Specialty painting, like murals and trompe l’oeil, costs $40 to $50 per hour. Paint might range between $75 to $90. The professional’s skill and experience are also determining factors. While a freelance artist might charge $25 to $30 an hour, a very skilled professional might charge $80 or more. Some might also charge $60 or more for a consultation.
The BEHR PREMIUM PLUS 5 gal. Flat The BEHR PREMIUM PLUS 5 gal. Flat Interior Ceiling Paint features a durable, splatter-resistant acrylic-latex formulation. It is designed for application on previously-painted or primed texture, popcorn and acoustic-style ceilings. The paint offers excellent coverage and resists mildew growth to help ensure that the finish remains attractive over time.  More + Product Details Close

The following guidelines will set you up for success. First, start at the top and work down. Second, paint out of the sun’s glare, since the sun will cause the paint to dry too quickly and flake or blister. To avoid marks, try to brush from one wet surface onto another. If you do have to paint onto a dry surface, overlap the wet paint onto the dry surface by several inches.
Compare offers. The painter offering the lowest rate may not always be the best painter for the job. Indeed, the total cost isn't the only factor to consider when choosing between multiple bids. You'll want to look at contracts side by side to ensure you're making an apples-to-apples comparison. Are the same materials being used? Are the same services included? Does the painter provide a warranty?

Basic labor to paint home with favorable site conditions. Prep up to 3 hr per 100 SF - clean, scrape, sand and patch up to 4 defects per 100 SF. Caulk gaps and spot prime. Roll / brush 2 coats of paint over lightly textured ceiling/walls. Paint up to 2 doors and door trim per room. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. 129 square feet $97.99 $132.56
1300 square foot house + single car garage. House on hill, 1/2 of house is 2 story, 1/2 1 story. South side of house needs LOTS OF PREP WORK! Paint peeling & flaking off. Want eves & facia white--stucco bottom white--wood siding blue grey--window trim white--and small accents, window sash, and single garage door antique white. (Sherwin Williams paint design colors). 1 base coat, 2 finish coats. Cost in CA.
Begin prepping your walls by removing any outlet covers or lighting fixtures (if possible). Next, inspect your walls for any defects. If you encounter cracks, dents, or holes in your walls, simply fill them in with caulk or spackling compound. There are also a number of DIY tips to fill nail holes. Once your repairs dry, smooth them down with sandpaper and wipe the walls down with a damp sponge.
Wood is probably the most time-consuming when it comes to preparing it for paint. It has to be scraped and sanded until there isn’t a single chip or bit of loose paint in sight. Any wood siding or trim with wood rot will need to be replaced, and all cracks and holes need to be filled with epoxy filler. Brush painting and roll painting wood siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.
A single gallon of paint can run anywhere from $20 to $80 per gallon. Professionals get a contractor discount of anywhere from 25 to 50 percent. For rough siding, like stucco, you’ll need to use 10% to 20% more paint. Some textures, like wood and stucco, require extra paint because they have more surface to cover in a tiny area compared to smooth siding. Use the highest quality exterior paint your budget will allow for your project. It will look the nicest and save you money by offering better coverage and durability. Better coverage means fewer coats and fewer work hours. You’ll also go a few years longer without needing to shell out more cash for a new coat. How do you know how much paint you're paying for? Here's some helpful math:
×