Like the rest of your home’s exterior, you should start from the top down when painting exterior trim. If your window sills look particularly weather-beaten, you might want to give them a second or third coat of paint. When painting doors, paint the panels first, then the rails and stiles, and finally the edges. For more details, read up on trim painting guidelines.
Paint acts as a protectant on wooden siding, slowing down the rotting process. This makes it incredibly important to fully coat the undersides of corner boards on the exterior of your home. Whether you’re undertaking a DIY house painting endeavor or have hired professionals, you should check corner boards and shutters to make sure they’re fully painted.
Dirt and grime are bound to develop on exterior house paint after some time. Luckily, you can easily clean your home with a pressure washer. It’s recommended that you pressure wash your home about five or six years after the initial paint job. For areas like porches and overhangs, you should clean them more often. Taking a garden hose to these areas once a year should do the trick.
Painting a brand new house with smooth surfaces dramatically reduces prep work. On the other hand, if you’re painting an old home with peeling walls or siding, it’s going to take a lot longer. When deciding whether to hire house painting professionals or do it yourself, take the current state of the paint into consideration. If you’re not up for the challenge of scraping and sanding for hours, you should hire help to get the best results.
On average, expect to pay $0.60–$1.60 per square foot for exterior painting. The average for painting labor across the country is $30–$40 per hour before you pay for paint, painting supplies, location costs, and equipment. To get a very general estimate, though, painting contractors will take into account the square footage of your home and the number of stories and also factor in normal prep work.
Priming - $30–$40/hour for labor. Many of the materials above need to be primed, but not all do. If you’re changing paint colors from dark to light or light to dark, use a color similar to the top coat. That way you’re less likely to need extra coats over the standard two. Prime with a flat or eggshell paint. You can ask your paint store to add tint to the primer to match it with the top coat color. Hammer in exposed nails and spray them with a metal primer to prevent rust.

Are you looking for the best painting company in Barrie with an outstanding and affordable house painter? Check on Mitchell of Change of Colour Painting. As a painting contractor, they do interior and exterior painting services for homes and businesses. They are primarily serving Barrie, Ontario, but can cater to residences and businesses in Orillia, Burks Falls, Horshoe Valley, Newmarket, Muskoka, Elmvale, Richmond Hill, and Ajax. Request a free quote by calling 705-279-2557 or email at [email protected]

For trim and doors, start with 1 gallon (3.8 L) of trim paint for every 600 sq feet of floor space. Purchase more at the store if/when needed. Trim is something that is difficult to calculate exactly, and it is more time-efficient to simply start with less than you need, and go buy more after you have used up the first round of paint and determined how much you will need to finish by seeing how much you have painted so far, compared to the gallons used.
Like the rest of your home’s exterior, you should start from the top down when painting exterior trim. If your window sills look particularly weather-beaten, you might want to give them a second or third coat of paint. When painting doors, paint the panels first, then the rails and stiles, and finally the edges. For more details, read up on trim painting guidelines.

YP - The Real Yellow PagesSM - helps you find the right local businesses to meet your specific needs. Search results are sorted by a combination of factors to give you a set of choices in response to your search criteria. These factors are similar to those you might use to determine which business to select from a local Yellow Pages directory, including proximity to where you are searching, expertise in the specific services or products you need, and comprehensive business information to help evaluate a business's suitability for you. “Preferred” listings, or those with featured website buttons, indicate YP advertisers who directly provide information about their businesses to help consumers make more informed buying decisions. YP advertisers receive higher placement in the default ordering of search results and may appear in sponsored listings on the top, side, or bottom of the search results page.
Plan the budget. Costs will vary greatly, depending on price and quality. Choosing mid to upper-grade paint, expect to pay in the area of $350.00 in paint alone for a 2000 sq. ft. house. Add another $100 to $200 in brushes, rollers, pans, tape, and other materials. Don't forget food, if you plan to feed your workforce. When it comes to materials, not all paints are equal. Some truly cover with one coat, some say they do but don't. Your costs will double if you have to apply two coats to everything, so buying the cheaper paint might cost more in the long run. Trust your paint professional salesman (to a certain degree) to tell you which paint to buy. You can generally go cheap on primer, expensive on top coats.
Compare offers. The painter offering the lowest rate may not always be the best painter for the job. Indeed, the total cost isn't the only factor to consider when choosing between multiple bids. You'll want to look at contracts side by side to ensure you're making an apples-to-apples comparison. Are the same materials being used? Are the same services included? Does the painter provide a warranty?
Containing either natural oils or a synthetic alkylate, oil-based paints are more durable than latex paints. Oil-based paints should be used on surfaces where you want the finish to last for a long time. While this kind of paint has a stronger odor and takes longer to dry, its durability is unmatchable. The strength of oil-based paints makes them a great choice for moldings and trims.
Prime. Dark colors, stains (once sealed), and previously unpainted surfaces (drywall, spackle, etc.) will need a primer coat, usually white. NOTE: most paint stores & home improvement centers will now tint primer (at no charge) to match fairly close to the color of the finished coat, that way two coats of primer need not be applied.[6] Although not all surfaces need a prime coat, skip this step at your peril! Dark colors will likely show through the first -- or even the first couple-- topcoats of paint. Sealants and unpainted surfaces like spackle patches will absorb or repel moisture in a topcoat at a different level than the areas surrounding them. Applying a good primer coat will help even out these differences. Primer equalizes a wall to a uniform surface. It's like erasing a canvas before drawing a new picture. Although some will argue the point, you generally don't need to spend a great deal on primer or buy special primer. A cheap, 5 gallon (18.9 L) bucket of plain, flat white paint will usually do the trick and cover a large area. Give your primer at least 24 hours to dry (follow its instructions) before applying a topcoat.
Summer is the busiest time of the year for painters, with some booked up to six months ahead of time, so book well in advance. Homebuyers getting VA loans have run into difficulties with this, so if you’re getting a VA renovation/rehabilitation loan, get all your painting and inspection estimates and work dates booked before you fill out any paperwork with a closing date, or the house will not be move-in ready in time.
Painting exterior windows depend on the size of the window and the number of panes. To calculate the price for windows larger than 15 sq. ft., add 1’ to each side of the window and then multiply width x length. Add two sq. ft. for each window pane for painting the mullions, muntins, and sash and then multiply your total sq. ft. by $84/100 sq. ft. So a 4’ x 4’ window with 4 panes will come to a total of 44 sq. ft. x $84/100 sq. ft. = $37.
Supplies and Equipment – Scraping, sanding, and stripping tools and supplies; patching compound; power washer rental; primer; caulk; masking supplies; painters’ tape; ladders and scaffolding; paint pans; brushes, sprayers, and roller brushes all cost money, even if you do it yourself. Consider all of those tools and equipment sitting in your garage for the rest of your life vs. paying an experienced painter to do it all for you at a price that saves you weeks of time. Expect to pay $5–$6 per 100 sq. ft. for supplies and materials.
Premium Plus Interior Ceiling Paint 1 gal. features Premium Plus Interior Ceiling Paint 1 gal. features a durable, acrylic-latex formula that is specifically designed for use on previously painted or primed interior ceilings. This spatter resistant formula minimizes glare and provides a mildew-resistant finish. This formula also maintains the original acoustical ceiling properties.  More + Product Details Close
Get estimates from several contractors, request and contact references, search for complaints at the Better Business Bureau[12] and check that the company is properly bonded and insured, as well as licensed in your state[13] . Only pay a small deposit, and don't pay the entire amount until the job is finished to your complete satisfaction (both painting and cleanup).
While many professionals use paint sprayers, they can leave drips and uneven coatings in the hands of an inexperienced user. If you’re set on DIY house painting but don’t have much practice, you may want to stick to rollers and brushes. Brushes are great for edges and smaller areas, while rollers can be used to paint large and long surfaces like siding and trim.
The average cost to paint a house exterior is $2,500 for a 2,400 sq. ft. two-story home, with most homeowners paying between $1,800 and $3,200. The final cost comes out to around $0.60 to $1.60 per square foot. With so many variables in pricing, you need to take them all into account before coming to your own estimate on how much your painting project will end up costing.
One of the most common home-improvement projects can also be one of the most enjoyable for the entire household. While some aspects of interior room painting, such as masking and “cutting in,” can require some experience and skill, applying a fresh coat of paint to a ceiling or wall or doorway is often a matter of a good brush, a paint tray, and some sweat equity. A coat of fresh paint may be all that’s required to revive a living space that’s faded a bit.
Two aesthetic things to consider when selecting a finish are how shiny you'd like the surface to be and whether or not you want to hide any imperfections on the surface to be painted. Generally, higher-gloss paint finishes reflect light better than lower-gloss finishes, like eggshell and matte. That makes them shiny, and also causes them to highlight flaws in walls and ceilings.
House painting is often an important step of the moving process. If your home or rental property is in need of a fresh coat (or two) of paint, you’ll have to decide how you want to proceed. Do you hire a professional painter or break out the ladder and purchase the exterior house paint yourself? Depending on the scale of the project, your time frame, and whether it’s an exterior or interior house painting job, the answer might be different. Read up on our house painting tips and tricks to see what choice is the best for you.
×