While you may choose to paint a door, ground-level window trim and other parts of your house’s exterior, it’s really a job best left to the professionals. One of the main reasons is experience. An experienced painter knows how to handle the prep work, spot problems and identify sources of future trouble, all while getting the job done more efficiently. They are also experienced with spending long hours on tall ladders. If you want high-quality work, it’s best to hire a professional painter near you.
Expect to pay between $600 to $3,500 or $1.25 to $3 per square foot to coat vinyl, with prices likely increasing for the finish. It is one of the more inexpensive siding materials to have repainted, especially with recent innovations in materials. Changing the finish on your siding is not recommended unless it's completely degraded and worn away by the weather. You can save nearly half the vinyl siding installation cost of $4 per square foot by painting rather than replacing. Before adding a new coat to vinyl siding,
Painting a brand new house with smooth surfaces dramatically reduces prep work. On the other hand, if you’re painting an old home with peeling walls or siding, it’s going to take a lot longer. When deciding whether to hire house painting professionals or do it yourself, take the current state of the paint into consideration. If you’re not up for the challenge of scraping and sanding for hours, you should hire help to get the best results.
Supplies and Equipment – Scraping, sanding, and stripping tools and supplies; patching compound; power washer rental; primer; caulk; masking supplies; painters’ tape; ladders and scaffolding; paint pans; brushes, sprayers, and roller brushes all cost money, even if you do it yourself. Consider all of those tools and equipment sitting in your garage for the rest of your life vs. paying an experienced painter to do it all for you at a price that saves you weeks of time. Expect to pay $5–$6 per 100 sq. ft. for supplies and materials.
Paint acts as a protectant on wooden siding, slowing down the rotting process. This makes it incredibly important to fully coat the undersides of corner boards on the exterior of your home. Whether you’re undertaking a DIY house painting endeavor or have hired professionals, you should check corner boards and shutters to make sure they’re fully painted.
The Cutters. Someone with meticulous attention to detail and a steady hand should be assigned the job of "cutting in," or painting a straight edge where needed, such as along a wall where the ceiling does not get painted. Many products are available to assist, but none work as well as a person who's good at doing it freehand. Ensure this person is skilled (ask them to show you). A poor, jagged, wavy or splotched cutting-in job will jump out at you every time you walk by it. Why more than one cutter? This job is nerve-wracking and painful to hands and arms after a few days. You'll want to give this person a break after a few walls.
The following guidelines will set you up for success. First, start at the top and work down. Second, paint out of the sun’s glare, since the sun will cause the paint to dry too quickly and flake or blister. To avoid marks, try to brush from one wet surface onto another. If you do have to paint onto a dry surface, overlap the wet paint onto the dry surface by several inches.
While many professionals use paint sprayers, they can leave drips and uneven coatings in the hands of an inexperienced user. If you’re set on DIY house painting but don’t have much practice, you may want to stick to rollers and brushes. Brushes are great for edges and smaller areas, while rollers can be used to paint large and long surfaces like siding and trim.
I hired a painting company to paint my house and garage. Price was about $5,000.Sherwin Williams paint T-1000. When he was questioned about the paint peeling two days after he painted the garage he quit even with a contract not a very professional person. So,now I have to find someone else to paint my house.After 3 weeks of them trying to paint around the rain. The original time frame was 3-4 days.Yes 3 weeks and all that got done was a small two car garage that could have been done in two days.I know he did not prep correctly and properly I will end up having to redo the garage. I went to Sherwin Williams and got the colors.So beware even with a contract and good references.
Dirt and grime are bound to develop on exterior house paint after some time. Luckily, you can easily clean your home with a pressure washer. It’s recommended that you pressure wash your home about five or six years after the initial paint job. For areas like porches and overhangs, you should clean them more often. Taking a garden hose to these areas once a year should do the trick.
Plan the schedule. Get a grip on the time it will take to bring the project to fruition. Plan for time to move furniture, wall prep, cut in, the painting itself, eating and breaks, and don't forget cleanup and bringing furniture back in. As you plan, err on the side of prudence. Unforeseen events will slow you down, so allow time for these. Remember, this is a multi-day project. Don't try to fit too much into a day. If you move faster than planned, great!
1300 square foot house + single car garage. House on hill, 1/2 of house is 2 story, 1/2 1 story. South side of house needs LOTS OF PREP WORK! Paint peeling & flaking off. Want eves & facia white--stucco bottom white--wood siding blue grey--window trim white--and small accents, window sash, and single garage door antique white. (Sherwin Williams paint design colors). 1 base coat, 2 finish coats. Cost in CA.
Wood is probably the most time-consuming when it comes to preparing it for paint. It has to be scraped and sanded until there isn’t a single chip or bit of loose paint in sight. Any wood siding or trim with wood rot will need to be replaced, and all cracks and holes need to be filled with epoxy filler. Brush painting and roll painting wood siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.
You can expect to pay between $700 to $3,000 to paint wood siding. You’ll end up spending $1 to $3 per square foot, but typically you’ll find this material is cheaper than brick or vinyl. Wood requires some type of sealant, be it paint, stain or oil. Lumber takes well to a wide variety of coverings giving you endless options for modern, contemporary or classic looks. Some things to consider when choosing wood: