First, if you need it, we have it — all the paint for you home — every color you can imagine, in the finish you need, for every surface. Second, we’ can help narrow down your wall paint color choice until you decide on the right paint for your project. Of course, our paint associates at your local store can help pick our paint for your home. Pick up some paint swatches or order paint samples online so you can picture what it will look like. 
Paper/poly drop cloths: $2 to $6 for 9x12-feet. The best of both paper and plastic, these cloths are low-cost and disposable. They absorb paint drips while providing more protection for what's underneath. They also provide some protection from slipping. Plus, you can cut paper/poly drop cloths to fit the space. But, like paper, paper/poly drop cloths can rip more easily than plastic or canvas drop cloths.
Begin prepping your walls by removing any outlet covers or lighting fixtures (if possible). Next, inspect your walls for any defects. If you encounter cracks, dents, or holes in your walls, simply fill them in with caulk or spackling compound. There are also a number of DIY tips to fill nail holes. Once your repairs dry, smooth them down with sandpaper and wipe the walls down with a damp sponge.
It’ll cost anywhere from $200 to $6,000 to hire a painter. Expect small jobs, like kitchen cabinets or trim, to run $200 to $2,000. Larger projects, like your home’s exterior, range from $1,000 to $6,000. To estimate your needs, figure paying $2 to $6 per square foot or $20 to $50 per hour. Actual costs vary considerably depending on coverage area, type of work and regional cost of living differences.

Use a roller to paint the rest of the wall. A good method to use is the 'W method'. You start by painting a large 3 foot (0.91 m) square W on the wall. Then, without lifting the roller, you fill in the W.[7] You can paint a wall section-by-section, and do the walls one at a time for best results. It's generally a good idea to use an extension pole for your roller instead of standing on a ladder. Make sure that neither the extension pole nor the roller has plastic handles, as plastic handles are flexible and this makes it difficult to control the painting.
The following guidelines will set you up for success. First, start at the top and work down. Second, paint out of the sun’s glare, since the sun will cause the paint to dry too quickly and flake or blister. To avoid marks, try to brush from one wet surface onto another. If you do have to paint onto a dry surface, overlap the wet paint onto the dry surface by several inches.
If you have kids, pets, or occupants who will damage the walls, it is recommended to go with washable matte, eggshell, or satin, because these paints can be easily cleaned and are more durable. However, flat paint can be touched up more easily and hides imperfections better, so if you are selling the home, it is highly recommended to go with flat. Bathrooms with showers/tubs should go in semigloss- unless you are selling or want a specific design look, then use satin. 
The Coordinator. This person will care for the needs of the rest of the workforce, fetch drinks, make sandwiches, make runs to the store for last-minute needs, cook (or arrange) lunch and dinner, make phone calls, get directions, wash brushes, etc. Don't underestimate the need for this key person! When not gainfully employed, he or she can do some rolling.

Containing either natural oils or a synthetic alkylate, oil-based paints are more durable than latex paints. Oil-based paints should be used on surfaces where you want the finish to last for a long time. While this kind of paint has a stronger odor and takes longer to dry, its durability is unmatchable. The strength of oil-based paints makes them a great choice for moldings and trims.
Most of a projects price is the cost of labor at $25 to $75 per hour. However, most contractors bid out based on the entire project which includes all work hours. Hourly rates are only useful if your pro asks to do the job as “time and materials.” However, be wary of this pricing structure, it usually shows the contractor is uncertain how long the project will take.
×