The Cutters. Someone with meticulous attention to detail and a steady hand should be assigned the job of "cutting in," or painting a straight edge where needed, such as along a wall where the ceiling does not get painted. Many products are available to assist, but none work as well as a person who's good at doing it freehand. Ensure this person is skilled (ask them to show you). A poor, jagged, wavy or splotched cutting-in job will jump out at you every time you walk by it. Why more than one cutter? This job is nerve-wracking and painful to hands and arms after a few days. You'll want to give this person a break after a few walls.
While some professional painters will charge a flat fee for a painting project, most charge an hourly rate—about $25 to $100 per hour on average. Most painters will charge more for last-minute jobs (think 48 hours' notice or less), travel costs (if you live far away, the painter may want extra money for gas), or intensive prep work (e.g., removing mold or stains before painting). Also, depending on the painter, the rate may or may not include the cost of paint materials such as paint, primer, and supplies.
When painting a carpeted room, keep in mind that paint will soak through drop cloths. This is especially true of the cheaper, lightweight cloths. It helps to tape masking paper to all of the base boards before laying the drop cloths. Tuck the edges of the cloth under the paper--this will help keep it clean. You might want to invest in a hand-held masking machine--they make the job go much faster. Even after taking these precautions make sure to clean big drops or spills before they soak through and before you step on them!
It’ll cost you between $500 and $1,000 to paint the exterior yourself. Not including paint, it’ll cost you no more than $200 to $300 at a home improvement store like Home Depot, Lowes or Menards. You may end up spending more if you buy high-quality products from specialized shops. Professionals can get the same supplies for about half what you’ll pay.
Although interior house paints can be purchased in pint-size samples or five-gallon buckets, the standard measurement is by the gallon can. A gallon can of basic water-based paint can be found on store shelves for less than $25, but the additional cost of a primer coat should be considered. One-coat paint/primer blends for most DIY projects should cost between $30 and $60 a gallon, including customized tinting. VOC levels should be lower as well. For high-end painting projects featuring designer colors or full-gloss finishes, expect to pay $60 or more per gallon.
Scale has one of the biggest impacts on deciding whether to hire painting help or take matters into your own hands. If you want to paint your home, consider whether or not this is a realistic task to take on yourself. For instance, is your house multiple stories or a townhouse? Do you just want to paint the kitchen or the entire exterior? Once you factor in the time it takes to do the prep work and lay down multiple coats of paint, a DIY paint job can get complicated. If the house painting job is extensive, you may want to leave it to professionals.
Basic labor to paint home with favorable site conditions. Prep up to 3 hr per 100 SF - clean, scrape, sand and patch up to 4 defects per 100 SF. Caulk gaps and spot prime. Roll / brush 2 coats of paint over lightly textured ceiling/walls. Paint up to 2 doors and door trim per room. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. 129 square feet $97.99 $132.56
There are a number of measures you can take to prevent mold on the exterior of your home. Anti-mold paint works to stop mold from spreading. Still, anti-mold paint does deteriorate when exposed to prolonged sunlight and moisture. To prevent mold damage from spreading, it’s best to act fast. In order to ensure that all the mold is eradicated, we recommend calling a professional mold removal company.
You can expect to pay between $700 to $3,000 to paint wood siding. You’ll end up spending $1 to $3 per square foot, but typically you’ll find this material is cheaper than brick or vinyl. Wood requires some type of sealant, be it paint, stain or oil. Lumber takes well to a wide variety of coverings giving you endless options for modern, contemporary or classic looks. Some things to consider when choosing wood: