Your contractor will sweep or scrub the concrete first with a dry brush, and then clean it thoroughly with trisodium phosphate (TSP) and warm water, then let it dry. TSP is a mostly alkaline solution that does a great job cleaning grease and oil off concrete surfaces. Brush painting concrete siding costs $138 per 100 sq. ft., roll painting costs $50 per 100 sq. ft., and spray painting $32 per 100 sq. ft.
In addition to working on our house, Rome has now done jobs for my in-laws, brother, cousin and even a family friend (so its fair to say that I've seen a variety of his work in person) and all of us have been more than pleased with the finished products! If you're browsing for someone to "get the job done", end your search NOW and give Rome a call, you won't regret it!
Compare offers. The painter offering the lowest rate may not always be the best painter for the job. Indeed, the total cost isn't the only factor to consider when choosing between multiple bids. You'll want to look at contracts side by side to ensure you're making an apples-to-apples comparison. Are the same materials being used? Are the same services included? Does the painter provide a warranty?
Some siding on older homes might need so much repair that it is more cost-effective to replace the siding rather than repair it all and then paint over it. Expect to pay between $1,550 and $3,050 for the removal and disposal of old siding and $4,000 to $14,000 for new siding and installation. Expect to pay more if the wood underneath is wet and rotten and needs structural repair work.
For walls, measure the linear feet of wall space (measuring along the baseboards) for the areas to be painted (using a tape measure, laser, or both). Then multiply this by the ceiling height (usually it is 7.5 or 8). If there are 2 story areas, measure them separately, and multiply them by double the regular wall height. Then multiply the total number by 2 (for 2 coats).
After you’ve bought your materials, prepare by removing all the furniture from the room. Next you can wash the walls and fill in any holes with spackle. Make sure to lay drop cloths or old sheets on the ground to protect the floor from paint. When you’re ready to paint, start with a layer of primer to cover all the walls. Once that has dried, you can paint with color. Use small brushes to paint edges and large rollers to cover the rest. For tips on choosing the perfect colors for your home, read on!
Exterior paint averages $25-$40 a gallon, and a 3,000-square-foot home takes 15 or more gallons of paint, or $375-$600 just for the paint. However, really premium paint can cost $50-$100 a gallon, or $750-$1,500 for that large home. Doing it yourself also requires renting a pressure washer or sprayer for $50-$100 a day; extra-long ladders or scaffolding at $20-$75 daily; and a power sprayer for $50-$100 daily, plus masking tape, drop cloths and other supplies. However, it's possible to paint a large, two-story house for materials-only costs of $400-$600.
Test different paint swatches. The last thing you want to do is paint a whole room and then decide you despise the color (yes, it happens!). Try out different paint colors on the surface before choosing the paint that you want. Buying sample sizes will help you save money. The caveat: paint color samples are not real paint, so if you try to finish or touch up a project with samples, the paint will fade.
Do the cleanup. When the painting is done, send the painter home and do the cleanup work yourself. This will include rolling up drop cloths and collecting scrapings, removing painter's tape (use a hair dryer on low heat to soften the adhesive), cleaning paint brushes, rollers, and other tools, replacing electric switch plates, outlet covers, and light fixtures, and sealing any leftover paint cans and storing them in a dry, temperature-controlled location.
Paint can be expensive. Buying too much paint is particularly frustrating since paint stores won’t refund an already tinted gallon of paint. That’s why it’s recommended to first buy around 80% of the estimated paint you need and then purchase the remainder when you’re almost finished. Factors such as square footage, surface type, and quality of paint all play into how much paint you’ll need. Paint stores should be able to help you determine how much paint you need for a specific job. If you aren’t sure how much paint to buy, ask a salesperson for advice.
Prepping a house costs anywhere from $0.50 to $2.50 per square foot. This is almost always included in the total project price. However, the DIYer might negotiate some discounts for completing this work on their own. Be warned, proper prep is key to the quality and durability of the finish. If you do this work yourself, the contractor might no guarantee to finished product.