Supplies and Equipment – Scraping, sanding, and stripping tools and supplies; patching compound; power washer rental; primer; caulk; masking supplies; painters’ tape; ladders and scaffolding; paint pans; brushes, sprayers, and roller brushes all cost money, even if you do it yourself. Consider all of those tools and equipment sitting in your garage for the rest of your life vs. paying an experienced painter to do it all for you at a price that saves you weeks of time. Expect to pay $5–$6 per 100 sq. ft. for supplies and materials.
If you are seeking a few gallons of interior house paint for your home, office, or apartment, read our helpful shopping guide. We have compared dozens of brands of interior house paints currently on the market and have compiled a short list of our favorites. Topping that list is Benjamin Moore Ultra Spec 500 Interior Paint, a low-odor, VOC-free formula from one of the most trusted brands in paint.
A moisture meter will let your contractor know if there’s moisture in the stucco before starting. The wetter the material, the less ready it is to be sanded, painted, finished or covered. Your contractor will use a premixed stucco repair patch material to fill any small holes and will paint on dry days to avoid sealing in water. Painting rough stucco requires more paint. Brush painting stucco costs $112 per 100 sq. ft., roll painting costs $55 per 100 sq. ft., and spray painting stucco costs $25 per 100 sq. ft.
While vinyl siding salespeople claim it never needs to be painted, it does lose its color strength over time, and the degree of fading can vary depending on which sides get the most exposure to sunlight. Perhaps it still hasn’t faded, but you don’t like the color much. You can’t go any darker than its current color, though, because the siding is designed to absorb only so much heat, and a darker color could cause it to buckle. Vinyl paint is available in many colors. Brush painting and roll painting vinyl siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.
Whether you decide to do the preparation work yourself or have a professional do it as part of your project, proper preparation makes all the difference in creating a smooth and lasting finish. Do it correctly the first time or you’ll quickly end up spending more to fix peeling and chipping paint. Follow this process before starting on your home's exterior. Keep in mind that the process may vary based on your siding materials:
Our highly skilled and experienced house painters can transform the interior or exterior of your home into a work of art you’ll be proud to show off to your guests. Our home painters follow a time-tested process that involves paying attention to the smallest details. We also work quickly and efficiently, while making every effort to minimize disruptions to your family’s lifestyle. And when you factor in our affordable rates, it’s no wonder that Shoreline Painting is homeowners’ top choice when searching for professional painters in CT.
Stripping – $54–$151/100 sq. ft.. “The principle of paint strippers is penetration of the paint film by the molecules of the active ingredient, causing its swelling; this volume increase causes internal strains, which, together with the weakening of the layer's adhesion to the underlying surface, leads to separation of the layer of the paint from the substrate.”— Wikipedia. All the stripper will do is soften the paint. You’ll still have to scrub or scrape it off.
Flat, or matte finish on the no-shine end of the finish spectrum. A friend to walls that have something to hide, flat or matte paint (the terms are interchangeable) soaks up — rather than reflects — light, has the most pigment, and provides the most coverage. It's good for adults' bedrooms and other interior rooms that won't be roughed up by kids. That's because it's tough to clean without taking paint off.
Painting a brand new house with smooth surfaces dramatically reduces prep work. On the other hand, if you’re painting an old home with peeling walls or siding, it’s going to take a lot longer. When deciding whether to hire house painting professionals or do it yourself, take the current state of the paint into consideration. If you’re not up for the challenge of scraping and sanding for hours, you should hire help to get the best results.
At least 90% of painting time goes into setup, prep work, and priming. The method of prepping required varies for each type of exterior material on the home, but every project must be patched and cleaned. The more thoroughly you prep and prime your home’s exterior, the longer your paint job will last. You could save quite a bit if you do this part yourself, but it must be done correctly, or your contractor will have to go over what you missed. The prices mentioned are based on paying a contractor to do each job rather than one overall quote for the work from start to finish.
According to Craftsman National Estimator, "High time difficulty factors for surface preparation and painting. Painting takes longer when heights exceed 8' above the floor. Productivity is lower when an application requires a roller pole or wand on a spray gun or when work is done from a ladder or scaffold. When painting above 8', apply the following factors:
Painters will agree that you should always aim to paint in the part of the year when it’s least likely to rain, has low humidity, and when the temperatures are above 50 F. Rain can wash wet latex paint off a wall, and temps that are too low can affect the way the paint sticks to the walls. Some painters will add additives to the paint if working in very high temperatures to slow down the drying time.
It’ll cost you between $500 and $1,000 to paint the exterior yourself. Not including paint, it’ll cost you no more than $200 to $300 at a home improvement store like Home Depot, Lowes or Menards. You may end up spending more if you buy high-quality products from specialized shops. Professionals can get the same supplies for about half what you’ll pay.