Wood is probably the most time-consuming when it comes to preparing it for paint. It has to be scraped and sanded until there isn’t a single chip or bit of loose paint in sight. Any wood siding or trim with wood rot will need to be replaced, and all cracks and holes need to be filled with epoxy filler. Brush painting and roll painting wood siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.

Are you looking for the best painting company in Barrie with an outstanding and affordable house painter? Check on Mitchell of Change of Colour Painting. As a painting contractor, they do interior and exterior painting services for homes and businesses. They are primarily serving Barrie, Ontario, but can cater to residences and businesses in Orillia, Burks Falls, Horshoe Valley, Newmarket, Muskoka, Elmvale, Richmond Hill, and Ajax. Request a free quote by calling 705-279-2557 or email at [email protected]
While some professional painters will charge a flat fee for a painting project, most charge an hourly rate—about $25 to $100 per hour on average. Most painters will charge more for last-minute jobs (think 48 hours' notice or less), travel costs (if you live far away, the painter may want extra money for gas), or intensive prep work (e.g., removing mold or stains before painting). Also, depending on the painter, the rate may or may not include the cost of paint materials such as paint, primer, and supplies.
Use a roller to paint the rest of the wall. A good method to use is the 'W method'. You start by painting a large 3 foot (0.91 m) square W on the wall. Then, without lifting the roller, you fill in the W.[7] You can paint a wall section-by-section, and do the walls one at a time for best results. It's generally a good idea to use an extension pole for your roller instead of standing on a ladder. Make sure that neither the extension pole nor the roller has plastic handles, as plastic handles are flexible and this makes it difficult to control the painting.
Specialty painting, like murals and trompe l’oeil, costs $40 to $50 per hour. Paint might range between $75 to $90. The professional’s skill and experience are also determining factors. While a freelance artist might charge $25 to $30 an hour, a very skilled professional might charge $80 or more. Some might also charge $60 or more for a consultation.

Two aesthetic things to consider when selecting a finish are how shiny you'd like the surface to be and whether or not you want to hide any imperfections on the surface to be painted. Generally, higher-gloss paint finishes reflect light better than lower-gloss finishes, like eggshell and matte. That makes them shiny, and also causes them to highlight flaws in walls and ceilings.
First, if you need it, we have it — all the paint for you home — every color you can imagine, in the finish you need, for every surface. Second, we’ can help narrow down your wall paint color choice until you decide on the right paint for your project. Of course, our paint associates at your local store can help pick our paint for your home. Pick up some paint swatches or order paint samples online so you can picture what it will look like. 

For trim and doors, start with 1 gallon (3.8 L) of trim paint for every 600 sq feet of floor space. Purchase more at the store if/when needed. Trim is something that is difficult to calculate exactly, and it is more time-efficient to simply start with less than you need, and go buy more after you have used up the first round of paint and determined how much you will need to finish by seeing how much you have painted so far, compared to the gallons used.
BEHR Premium Cabinet and Trim Interior Semi-Gloss Enamel BEHR Premium Cabinet and Trim Interior Semi-Gloss Enamel offers excellent flow and leveling and dries to a hard, durable finish. Its outstanding block resistance allows for quick return to service, making it ideal for use on cabinets, trim, doors, windows, shutters and woodwork. This product can also be used on other properly prepared and primed substrates, such as drywall, masonry and metal.  More + Product Details Close

If the exterior of your home is unpainted or has been scraped and sanded, you will want to lay down a coat of primer. Make sure that the primer you’re using is right for the surface you’re painting. While most surfaces can be treated with acrylic primer, some surfaces, like cedar and redwood, require oil-based primers. The oil stops the wood tannins from bleeding through the topcoat.
The Ceiling. For ceilings, flat is recommended, except semigloss or satin should be used in bathrooms with showers/tubs. Some customers opt to go with a different finish for ceilings in general, to create a specific design look, i.e. high gloss ceilings on dining room tray ceiling to make a statement, or eggshell ceilings throughout to look modern and make a statement. 
Remove any outlet covers or lighting fixtures (if possible). Then scrutinize the walls for any defects. Simply fill them in with caulk or spackling compound if you encounter cracks, dents, or holes in your walls and trims. There are also tips and tricks for filling nail holes. Once done with the repair, smoothen the wall down with sandpaper and then wipe it with a damp sponge.
Painting interior walls does not require professional aptitude, but it is still a skill that arrives with a learning curve. The most challenging part of any interior painting project is the prep work, which often involves cleaning the walls, masking off windows, doorways and baseboards, then carefully “cutting in” the paint around the edges. Once the masking and cutting in are finished, volunteers with handheld or roller brushes can usually fill in the rest of the space with little trouble.
Priming - $30–$40/hour for labor. Many of the materials above need to be primed, but not all do. If you’re changing paint colors from dark to light or light to dark, use a color similar to the top coat. That way you’re less likely to need extra coats over the standard two. Prime with a flat or eggshell paint. You can ask your paint store to add tint to the primer to match it with the top coat color. Hammer in exposed nails and spray them with a metal primer to prevent rust.
Compare offers. The painter offering the lowest rate may not always be the best painter for the job. Indeed, the total cost isn't the only factor to consider when choosing between multiple bids. You'll want to look at contracts side by side to ensure you're making an apples-to-apples comparison. Are the same materials being used? Are the same services included? Does the painter provide a warranty?
On average, expect to pay $0.60–$1.60 per square foot for exterior painting. The average for painting labor across the country is $30–$40 per hour before you pay for paint, painting supplies, location costs, and equipment. To get a very general estimate, though, painting contractors will take into account the square footage of your home and the number of stories and also factor in normal prep work.

Throughout its 35 plus years in business, Shoreline has done extensive work throughout Fairfield County, including cities such as Darien, Westport, Greenwich and New Canaan. Our service area also extends to Westchester County, NY, New York City, and Rhode Island. Browse our portfolio of completed projects for examples of our superior workmanship throughout our operating territory.
Like the rest of your home’s exterior, you should start from the top down when painting exterior trim. If your window sills look particularly weather-beaten, you might want to give them a second or third coat of paint. When painting doors, paint the panels first, then the rails and stiles, and finally the edges. For more details, read up on trim painting guidelines.
Your contractor will sweep or scrub the concrete first with a dry brush, and then clean it thoroughly with trisodium phosphate (TSP) and warm water, then let it dry. TSP is a mostly alkaline solution that does a great job cleaning grease and oil off concrete surfaces. Brush painting concrete siding costs $138 per 100 sq. ft., roll painting costs $50 per 100 sq. ft., and spray painting $32 per 100 sq. ft.
Power washing – $0.42–$1.40/sq. ft.. You might think you can save some money by power washing the exterior yourself, but homeowners can get a bit trigger-happy with a power washer in their hands. The pressure from the washer can take them unawares, breaking windows, leaking water into window frames and siding joints, and gouging wood. It’s probably wiser to use a hose and scrubbing brush. Rinse off any cleaning solutions thoroughly.
A moisture meter will let your contractor know if there’s moisture in the stucco before starting. The wetter the material, the less ready it is to be sanded, painted, finished or covered. Your contractor will use a premixed stucco repair patch material to fill any small holes and will paint on dry days to avoid sealing in water. Painting rough stucco requires more paint. Brush painting stucco costs $112 per 100 sq. ft., roll painting costs $55 per 100 sq. ft., and spray painting stucco costs $25 per 100 sq. ft.
The Coordinator. This person will care for the needs of the rest of the workforce, fetch drinks, make sandwiches, make runs to the store for last-minute needs, cook (or arrange) lunch and dinner, make phone calls, get directions, wash brushes, etc. Don't underestimate the need for this key person! When not gainfully employed, he or she can do some rolling.
Practicing ladder safety is key. When using an extension ladder, always test that its resting at the right angle by putting your toes against the feet of the ladder and extend your arms outwards. At the proper angle, you should be able to rest your hands on the rung in front of you comfortably. When on a ladder, you should always keep your hands free and maintain a steady center of gravity.
Flat, or matte finish on the no-shine end of the finish spectrum. A friend to walls that have something to hide, flat or matte paint (the terms are interchangeable) soaks up — rather than reflects — light, has the most pigment, and provides the most coverage. It's good for adults' bedrooms and other interior rooms that won't be roughed up by kids. That's because it's tough to clean without taking paint off.
If you have kids, pets, or occupants who will damage the walls, it is recommended to go with washable matte, eggshell, or satin, because these paints can be easily cleaned and are more durable. However, flat paint can be touched up more easily and hides imperfections better, so if you are selling the home, it is highly recommended to go with flat. Bathrooms with showers/tubs should go in semigloss- unless you are selling or want a specific design look, then use satin. 
Paint acts as a protectant on wooden siding, slowing down the rotting process. This makes it incredibly important to fully coat the undersides of corner boards on the exterior of your home. Whether you’re undertaking a DIY house painting endeavor or have hired professionals, you should check corner boards and shutters to make sure they’re fully painted.
There are a few ways to prevent your interior house paint from fading — or stop it from getting worse. One simple fix is to install shades or curtains to block incoming sunlight. If you don’t want to shut out the light, you can also tint your windows with a UV protectant. However, fading shouldn’t be much of an issue if you use high-quality interior house paint.
If you have two weeks, a ladder and some experience, this makes an excellent DIY project. On most surfaces, it is forgiving of mistakes and easy to work with. Correcting mistakes only adds more time and not much more expense. However, a professional will get it done faster and with a better finish. If you don’t have 2 to 3 weeks to spare, find a professional painter near you today.
×