While some professional painters will charge a flat fee for a painting project, most charge an hourly rate—about $25 to $100 per hour on average. Most painters will charge more for last-minute jobs (think 48 hours' notice or less), travel costs (if you live far away, the painter may want extra money for gas), or intensive prep work (e.g., removing mold or stains before painting). Also, depending on the painter, the rate may or may not include the cost of paint materials such as paint, primer, and supplies.
Prepping a house costs anywhere from $0.50 to $2.50 per square foot. This is almost always included in the total project price. However, the DIYer might negotiate some discounts for completing this work on their own. Be warned, proper prep is key to the quality and durability of the finish. If you do this work yourself, the contractor might no guarantee to finished product.
Power washing – $0.42–$1.40/sq. ft.. You might think you can save some money by power washing the exterior yourself, but homeowners can get a bit trigger-happy with a power washer in their hands. The pressure from the washer can take them unawares, breaking windows, leaking water into window frames and siding joints, and gouging wood. It’s probably wiser to use a hose and scrubbing brush. Rinse off any cleaning solutions thoroughly.
High-gloss paint is the most durable and easiest to clean of all paint sheens. It's ultra-shiny, light-reflective, and hard (think appliance-paint tough). High-glass paint has too much shine for interior walls; you'd find the reflections and drywall flaws distracting. It is a good choice for areas that sticky fingers touch, though, such as cabinets, trim, and doors.

It’ll cost you between $500 and $1,000 to paint the exterior yourself. Not including paint, it’ll cost you no more than $200 to $300 at a home improvement store like Home Depot, Lowes or Menards. You may end up spending more if you buy high-quality products from specialized shops. Professionals can get the same supplies for about half what you’ll pay.
At least 90% of painting time goes into setup, prep work, and priming. The method of prepping required varies for each type of exterior material on the home, but every project must be patched and cleaned. The more thoroughly you prep and prime your home’s exterior, the longer your paint job will last. You could save quite a bit if you do this part yourself, but it must be done correctly, or your contractor will have to go over what you missed. The prices mentioned are based on paying a contractor to do each job rather than one overall quote for the work from start to finish.
High-gloss paint is the most durable and easiest to clean of all paint sheens. It's ultra-shiny, light-reflective, and hard (think appliance-paint tough). High-glass paint has too much shine for interior walls; you'd find the reflections and drywall flaws distracting. It is a good choice for areas that sticky fingers touch, though, such as cabinets, trim, and doors.
After you have done the multiplication, subtract about 40 sq feet per window, and about 60 sq feet per door. Divide by 400 (interior paint covers 400 sq feet per gallon). The number that remains, is how many gallons you will need. If doing multiple wall colors, then you should do this process for each room (or sets of rooms) with a particular color. 

Most house painting professionals will agree that two coats of paint are needed on a home. Using one coat of paint may look sufficient, but will not hold up over time. Two coats of paint, on the other hand, provide protection, washability, and help retain the true color of the paint. If you are still toying with the idea of hiring a professional painter, ask if two coats of paint are included in the pricing estimate.
For walls, measure the linear feet of wall space (measuring along the baseboards) for the areas to be painted (using a tape measure, laser, or both). Then multiply this by the ceiling height (usually it is 7.5 or 8). If there are 2 story areas, measure them separately, and multiply them by double the regular wall height. Then multiply the total number by 2 (for 2 coats).
If the exterior of your home is unpainted or has been scraped and sanded, you will want to lay down a coat of primer. Make sure that the primer you’re using is right for the surface you’re painting. While most surfaces can be treated with acrylic primer, some surfaces, like cedar and redwood, require oil-based primers. The oil stops the wood tannins from bleeding through the topcoat.
One of the most common home-improvement projects can also be one of the most enjoyable for the entire household. While some aspects of interior room painting, such as masking and “cutting in,” can require some experience and skill, applying a fresh coat of paint to a ceiling or wall or doorway is often a matter of a good brush, a paint tray, and some sweat equity. A coat of fresh paint may be all that’s required to revive a living space that’s faded a bit.
There are a few ways to prevent your interior house paint from fading — or stop it from getting worse. One simple fix is to install shades or curtains to block incoming sunlight. If you don’t want to shut out the light, you can also tint your windows with a UV protectant. However, fading shouldn’t be much of an issue if you use high-quality interior house paint.
Many new homeowners want to change the color scheme of their rooms, either as a way to personalize the space or match the walls with existing furnishings and artwork. Interior house paint is relatively inexpensive, and it doesn’t require complicated machinery or professional-level skills to apply. There are also thousands of customizable colors available, as well as a choice of finishes, such as matte, semigloss, or gloss.
If you are seeking a few gallons of interior house paint for your home, office, or apartment, read our helpful shopping guide. We have compared dozens of brands of interior house paints currently on the market and have compiled a short list of our favorites. Topping that list is Benjamin Moore Ultra Spec 500 Interior Paint, a low-odor, VOC-free formula from one of the most trusted brands in paint.
Prime. Dark colors, stains (once sealed), and previously unpainted surfaces (drywall, spackle, etc.) will need a primer coat, usually white. NOTE: most paint stores & home improvement centers will now tint primer (at no charge) to match fairly close to the color of the finished coat, that way two coats of primer need not be applied.[6] Although not all surfaces need a prime coat, skip this step at your peril! Dark colors will likely show through the first -- or even the first couple-- topcoats of paint. Sealants and unpainted surfaces like spackle patches will absorb or repel moisture in a topcoat at a different level than the areas surrounding them. Applying a good primer coat will help even out these differences. Primer equalizes a wall to a uniform surface. It's like erasing a canvas before drawing a new picture. Although some will argue the point, you generally don't need to spend a great deal on primer or buy special primer. A cheap, 5 gallon (18.9 L) bucket of plain, flat white paint will usually do the trick and cover a large area. Give your primer at least 24 hours to dry (follow its instructions) before applying a topcoat.
Two aesthetic things to consider when selecting a finish are how shiny you'd like the surface to be and whether or not you want to hide any imperfections on the surface to be painted. Generally, higher-gloss paint finishes reflect light better than lower-gloss finishes, like eggshell and matte. That makes them shiny, and also causes them to highlight flaws in walls and ceilings.

A. Many homeowners purchase small sample cans of interior paint at a local home improvement store and apply each one to a different section of the wall. You should look at each color under different lighting conditions, such as natural daylight and nighttime lighting. You'll also want to consider the general color scheme of the furnishings, artwork and flooring that will be in that space.

1300 square foot house + single car garage. House on hill, 1/2 of house is 2 story, 1/2 1 story. South side of house needs LOTS OF PREP WORK! Paint peeling & flaking off. Want eves & facia white--stucco bottom white--wood siding blue grey--window trim white--and small accents, window sash, and single garage door antique white. (Sherwin Williams paint design colors). 1 base coat, 2 finish coats. Cost in CA.
If you have kids, pets, or occupants who will damage the walls, it is recommended to go with washable matte, eggshell, or satin, because these paints can be easily cleaned and are more durable. However, flat paint can be touched up more easily and hides imperfections better, so if you are selling the home, it is highly recommended to go with flat. Bathrooms with showers/tubs should go in semigloss- unless you are selling or want a specific design look, then use satin. 
My husband and I hired Rome and his crew to paint the exterior of our home and we couldn't be happier with the finished product! We purchased a Contemporary style home that was built in 1985 and what was once a gloomy, sad shade of a blue/grey, in desperate need of a facelift. Now, this house really feels like a "new" home (complete with an updated deck...read on for more)!
×