Prime. Dark colors, stains (once sealed), and previously unpainted surfaces (drywall, spackle, etc.) will need a primer coat, usually white. NOTE: most paint stores & home improvement centers will now tint primer (at no charge) to match fairly close to the color of the finished coat, that way two coats of primer need not be applied. Although not all surfaces need a prime coat, skip this step at your peril! Dark colors will likely show through the first -- or even the first couple-- topcoats of paint. Sealants and unpainted surfaces like spackle patches will absorb or repel moisture in a topcoat at a different level than the areas surrounding them. Applying a good primer coat will help even out these differences. Primer equalizes a wall to a uniform surface. It's like erasing a canvas before drawing a new picture. Although some will argue the point, you generally don't need to spend a great deal on primer or buy special primer. A cheap, 5 gallon (18.9 L) bucket of plain, flat white paint will usually do the trick and cover a large area. Give your primer at least 24 hours to dry (follow its instructions) before applying a topcoat.
Painters will agree that you should always aim to paint in the part of the year when it’s least likely to rain, has low humidity, and when the temperatures are above 50 F. Rain can wash wet latex paint off a wall, and temps that are too low can affect the way the paint sticks to the walls. Some painters will add additives to the paint if working in very high temperatures to slow down the drying time.
Get quotes from at least three painters. To answer the ultimate question, how much does it cost to paint a house, you'll want to obtain several bids before deciding who gets your business. Have the painters come to view your property in person before they write you a formal bid. This way there will be no surprises when the painters show up to perform the work.
After you have done the multiplication, subtract about 40 sq feet per window, and about 60 sq feet per door. Divide by 400 (interior paint covers 400 sq feet per gallon). The number that remains, is how many gallons you will need. If doing multiple wall colors, then you should do this process for each room (or sets of rooms) with a particular color.
An example of the wall measurement would be: 40 linear feet of bedroom space, x 8 wall height, = 320, x 2 = 640. Minus 1 door (60) and 2 windows (80) = 500 sq feet being painted. Then divide the 500 by 400 (sq feet per gallon), and you get 1.25 gallons (4.73 L) needed for that room. For this, you'd need 1 gallon (3.8 L) and 1 US-quart (950 ml). If the amount it comes out to is over 1.3, we recommend just getting 2 gallons (7.6 L) so that you have leftovers if needed, since 2 US quarts (2,000 ml) costs essentially the same as a gallon in most stores.
The next step up is a semigloss finish, which has the level of reflectivity that makes an impression but can be challenging to apply. Semigloss paint provides great coverage and is easy to clean but is less forgiving when it comes to brushstrokes and overspray. The highest-end finish is full gloss, which looks very luxurious when the job is finished, but requires a surprising amount of prep work and painting experience to apply correctly. It is also on the expensive side, so it is often used sparingly on door frames, window treatments and accent walls.
While you may choose to paint a door, ground-level window trim and other parts of your house’s exterior, it’s really a job best left to the professionals. One of the main reasons is experience. An experienced painter knows how to handle the prep work, spot problems and identify sources of future trouble, all while getting the job done more efficiently. They are also experienced with spending long hours on tall ladders. If you want high-quality work, it’s best to hire a professional painter near you.
Homeowners report that painting a home’s exterior costs an average of $2,923 with a typical range between $1,734 and $4,119. The average price per square foot ranges from $0.50 to $3.50 depending on your location, condition of your exterior and accessibility. Stucco and brick cost an average of $1 per square foot more than vinyl or wood. The average 2,500 square feet home costs an average of $4,000, though it can range from $1,250 to $8,750.