Some paints are two-in-one paint and primer products, or so-called "self-priming paints." These paints are designed to seal and cover surfaces in one coat. But, here's the secret: though it's called a paint-and-primer-in-one product, there's actually no primer in the mix—what you're really working with is just a thicker paint that often doesn't perform as well as using separate primer and paint.
If you are painting for a client, skip the paint in the bucket, and use large trays. For faster completion and still quality results the 5 gallon bucket and strainer work great as well as a wood filler, 5-in-1 tool, screw gun (drill), metal joint compound tray, metal putty knife, wide drywall knife, mini hand-held paint containers (for brushes), and a mini-roller and corresponding nap (for edging, after cutting in with brush on the bottom, top and sides of wall, and the sides of ceilings, so that you don't see brush lines).

While some professional painters will charge a flat fee for a painting project, most charge an hourly rate—about $25 to $100 per hour on average. Most painters will charge more for last-minute jobs (think 48 hours' notice or less), travel costs (if you live far away, the painter may want extra money for gas), or intensive prep work (e.g., removing mold or stains before painting). Also, depending on the painter, the rate may or may not include the cost of paint materials such as paint, primer, and supplies.


If you have kids, pets, or occupants who will damage the walls, it is recommended to go with washable matte, eggshell, or satin, because these paints can be easily cleaned and are more durable. However, flat paint can be touched up more easily and hides imperfections better, so if you are selling the home, it is highly recommended to go with flat. Bathrooms with showers/tubs should go in semigloss- unless you are selling or want a specific design look, then use satin. 
The Cutters. Someone with meticulous attention to detail and a steady hand should be assigned the job of "cutting in," or painting a straight edge where needed, such as along a wall where the ceiling does not get painted. Many products are available to assist, but none work as well as a person who's good at doing it freehand. Ensure this person is skilled (ask them to show you). A poor, jagged, wavy or splotched cutting-in job will jump out at you every time you walk by it. Why more than one cutter? This job is nerve-wracking and painful to hands and arms after a few days. You'll want to give this person a break after a few walls.
Interview past clients. Talking to former customers is always a good idea. But, to ensure you're getting honest feedback — not just feedback from people who have been handpicked by the painter to sing their praises — ask to speak to the painter's three most recent clients. When you speak to them, ask about specifics. Find out whether the painters showed up on time, protected furniture from paint spills, kept the house clean, completed the project on schedule, and of course, what it cost to paint their house.
Supplies and Equipment – Scraping, sanding, and stripping tools and supplies; patching compound; power washer rental; primer; caulk; masking supplies; painters’ tape; ladders and scaffolding; paint pans; brushes, sprayers, and roller brushes all cost money, even if you do it yourself. Consider all of those tools and equipment sitting in your garage for the rest of your life vs. paying an experienced painter to do it all for you at a price that saves you weeks of time. Expect to pay $5–$6 per 100 sq. ft. for supplies and materials.
Plan the workforce. If you intend to not hire a professional crew, you'll need lots of help. There are many jobs to be done. First there's the furniture moving, then wall preparation, floor covering, materials gathering and prep, cleaning, and don't forget everyone will have to eat. It can easily take a team of five people a full ten days to paint a two-story (approx 2000 sq.ft.) home. Get as many people to help as you can. If some can only come one or two days, great. Maybe others can fill in. Ensure you plan with your workforce members in mind. They'll need plenty of time to arrange days away from work. Identify a few key personnel:
Painting is one of the quickest and easiest ways to give your home's interior a facelift with dramatic results. Fortunately, it doesn't have to be that difficult. Home improvement stores offer samples that you can take home. With these samples, you can try a few colors in large swaths on your wall to see the how the paint interacts with the room's natural light. Compare it against design elements like pillows or furniture to see whether it will work with your overall décor.
Many new homeowners want to change the color scheme of their rooms, either as a way to personalize the space or match the walls with existing furnishings and artwork. Interior house paint is relatively inexpensive, and it doesn’t require complicated machinery or professional-level skills to apply. There are also thousands of customizable colors available, as well as a choice of finishes, such as matte, semigloss, or gloss.
 My husband and I decided that we wanted to update our deck to have a modern cable railing...our house is very "treehouse" like, sitting high up in the words and the new cable railing really opens up the view. The guys striped the deck of its old paint and got started on taking down the old railings--they actually added an extra 6" around the perimeter of the deck to serve as a better support for the new posts that were put in and what a difference! Johnny and Robert, who worked together on the labor intensive deck, are truly artists.....cutting perfect curves into areas of the railing where we have a large boulder in our yard and using their creativity to further enforce our deck--talk about attention to detail! Its really hard to believe that we're living in the same house and thanks to Rome, there was never a time when I felt stressed or pressured to make a decision. I can't forget to mention that Rome is very reasonable when it came to giving us a quote for the entirety the work we had done, we were VERY pleasantly surprised!! 

On average, expect to pay $0.60–$1.60 per square foot for exterior painting. The average for painting labor across the country is $30–$40 per hour before you pay for paint, painting supplies, location costs, and equipment. To get a very general estimate, though, painting contractors will take into account the square footage of your home and the number of stories and also factor in normal prep work.
Specialty painting, like murals and trompe l’oeil, costs $40 to $50 per hour. Paint might range between $75 to $90. The professional’s skill and experience are also determining factors. While a freelance artist might charge $25 to $30 an hour, a very skilled professional might charge $80 or more. Some might also charge $60 or more for a consultation.

For trim and doors, start with 1 gallon (3.8 L) of trim paint for every 600 sq feet of floor space. Purchase more at the store if/when needed. Trim is something that is difficult to calculate exactly, and it is more time-efficient to simply start with less than you need, and go buy more after you have used up the first round of paint and determined how much you will need to finish by seeing how much you have painted so far, compared to the gallons used.
The Cutters. Someone with meticulous attention to detail and a steady hand should be assigned the job of "cutting in," or painting a straight edge where needed, such as along a wall where the ceiling does not get painted. Many products are available to assist, but none work as well as a person who's good at doing it freehand. Ensure this person is skilled (ask them to show you). A poor, jagged, wavy or splotched cutting-in job will jump out at you every time you walk by it. Why more than one cutter? This job is nerve-wracking and painful to hands and arms after a few days. You'll want to give this person a break after a few walls.
It is helpful then to outline your wall with 2 or 3 inches of primer around the edges and frames before priming entirely the wall. Such a technique should help create a professional look by eliminating drips and splatters. A handheld brush is the best choice for this. For the actual primer application, roller paint can provide extra convenience. Spread the primer pain in V or W-shaped strokes. Once the primer has dried, sand down the bumps and wipe the walls down with a damp sponge.

Painters will agree that you should always aim to paint in the part of the year when it’s least likely to rain, has low humidity, and when the temperatures are above 50 F. Rain can wash wet latex paint off a wall, and temps that are too low can affect the way the paint sticks to the walls. Some painters will add additives to the paint if working in very high temperatures to slow down the drying time.
Determine the coverage area for each color and estimate the number of gallons you'll need for each. For odd walls with angled ceilings, make your best guess. If you're not comfortable doing this, measure the wall at its highest height and multiply that by its width. Now subtract the lowest height from the highest height, multiply that number by the width, cut that answer in half, and finally subtract that new number from the original height by width. That should give you the wall area.
Following the same process as the primer, cut in the walls with your chosen paint. For best results, paint one wall at a time. This makes it easier to spread the paint while it’s still wet. Work from top to bottom, rolling the paint in V or W-shaped strokes. Before applying a second coat, wait two to four hours. Then proceed with the same process used for the first coat.
Prep the house. Wash the walls, remove wallpaper, patch, spackle, seal stains, dry and sand before you attempt to paint. Now is also the time to apply painters tape for trimming, lay drop cloths, etc. Remove all outlet and light switch face plates, collecting screws in a zip-top bag (good opportunity to wash the face plates all at once as well).[4] You can also buy your paint at this time. Don't wait until the last minute. It can take hours to mix many gallons of all your colors. Remember that traffic triples at your home-supply and hardware stores on weekends. Buy on a weekday if possible.
Prime. Dark colors, stains (once sealed), and previously unpainted surfaces (drywall, spackle, etc.) will need a primer coat, usually white. NOTE: most paint stores & home improvement centers will now tint primer (at no charge) to match fairly close to the color of the finished coat, that way two coats of primer need not be applied.[6] Although not all surfaces need a prime coat, skip this step at your peril! Dark colors will likely show through the first -- or even the first couple-- topcoats of paint. Sealants and unpainted surfaces like spackle patches will absorb or repel moisture in a topcoat at a different level than the areas surrounding them. Applying a good primer coat will help even out these differences. Primer equalizes a wall to a uniform surface. It's like erasing a canvas before drawing a new picture. Although some will argue the point, you generally don't need to spend a great deal on primer or buy special primer. A cheap, 5 gallon (18.9 L) bucket of plain, flat white paint will usually do the trick and cover a large area. Give your primer at least 24 hours to dry (follow its instructions) before applying a topcoat.
For walls, measure the linear feet of wall space (measuring along the baseboards) for the areas to be painted (using a tape measure, laser, or both). Then multiply this by the ceiling height (usually it is 7.5 or 8). If there are 2 story areas, measure them separately, and multiply them by double the regular wall height. Then multiply the total number by 2 (for 2 coats).
It is helpful then to outline your wall with 2 or 3 inches of primer around the edges and frames before priming entirely the wall. Such a technique should help create a professional look by eliminating drips and splatters. A handheld brush is the best choice for this. For the actual primer application, roller paint can provide extra convenience. Spread the primer pain in V or W-shaped strokes. Once the primer has dried, sand down the bumps and wipe the walls down with a damp sponge.
Determine the coverage area for each color and estimate the number of gallons you'll need for each. For odd walls with angled ceilings, make your best guess. If you're not comfortable doing this, measure the wall at its highest height and multiply that by its width. Now subtract the lowest height from the highest height, multiply that number by the width, cut that answer in half, and finally subtract that new number from the original height by width. That should give you the wall area.
Paint supplies cost anywhere from $10 to $100 or more depending on what you need. Painters will typically provide most of the supplies for a project, but sometimes they will allow you to pay for solely labor if you provide all the materials yourself. You might decide to do a DIY paint job down the road. In which case having these supplies on-hand will save you time and money.
There are a number of measures you can take to prevent mold on the exterior of your home. Anti-mold paint works to stop mold from spreading. Still, anti-mold paint does deteriorate when exposed to prolonged sunlight and moisture. To prevent mold damage from spreading, it’s best to act fast. In order to ensure that all the mold is eradicated, we recommend calling a professional mold removal company.
Supplies and Equipment – Scraping, sanding, and stripping tools and supplies; patching compound; power washer rental; primer; caulk; masking supplies; painters’ tape; ladders and scaffolding; paint pans; brushes, sprayers, and roller brushes all cost money, even if you do it yourself. Consider all of those tools and equipment sitting in your garage for the rest of your life vs. paying an experienced painter to do it all for you at a price that saves you weeks of time. Expect to pay $5–$6 per 100 sq. ft. for supplies and materials.
There are a number of measures you can take to prevent mold on the exterior of your home. Anti-mold paint works to stop mold from spreading. Still, anti-mold paint does deteriorate when exposed to prolonged sunlight and moisture. To prevent mold damage from spreading, it’s best to act fast. In order to ensure that all the mold is eradicated, we recommend calling a professional mold removal company.
YP - The Real Yellow PagesSM - helps you find the right local businesses to meet your specific needs. Search results are sorted by a combination of factors to give you a set of choices in response to your search criteria. These factors are similar to those you might use to determine which business to select from a local Yellow Pages directory, including proximity to where you are searching, expertise in the specific services or products you need, and comprehensive business information to help evaluate a business's suitability for you. “Preferred” listings, or those with featured website buttons, indicate YP advertisers who directly provide information about their businesses to help consumers make more informed buying decisions. YP advertisers receive higher placement in the default ordering of search results and may appear in sponsored listings on the top, side, or bottom of the search results page.
While some professional painters will charge a flat fee for a painting project, most charge an hourly rate—about $25 to $100 per hour on average. Most painters will charge more for last-minute jobs (think 48 hours' notice or less), travel costs (if you live far away, the painter may want extra money for gas), or intensive prep work (e.g., removing mold or stains before painting). Also, depending on the painter, the rate may or may not include the cost of paint materials such as paint, primer, and supplies.
Use semi gloss for hallways because walls there are more likely to be touched, bumped or otherwise marked over time (semi gloss cleans more easily). However, use flat for a living room. Flat will help hide imperfections in the walls. If you want the same color in both the hall and living room, then no problem. Use flat in the living room, semi gloss in the hall, making the threshold the transition point.
Our highly skilled and experienced house painters can transform the interior or exterior of your home into a work of art you’ll be proud to show off to your guests. Our home painters follow a time-tested process that involves paying attention to the smallest details. We also work quickly and efficiently, while making every effort to minimize disruptions to your family’s lifestyle. And when you factor in our affordable rates, it’s no wonder that Shoreline Painting is homeowners’ top choice when searching for professional painters in CT.
Each type of siding will need to be treated differently when it comes to primer and paint at different price points. Exterior paint costs between $35–$80 per gallon depending on the quality you choose. It’s not always true that the more you pay for your paint, the longer-lasting your paint job will be, but you do need to be careful when researching exterior paints to make sure it can weather the local elements well.
Plan the schedule. Get a grip on the time it will take to bring the project to fruition. Plan for time to move furniture, wall prep, cut in, the painting itself, eating and breaks, and don't forget cleanup and bringing furniture back in. As you plan, err on the side of prudence. Unforeseen events will slow you down, so allow time for these. Remember, this is a multi-day project. Don't try to fit too much into a day. If you move faster than planned, great!
Repainting is key to maintaining exterior house paint. The material that your home is made of affects how often you should repaint. For instance, wood-paneled homes need to be repainted twice as often as those made of stucco. Environmental factors also play a role in how often you should repaint, since harsh climates can be hard on a home. As a general rule of thumb, homeowners should repaint their home every six to ten years.
An example of the wall measurement would be: 40 linear feet of bedroom space, x 8 wall height, =  320, x 2 = 640. Minus 1 door (60) and 2 windows (80) = 500 sq feet being painted. Then divide the 500 by 400 (sq feet per gallon), and you get 1.25 gallons (4.73 L) needed for that room. For this, you'd need 1 gallon (3.8 L) and 1 US-quart (950 ml). If the amount it comes out to is over 1.3, we recommend just getting 2 gallons (7.6 L) so that you have leftovers if needed, since 2 US quarts (2,000 ml) costs essentially the same as a gallon in most stores.
Paint supplies cost anywhere from $10 to $100 or more depending on what you need. Painters will typically provide most of the supplies for a project, but sometimes they will allow you to pay for solely labor if you provide all the materials yourself. You might decide to do a DIY paint job down the road. In which case having these supplies on-hand will save you time and money.
The following guidelines will set you up for success. First, start at the top and work down. Second, paint out of the sun’s glare, since the sun will cause the paint to dry too quickly and flake or blister. To avoid marks, try to brush from one wet surface onto another. If you do have to paint onto a dry surface, overlap the wet paint onto the dry surface by several inches.
×