I had Renato pain both interior and exterior (ongoing as I type). So far these projects have gone about as well as we could've hoped. Renato is great he is very good at staying on top of things and his crews are polite, work quickly and keep things cleaned up on a daily basis. I would highly recommend General Painting to anyone, including family and friends (which we've already done by the way). Thanks Renato.

Following the same process as the primer, cut in the walls with your chosen paint. For best results, paint one wall at a time. This makes it easier to spread the paint while it’s still wet. Work from top to bottom, rolling the paint in V or W-shaped strokes. Before applying a second coat, wait two to four hours. Then proceed with the same process used for the first coat.


Stripping – $54–$151/100 sq. ft.. “The principle of paint strippers is penetration of the paint film by the molecules of the active ingredient, causing its swelling; this volume increase causes internal strains, which, together with the weakening of the layer's adhesion to the underlying surface, leads to separation of the layer of the paint from the substrate.”— Wikipedia. All the stripper will do is soften the paint. You’ll still have to scrub or scrape it off.
There are a few ways to prevent your interior house paint from fading — or stop it from getting worse. One simple fix is to install shades or curtains to block incoming sunlight. If you don’t want to shut out the light, you can also tint your windows with a UV protectant. However, fading shouldn’t be much of an issue if you use high-quality interior house paint.
Summer is the busiest time of the year for painters, with some booked up to six months ahead of time, so book well in advance. Homebuyers getting VA loans have run into difficulties with this, so if you’re getting a VA renovation/rehabilitation loan, get all your painting and inspection estimates and work dates booked before you fill out any paperwork with a closing date, or the house will not be move-in ready in time.

Carefully consider the gloss level. The shiny gloss paints are easy to clean, but will make any wall blemish stand out. The flat paints will help disguise wall blemishes, but can be difficult to clean. Generally, you'll want glossier paints where there's lots of steam or cooking (baths and kitchens) and in high-traffic areas. Flatter paints are preferred for large walls and ceilings.
High-gloss paint is the most durable and easiest to clean of all paint sheens. It's ultra-shiny, light-reflective, and hard (think appliance-paint tough). High-glass paint has too much shine for interior walls; you'd find the reflections and drywall flaws distracting. It is a good choice for areas that sticky fingers touch, though, such as cabinets, trim, and doors.
If you are painting for a client, skip the paint in the bucket, and use large trays. For faster completion and still quality results the 5 gallon bucket and strainer work great as well as a wood filler, 5-in-1 tool, screw gun (drill), metal joint compound tray, metal putty knife, wide drywall knife, mini hand-held paint containers (for brushes), and a mini-roller and corresponding nap (for edging, after cutting in with brush on the bottom, top and sides of wall, and the sides of ceilings, so that you don't see brush lines).
If you have two weeks, a ladder and some experience, this makes an excellent DIY project. On most surfaces, it is forgiving of mistakes and easy to work with. Correcting mistakes only adds more time and not much more expense. However, a professional will get it done faster and with a better finish. If you don’t have 2 to 3 weeks to spare, find a professional painter near you today.
×