Get estimates from several contractors, request and contact references, search for complaints at the Better Business Bureau[12] and check that the company is properly bonded and insured, as well as licensed in your state[13] . Only pay a small deposit, and don't pay the entire amount until the job is finished to your complete satisfaction (both painting and cleanup).

Basic labor to paint home with favorable site conditions. Prep up to 3 hr per 100 SF - clean, scrape, sand and patch up to 4 defects per 100 SF. Caulk gaps and spot prime. Roll / brush 2 coats of paint over lightly textured ceiling/walls. Paint up to 2 doors and door trim per room. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. 129 square feet $97.99 $132.56
One of the first considerations when it comes to interior house paint is the base. There are two schools of thought, each with their pros and cons. Some brands commonly sold to contractors for commercial projects are oil-based, meaning the chosen pigment is mixed with an oil derivative called alkyd. Oil-based paint provides thorough coverage, and the finished coat resists moisture well. However, oil-based paint releases a high level of volatile organic compounds (VOCs) as it dries, and it can only be removed from floors, brushes, and clothing with strong chemical paint thinners. In fact, many states have actually banned the use of oil-based paints because of their VOC levels and hazardous ingredients.
You might pay an additional $1 to $5 per square foot for optional repairs and updates. Consider having your molding, trim and baseboards checked while you have a professional in your home. This might be a good time to upgrade or repair any cracks, warps or other issues. Pros can usually touch up or replace these items for an affordable rate, and they may even package such fixups with your project.

An example of the wall measurement would be: 40 linear feet of bedroom space, x 8 wall height, =  320, x 2 = 640. Minus 1 door (60) and 2 windows (80) = 500 sq feet being painted. Then divide the 500 by 400 (sq feet per gallon), and you get 1.25 gallons (4.73 L) needed for that room. For this, you'd need 1 gallon (3.8 L) and 1 US-quart (950 ml). If the amount it comes out to is over 1.3, we recommend just getting 2 gallons (7.6 L) so that you have leftovers if needed, since 2 US quarts (2,000 ml) costs essentially the same as a gallon in most stores.
Some paints are two-in-one paint and primer products, or so-called "self-priming paints." These paints are designed to seal and cover surfaces in one coat. But, here's the secret: though it's called a paint-and-primer-in-one product, there's actually no primer in the mix—what you're really working with is just a thicker paint that often doesn't perform as well as using separate primer and paint.

House painting is no easy feat. While you may be tempted to purchase the cheapest kind of paint you can find, remember that you want the paint to look good and last a long time. If you haven’t chosen a color palette, there are a number of apartment design apps out there to spark inspiration. Once you’ve decided upon your color scheme, you’ll have to choose what kind of paint you want.

Some basic interior paints are sold in bulk, often in neutral colors such as white or beige. These can be very economical if the home’s color scheme is not a major consideration. However, many homeowners prefer to apply customized colors to match the furnishings or create a specific ambience for each room. Because of advancements in the industry, many manufacturers now offer a dizzying array of colors, from cool pastels to bold metallics.
High-gloss paint is the most durable and easiest to clean of all paint sheens. It's ultra-shiny, light-reflective, and hard (think appliance-paint tough). High-glass paint has too much shine for interior walls; you'd find the reflections and drywall flaws distracting. It is a good choice for areas that sticky fingers touch, though, such as cabinets, trim, and doors.
Priming - $30–$40/hour for labor. Many of the materials above need to be primed, but not all do. If you’re changing paint colors from dark to light or light to dark, use a color similar to the top coat. That way you’re less likely to need extra coats over the standard two. Prime with a flat or eggshell paint. You can ask your paint store to add tint to the primer to match it with the top coat color. Hammer in exposed nails and spray them with a metal primer to prevent rust.
I had Renato pain both interior and exterior (ongoing as I type). So far these projects have gone about as well as we could've hoped. Renato is great he is very good at staying on top of things and his crews are polite, work quickly and keep things cleaned up on a daily basis. I would highly recommend General Painting to anyone, including family and friends (which we've already done by the way). Thanks Renato.
Dirt and grime are bound to develop on exterior house paint after some time. Luckily, you can easily clean your home with a pressure washer. It’s recommended that you pressure wash your home about five or six years after the initial paint job. For areas like porches and overhangs, you should clean them more often. Taking a garden hose to these areas once a year should do the trick.

My husband and I hired Rome and his crew to paint the exterior of our home and we couldn't be happier with the finished product! We purchased a Contemporary style home that was built in 1985 and what was once a gloomy, sad shade of a blue/grey, in desperate need of a facelift. Now, this house really feels like a "new" home (complete with an updated deck...read on for more)!
Paint acts as a protectant on wooden siding, slowing down the rotting process. This makes it incredibly important to fully coat the undersides of corner boards on the exterior of your home. Whether you’re undertaking a DIY house painting endeavor or have hired professionals, you should check corner boards and shutters to make sure they’re fully painted.

Paper/poly drop cloths: $2 to $6 for 9x12-feet. The best of both paper and plastic, these cloths are low-cost and disposable. They absorb paint drips while providing more protection for what's underneath. They also provide some protection from slipping. Plus, you can cut paper/poly drop cloths to fit the space. But, like paper, paper/poly drop cloths can rip more easily than plastic or canvas drop cloths.


While some professional painters will charge a flat fee for a painting project, most charge an hourly rate—about $25 to $100 per hour on average. Most painters will charge more for last-minute jobs (think 48 hours' notice or less), travel costs (if you live far away, the painter may want extra money for gas), or intensive prep work (e.g., removing mold or stains before painting). Also, depending on the painter, the rate may or may not include the cost of paint materials such as paint, primer, and supplies.

The following guidelines will set you up for success. First, start at the top and work down. Second, paint out of the sun’s glare, since the sun will cause the paint to dry too quickly and flake or blister. To avoid marks, try to brush from one wet surface onto another. If you do have to paint onto a dry surface, overlap the wet paint onto the dry surface by several inches.
It is helpful then to outline your wall with 2 or 3 inches of primer around the edges and frames before priming entirely the wall. Such a technique should help create a professional look by eliminating drips and splatters. A handheld brush is the best choice for this. For the actual primer application, roller paint can provide extra convenience. Spread the primer pain in V or W-shaped strokes. Once the primer has dried, sand down the bumps and wipe the walls down with a damp sponge.
Although interior house paints can be purchased in pint-size samples or five-gallon buckets, the standard measurement is by the gallon can. A gallon can of basic water-based paint can be found on store shelves for less than $25, but the additional cost of a primer coat should be considered. One-coat paint/primer blends for most DIY projects should cost between $30 and $60 a gallon, including customized tinting. VOC levels should be lower as well. For high-end painting projects featuring designer colors or full-gloss finishes, expect to pay $60 or more per gallon.
One of the most common home-improvement projects can also be one of the most enjoyable for the entire household. While some aspects of interior room painting, such as masking and “cutting in,” can require some experience and skill, applying a fresh coat of paint to a ceiling or wall or doorway is often a matter of a good brush, a paint tray, and some sweat equity. A coat of fresh paint may be all that’s required to revive a living space that’s faded a bit.
BEHR Premium Cabinet and Trim Interior Semi-Gloss Enamel BEHR Premium Cabinet and Trim Interior Semi-Gloss Enamel offers excellent flow and leveling and dries to a hard, durable finish. Its outstanding block resistance allows for quick return to service, making it ideal for use on cabinets, trim, doors, windows, shutters and woodwork. This product can also be used on other properly prepared and primed substrates, such as drywall, masonry and metal.  More + Product Details Close
It's up to you. Outside is much harder because it requires more prep, patience, time, help, money and of course, effort. I have been painting my own houses and rental properties interiors for 20 years, and I painted the exterior of one, once. I then had it promptly done again by professionals who said it would have been cheaper if they didn't have to undo my work first. My advice is to get pros for the outside because everyone will see it.
Paper drop cloths: $3 to $5 for 9x12-feet. Paper drop cloths provide a cheap way to cover furniture or windows while painting small, indoor jobs, such as touching up window trim. They're absorbent and textured to hold paint. When you're finished, you can just fold them up and throw them away. However, paper cloths are not the best option for protecting floors since they can tear easily.
Expect to pay between $600 to $3,500 or $1.25 to $3 per square foot to coat vinyl, with prices likely increasing for the finish. It is one of the more inexpensive siding materials to have repainted, especially with recent innovations in materials. Changing the finish on your siding is not recommended unless it's completely degraded and worn away by the weather. You can save nearly half the vinyl siding installation cost of $4 per square foot by painting rather than replacing. Before adding a new coat to vinyl siding,
×