Wood is probably the most time-consuming when it comes to preparing it for paint. It has to be scraped and sanded until there isn’t a single chip or bit of loose paint in sight. Any wood siding or trim with wood rot will need to be replaced, and all cracks and holes need to be filled with epoxy filler. Brush painting and roll painting wood siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.
Most house painting professionals will agree that two coats of paint are needed on a home. Using one coat of paint may look sufficient, but will not hold up over time. Two coats of paint, on the other hand, provide protection, washability, and help retain the true color of the paint. If you are still toying with the idea of hiring a professional painter, ask if two coats of paint are included in the pricing estimate.
Prepping a house costs anywhere from $0.50 to $2.50 per square foot. This is almost always included in the total project price. However, the DIYer might negotiate some discounts for completing this work on their own. Be warned, proper prep is key to the quality and durability of the finish. If you do this work yourself, the contractor might no guarantee to finished product.
At least 90% of painting time goes into setup, prep work, and priming. The method of prepping required varies for each type of exterior material on the home, but every project must be patched and cleaned. The more thoroughly you prep and prime your home’s exterior, the longer your paint job will last. You could save quite a bit if you do this part yourself, but it must be done correctly, or your contractor will have to go over what you missed. The prices mentioned are based on paying a contractor to do each job rather than one overall quote for the work from start to finish.
For walls, measure the linear feet of wall space (measuring along the baseboards) for the areas to be painted (using a tape measure, laser, or both). Then multiply this by the ceiling height (usually it is 7.5 or 8). If there are 2 story areas, measure them separately, and multiply them by double the regular wall height. Then multiply the total number by 2 (for 2 coats).
Throughout its 35 plus years in business, Shoreline has done extensive work throughout Fairfield County, including cities such as Darien, Westport, Greenwich and New Canaan. Our service area also extends to Westchester County, NY, New York City, and Rhode Island. Browse our portfolio of completed projects for examples of our superior workmanship throughout our operating territory.
However, some water-based paints are easier to work with than others. The first coat of paint may not provide complete wall coverage, or the color may not be quite as saturated. Some of these problems can be addressed with a separate primer coat, but this is a time-consuming project. The ideal solution is using a higher-quality paint that combines a primer and a finish paint in a “one coat” product.
Use semi gloss for hallways because walls there are more likely to be touched, bumped or otherwise marked over time (semi gloss cleans more easily). However, use flat for a living room. Flat will help hide imperfections in the walls. If you want the same color in both the hall and living room, then no problem. Use flat in the living room, semi gloss in the hall, making the threshold the transition point.
Prepping a house costs anywhere from $0.50 to $2.50 per square foot. This is almost always included in the total project price. However, the DIYer might negotiate some discounts for completing this work on their own. Be warned, proper prep is key to the quality and durability of the finish. If you do this work yourself, the contractor might no guarantee to finished product.
×