Paper/poly drop cloths: $2 to $6 for 9x12-feet. The best of both paper and plastic, these cloths are low-cost and disposable. They absorb paint drips while providing more protection for what's underneath. They also provide some protection from slipping. Plus, you can cut paper/poly drop cloths to fit the space. But, like paper, paper/poly drop cloths can rip more easily than plastic or canvas drop cloths.
Painting is one of the quickest and easiest ways to give your home's interior a facelift with dramatic results. Fortunately, it doesn't have to be that difficult. Home improvement stores offer samples that you can take home. With these samples, you can try a few colors in large swaths on your wall to see the how the paint interacts with the room's natural light. Compare it against design elements like pillows or furniture to see whether it will work with your overall décor.
Needless to say, an exterior paint job tends to be more complicated. Indoors, you don’t have to deal with the elements. When painting the exterior of a home, however, you have to think about tough to reach places and the unpredictability of the weather. If you just want to repaint your front door, we trust that you’ll be able to do it yourself. Contrarily, a full exterior makeover requires professional help.
You’ll spend between $500 and $3,000 or $1 to $3.50 per square foot to paint concrete. However, expect to pay $2 to $7 per square foot since concrete almost always needs a coat of primer first. Double that price if the concrete requires stripping. Concrete is porous. Sealing it not only helps blend foundations and walls with your home’s aesthetic, but also seals it against water. Repairing or resurfacing concrete costs $300 to $500 for every 100 square feet.
Two aesthetic things to consider when selecting a finish are how shiny you'd like the surface to be and whether or not you want to hide any imperfections on the surface to be painted. Generally, higher-gloss paint finishes reflect light better than lower-gloss finishes, like eggshell and matte. That makes them shiny, and also causes them to highlight flaws in walls and ceilings.
If you have kids, pets, or occupants who will damage the walls, it is recommended to go with washable matte, eggshell, or satin, because these paints can be easily cleaned and are more durable. However, flat paint can be touched up more easily and hides imperfections better, so if you are selling the home, it is highly recommended to go with flat. Bathrooms with showers/tubs should go in semigloss- unless you are selling or want a specific design look, then use satin.
A moisture meter will let your contractor know if there’s moisture in the stucco before starting. The wetter the material, the less ready it is to be sanded, painted, finished or covered. Your contractor will use a premixed stucco repair patch material to fill any small holes and will paint on dry days to avoid sealing in water. Painting rough stucco requires more paint. Brush painting stucco costs $112 per 100 sq. ft., roll painting costs $55 per 100 sq. ft., and spray painting stucco costs $25 per 100 sq. ft.
There are a few ways to prevent your interior house paint from fading — or stop it from getting worse. One simple fix is to install shades or curtains to block incoming sunlight. If you don’t want to shut out the light, you can also tint your windows with a UV protectant. However, fading shouldn’t be much of an issue if you use high-quality interior house paint.
Some paints are two-in-one paint and primer products, or so-called "self-priming paints." These paints are designed to seal and cover surfaces in one coat. But, here's the secret: though it's called a paint-and-primer-in-one product, there's actually no primer in the mix—what you're really working with is just a thicker paint that often doesn't perform as well as using separate primer and paint.
An example of the wall measurement would be: 40 linear feet of bedroom space, x 8 wall height, = 320, x 2 = 640. Minus 1 door (60) and 2 windows (80) = 500 sq feet being painted. Then divide the 500 by 400 (sq feet per gallon), and you get 1.25 gallons (4.73 L) needed for that room. For this, you'd need 1 gallon (3.8 L) and 1 US-quart (950 ml). If the amount it comes out to is over 1.3, we recommend just getting 2 gallons (7.6 L) so that you have leftovers if needed, since 2 US quarts (2,000 ml) costs essentially the same as a gallon in most stores.
The Ceiling. For ceilings, flat is recommended, except semigloss or satin should be used in bathrooms with showers/tubs. Some customers opt to go with a different finish for ceilings in general, to create a specific design look, i.e. high gloss ceilings on dining room tray ceiling to make a statement, or eggshell ceilings throughout to look modern and make a statement.
If the exterior of your home is unpainted or has been scraped and sanded, you will want to lay down a coat of primer. Make sure that the primer you’re using is right for the surface you’re painting. While most surfaces can be treated with acrylic primer, some surfaces, like cedar and redwood, require oil-based primers. The oil stops the wood tannins from bleeding through the topcoat.
If you have two weeks, a ladder and some experience, this makes an excellent DIY project. On most surfaces, it is forgiving of mistakes and easy to work with. Correcting mistakes only adds more time and not much more expense. However, a professional will get it done faster and with a better finish. If you don’t have 2 to 3 weeks to spare, find a professional painter near you today.