rest of the wall. A good method to use is the 'W method'. You start by painting a large 3 foot (0.91 m) square W on the wall. Then, without lifting the roller, you fill in the W.[7] You can paint a wall section-by-section, and do the walls one at a time for best results. It's generally a good idea to use an extension pole for your roller instead of standing on a ladder. Make sure that neither the extension pole nor the roller has plastic handles, as plastic handles are flexible and this makes it difficult to control the painting.
1300 square foot house + single car garage. House on hill, 1/2 of house is 2 story, 1/2 1 story. South side of house needs LOTS OF PREP WORK! Paint peeling & flaking off. Want eves & facia white--stucco bottom white--wood siding blue grey--window trim white--and small accents, window sash, and single garage door antique white. (Sherwin Williams paint design colors). 1 base coat, 2 finish coats. Cost in CA.
Use a roller to paint the rest of the wall. A good method to use is the 'W method'. You start by painting a large 3 foot (0.91 m) square W on the wall. Then, without lifting the roller, you fill in the W.[7] You can paint a wall section-by-section, and do the walls one at a time for best results. It's generally a good idea to use an extension pole for your roller instead of standing on a ladder. Make sure that neither the extension pole nor the roller has plastic handles, as plastic handles are flexible and this makes it difficult to control the painting.
Latex paint refers to water-based paint, the most popular and environmentally friendly paint. Since latex paints provide great color retention, they’re ideal for exterior walls that face a lot of weathering. Latex paints are also a good option for interior walls that are subjected to a lot of moisture, such as bathrooms and laundry rooms. Additionally, latex paints dry faster than oil-based alternatives and produce fewer odors.
In addition, paint features such as mold and mildew resistance are important cost factors. Many mold-inhibiting bathroom paints, for instance, cost substantially more than ordinary latex-acrylic paint—sometimes close to twice the cost. Also, paints that come with warranties from the manufacturer may be more expensive depending on the length of the warranty. (A two-year warranty is standard.)
In addition, paint features such as mold and mildew resistance are important cost factors. Many mold-inhibiting bathroom paints, for instance, cost substantially more than ordinary latex-acrylic paint—sometimes close to twice the cost. Also, paints that come with warranties from the manufacturer may be more expensive depending on the length of the warranty. (A two-year warranty is standard.)

Expect to pay between $600 to $3,500 or $1.25 to $3 per square foot to coat vinyl, with prices likely increasing for the finish. It is one of the more inexpensive siding materials to have repainted, especially with recent innovations in materials. Changing the finish on your siding is not recommended unless it's completely degraded and worn away by the weather. You can save nearly half the vinyl siding installation cost of $4 per square foot by painting rather than replacing. Before adding a new coat to vinyl siding,

×