Summer is the busiest time of the year for painters, with some booked up to six months ahead of time, so book well in advance. Homebuyers getting VA loans have run into difficulties with this, so if you’re getting a VA renovation/rehabilitation loan, get all your painting and inspection estimates and work dates booked before you fill out any paperwork with a closing date, or the house will not be move-in ready in time.
For trim and doors, start with 1 gallon (3.8 L) of trim paint for every 600 sq feet of floor space. Purchase more at the store if/when needed. Trim is something that is difficult to calculate exactly, and it is more time-efficient to simply start with less than you need, and go buy more after you have used up the first round of paint and determined how much you will need to finish by seeing how much you have painted so far, compared to the gallons used.
When determining the total cost of a home’s exterior project, you’ll want to include things like the trim, a garage, foundation, windows and doors. All work is calculated by square footage and sometimes by the linear foot, such as in the case of trim. Your contractor will give you a price for the entire project unless you specifically ask for each item separately.
There are a number of measures you can take to prevent mold on the exterior of your home. Anti-mold paint works to stop mold from spreading. Still, anti-mold paint does deteriorate when exposed to prolonged sunlight and moisture. To prevent mold damage from spreading, it’s best to act fast. In order to ensure that all the mold is eradicated, we recommend calling a professional mold removal company.
Use semi gloss for hallways because walls there are more likely to be touched, bumped or otherwise marked over time (semi gloss cleans more easily). However, use flat for a living room. Flat will help hide imperfections in the walls. If you want the same color in both the hall and living room, then no problem. Use flat in the living room, semi gloss in the hall, making the threshold the transition point.
Before hiring a painter, you should get a detailed estimate from them. This should include costs for labor, materials, paint, and the timeframe of the project. Covering details upfront will prevent issues from emerging later on. Ask the painter if they charge for travel time, whether their estimate includes pressure washing and caulking, and any other questions you might have.
A more user-friendly option is a water-based “latex” paint, which blends acrylic pigments with a thin base for easy application with a brush or paint sprayer. Although many water-based interior paints are promoted as one-coat wonders, there can still be a need for an initial primer coat followed by one or two coats of latex paint. Water-based paints are very low in VOCs, which means minimal odors during the drying period. Most spills can be wiped away without the need for chemical cleaners, and clothing containing latex paint can be laundered in water and detergent. Water-based paint is a good choice for first-time DIYers and their younger assistants.
There are a few ways to prevent your interior house paint from fading — or stop it from getting worse. One simple fix is to install shades or curtains to block incoming sunlight. If you don’t want to shut out the light, you can also tint your windows with a UV protectant. However, fading shouldn’t be much of an issue if you use high-quality interior house paint.
06/14/17: Renato completed an exterior painting project for our relatively large single family home in Stamford, CT last weekend. Project did not begin well especially with the prep, repair/carpentry work, but then Renato took full control and ensured that the work done was to our satisfaction. The final result is outstanding. Minor damage to window screens, gutters and plants. Ensure that your window screens, gutters, and shutters are numbered and stored indoors or if kept outdoor covered properly against the elements. The project can be extensively delayed due to rain and you may find yourself dealing with insects and/or flooding in basement and dirty/bent/ mismatched screens/gutters/shutters. Overall we had a good team working on our project and we are satisfied with the finished product. The house looks great!
The Cutters. Someone with meticulous attention to detail and a steady hand should be assigned the job of "cutting in," or painting a straight edge where needed, such as along a wall where the ceiling does not get painted. Many products are available to assist, but none work as well as a person who's good at doing it freehand. Ensure this person is skilled (ask them to show you). A poor, jagged, wavy or splotched cutting-in job will jump out at you every time you walk by it. Why more than one cutter? This job is nerve-wracking and painful to hands and arms after a few days. You'll want to give this person a break after a few walls.