Many new homeowners want to change the color scheme of their rooms, either as a way to personalize the space or match the walls with existing furnishings and artwork. Interior house paint is relatively inexpensive, and it doesn’t require complicated machinery or professional-level skills to apply. There are also thousands of customizable colors available, as well as a choice of finishes, such as matte, semigloss, or gloss.


It's up to you. Outside is much harder because it requires more prep, patience, time, help, money and of course, effort. I have been painting my own houses and rental properties interiors for 20 years, and I painted the exterior of one, once. I then had it promptly done again by professionals who said it would have been cheaper if they didn't have to undo my work first. My advice is to get pros for the outside because everyone will see it.
Specialty painting, like murals and trompe l’oeil, costs $40 to $50 per hour. Paint might range between $75 to $90. The professional’s skill and experience are also determining factors. While a freelance artist might charge $25 to $30 an hour, a very skilled professional might charge $80 or more. Some might also charge $60 or more for a consultation.

From dull to shiny finishes, paint comes in several different lusters. A paint’s luster depends on its mixture of pigment, resin, and additional ingredients. If you’re struggling to decide what finish you want, note that glossier finishes tend to be more durable and washable. Flat paint, on the other hand, is better at hiding surface imperfections. Pearl and eggshell lusters fall somewhere in the middle, as they are more washable than flat paint and partially hide irregularities.
The Ceiling. For ceilings, flat is recommended, except semigloss or satin should be used in bathrooms with showers/tubs. Some customers opt to go with a different finish for ceilings in general, to create a specific design look, i.e. high gloss ceilings on dining room tray ceiling to make a statement, or eggshell ceilings throughout to look modern and make a statement. 
While many professionals use paint sprayers, they can leave drips and uneven coatings in the hands of an inexperienced user. If you’re set on DIY house painting but don’t have much practice, you may want to stick to rollers and brushes. Brushes are great for edges and smaller areas, while rollers can be used to paint large and long surfaces like siding and trim.
In addition to working on our house, Rome has now done jobs for my in-laws, brother, cousin and even a family friend (so its fair to say that I've seen a variety of his work in person) and all of us have been more than pleased with the finished products! If you're browsing for someone to "get the job done", end your search NOW and give Rome a call, you won't regret it!
If you are painting for a client, skip the paint in the bucket, and use large trays. For faster completion and still quality results the 5 gallon bucket and strainer work great as well as a wood filler, 5-in-1 tool, screw gun (drill), metal joint compound tray, metal putty knife, wide drywall knife, mini hand-held paint containers (for brushes), and a mini-roller and corresponding nap (for edging, after cutting in with brush on the bottom, top and sides of wall, and the sides of ceilings, so that you don't see brush lines).

However, some water-based paints are easier to work with than others. The first coat of paint may not provide complete wall coverage, or the color may not be quite as saturated. Some of these problems can be addressed with a separate primer coat, but this is a time-consuming project. The ideal solution is using a higher-quality paint that combines a primer and a finish paint in a “one coat” product.

I had Renato pain both interior and exterior (ongoing as I type). So far these projects have gone about as well as we could've hoped. Renato is great he is very good at staying on top of things and his crews are polite, work quickly and keep things cleaned up on a daily basis. I would highly recommend General Painting to anyone, including family and friends (which we've already done by the way). Thanks Renato.
While vinyl siding salespeople claim it never needs to be painted, it does lose its color strength over time, and the degree of fading can vary depending on which sides get the most exposure to sunlight. Perhaps it still hasn’t faded, but you don’t like the color much. You can’t go any darker than its current color, though, because the siding is designed to absorb only so much heat, and a darker color could cause it to buckle. Vinyl paint is available in many colors. Brush painting and roll painting vinyl siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.
After you have done the multiplication, subtract about 40 sq feet per window, and about 60 sq feet per door. Divide by 400 (interior paint covers 400 sq feet per gallon). The number that remains, is how many gallons you will need. If doing multiple wall colors, then you should do this process for each room (or sets of rooms) with a particular color. 
There are a few ways to prevent your interior house paint from fading — or stop it from getting worse. One simple fix is to install shades or curtains to block incoming sunlight. If you don’t want to shut out the light, you can also tint your windows with a UV protectant. However, fading shouldn’t be much of an issue if you use high-quality interior house paint.
I hired a painting company to paint my house and garage. Price was about $5,000.Sherwin Williams paint T-1000. When he was questioned about the paint peeling two days after he painted the garage he quit even with a contract not a very professional person. So,now I have to find someone else to paint my house.After 3 weeks of them trying to paint around the rain. The original time frame was 3-4 days.Yes 3 weeks and all that got done was a small two car garage that could have been done in two days.I know he did not prep correctly and properly I will end up having to redo the garage. I went to Sherwin Williams and got the colors.So beware even with a contract and good references.

For trim and doors, start with 1 gallon (3.8 L) of trim paint for every 600 sq feet of floor space. Purchase more at the store if/when needed. Trim is something that is difficult to calculate exactly, and it is more time-efficient to simply start with less than you need, and go buy more after you have used up the first round of paint and determined how much you will need to finish by seeing how much you have painted so far, compared to the gallons used.
If you are seeking a few gallons of interior house paint for your home, office, or apartment, read our helpful shopping guide. We have compared dozens of brands of interior house paints currently on the market and have compiled a short list of our favorites. Topping that list is Benjamin Moore Ultra Spec 500 Interior Paint, a low-odor, VOC-free formula from one of the most trusted brands in paint.
A more user-friendly option is a water-based “latex” paint, which blends acrylic pigments with a thin base for easy application with a brush or paint sprayer. Although many water-based interior paints are promoted as one-coat wonders, there can still be a need for an initial primer coat followed by one or two coats of latex paint. Water-based paints are very low in VOCs, which means minimal odors during the drying period. Most spills can be wiped away without the need for chemical cleaners, and clothing containing latex paint can be laundered in water and detergent. Water-based paint is a good choice for first-time DIYers and their younger assistants.
One of the most common home-improvement projects can also be one of the most enjoyable for the entire household. While some aspects of interior room painting, such as masking and “cutting in,” can require some experience and skill, applying a fresh coat of paint to a ceiling or wall or doorway is often a matter of a good brush, a paint tray, and some sweat equity. A coat of fresh paint may be all that’s required to revive a living space that’s faded a bit.

Prime. Dark colors, stains (once sealed), and previously unpainted surfaces (drywall, spackle, etc.) will need a primer coat, usually white. NOTE: most paint stores & home improvement centers will now tint primer (at no charge) to match fairly close to the color of the finished coat, that way two coats of primer need not be applied.[6] Although not all surfaces need a prime coat, skip this step at your peril! Dark colors will likely show through the first -- or even the first couple-- topcoats of paint. Sealants and unpainted surfaces like spackle patches will absorb or repel moisture in a topcoat at a different level than the areas surrounding them. Applying a good primer coat will help even out these differences. Primer equalizes a wall to a uniform surface. It's like erasing a canvas before drawing a new picture. Although some will argue the point, you generally don't need to spend a great deal on primer or buy special primer. A cheap, 5 gallon (18.9 L) bucket of plain, flat white paint will usually do the trick and cover a large area. Give your primer at least 24 hours to dry (follow its instructions) before applying a topcoat.
For trim and doors, start with 1 gallon (3.8 L) of trim paint for every 600 sq feet of floor space. Purchase more at the store if/when needed. Trim is something that is difficult to calculate exactly, and it is more time-efficient to simply start with less than you need, and go buy more after you have used up the first round of paint and determined how much you will need to finish by seeing how much you have painted so far, compared to the gallons used.
Compare offers. The painter offering the lowest rate may not always be the best painter for the job. Indeed, the total cost isn't the only factor to consider when choosing between multiple bids. You'll want to look at contracts side by side to ensure you're making an apples-to-apples comparison. Are the same materials being used? Are the same services included? Does the painter provide a warranty?
Before hiring a painter, you should get a detailed estimate from them. This should include costs for labor, materials, paint, and the timeframe of the project. Covering details upfront will prevent issues from emerging later on. Ask the painter if they charge for travel time, whether their estimate includes pressure washing and caulking, and any other questions you might have.
Plan the schedule. Get a grip on the time it will take to bring the project to fruition. Plan for time to move furniture, wall prep, cut in, the painting itself, eating and breaks, and don't forget cleanup and bringing furniture back in. As you plan, err on the side of prudence. Unforeseen events will slow you down, so allow time for these. Remember, this is a multi-day project. Don't try to fit too much into a day. If you move faster than planned, great!
Are you looking for the best painting company in Barrie with an outstanding and affordable house painter? Check on Mitchell of Change of Colour Painting. As a painting contractor, they do interior and exterior painting services for homes and businesses. They are primarily serving Barrie, Ontario, but can cater to residences and businesses in Orillia, Burks Falls, Horshoe Valley, Newmarket, Muskoka, Elmvale, Richmond Hill, and Ajax. Request a free quote by calling 705-279-2557 or email at [email protected]
The BEHR PREMIUM PLUS 2 gal. Flat Interior The BEHR PREMIUM PLUS 2 gal. Flat Interior Ceiling Paint is designed for use on textured popcorn and acoustic-style ceilings. This splatter-resistant paint offers great hiding performance for coverage of up to 800 sq. ft. Its mildew-resistant finish helps ensure that the matte sheen lasts over time.  More + Product Details Close
Most of a projects price is the cost of labor at $25 to $75 per hour. However, most contractors bid out based on the entire project which includes all work hours. Hourly rates are only useful if your pro asks to do the job as “time and materials.” However, be wary of this pricing structure, it usually shows the contractor is uncertain how long the project will take.
×