For trim and doors, start with 1 gallon (3.8 L) of trim paint for every 600 sq feet of floor space. Purchase more at the store if/when needed. Trim is something that is difficult to calculate exactly, and it is more time-efficient to simply start with less than you need, and go buy more after you have used up the first round of paint and determined how much you will need to finish by seeing how much you have painted so far, compared to the gallons used.
Use semi gloss for hallways because walls there are more likely to be touched, bumped or otherwise marked over time (semi gloss cleans more easily). However, use flat for a living room. Flat will help hide imperfections in the walls. If you want the same color in both the hall and living room, then no problem. Use flat in the living room, semi gloss in the hall, making the threshold the transition point.
My husband and I decided that we wanted to update our deck to have a modern cable railing...our house is very "treehouse" like, sitting high up in the words and the new cable railing really opens up the view. The guys striped the deck of its old paint and got started on taking down the old railings--they actually added an extra 6" around the perimeter of the deck to serve as a better support for the new posts that were put in and what a difference! Johnny and Robert, who worked together on the labor intensive deck, are truly artists.....cutting perfect curves into areas of the railing where we have a large boulder in our yard and using their creativity to further enforce our deck--talk about attention to detail! Its really hard to believe that we're living in the same house and thanks to Rome, there was never a time when I felt stressed or pressured to make a decision. I can't forget to mention that Rome is very reasonable when it came to giving us a quote for the entirety the work we had done, we were VERY pleasantly surprised!!
The Cutters. Someone with meticulous attention to detail and a steady hand should be assigned the job of "cutting in," or painting a straight edge where needed, such as along a wall where the ceiling does not get painted. Many products are available to assist, but none work as well as a person who's good at doing it freehand. Ensure this person is skilled (ask them to show you). A poor, jagged, wavy or splotched cutting-in job will jump out at you every time you walk by it. Why more than one cutter? This job is nerve-wracking and painful to hands and arms after a few days. You'll want to give this person a break after a few walls.
A. Many homeowners purchase small sample cans of interior paint at a local home improvement store and apply each one to a different section of the wall. You should look at each color under different lighting conditions, such as natural daylight and nighttime lighting. You'll also want to consider the general color scheme of the furnishings, artwork and flooring that will be in that space.
Prep the house. Wash the walls, remove wallpaper, patch, spackle, seal stains, dry and sand before you attempt to paint. Now is also the time to apply painters tape for trimming, lay drop cloths, etc. Remove all outlet and light switch face plates, collecting screws in a zip-top bag (good opportunity to wash the face plates all at once as well). You can also buy your paint at this time. Don't wait until the last minute. It can take hours to mix many gallons of all your colors. Remember that traffic triples at your home-supply and hardware stores on weekends. Buy on a weekday if possible.
However, some water-based paints are easier to work with than others. The first coat of paint may not provide complete wall coverage, or the color may not be quite as saturated. Some of these problems can be addressed with a separate primer coat, but this is a time-consuming project. The ideal solution is using a higher-quality paint that combines a primer and a finish paint in a “one coat” product.
Homeowners report that painting a home’s exterior costs an average of $2,923 with a typical range between $1,734 and $4,119. The average price per square foot ranges from $0.50 to $3.50 depending on your location, condition of your exterior and accessibility. Stucco and brick cost an average of $1 per square foot more than vinyl or wood. The average 2,500 square feet home costs an average of $4,000, though it can range from $1,250 to $8,750.