Test different paint swatches. The last thing you want to do is paint a whole room and then decide you despise the color (yes, it happens!). Try out different paint colors on the surface before choosing the paint that you want. Buying sample sizes will help you save money. The caveat: paint color samples are not real paint, so if you try to finish or touch up a project with samples, the paint will fade.
After you have done the multiplication, subtract about 40 sq feet per window, and about 60 sq feet per door. Divide by 400 (interior paint covers 400 sq feet per gallon). The number that remains, is how many gallons you will need. If doing multiple wall colors, then you should do this process for each room (or sets of rooms) with a particular color. 
Needless to say, an exterior paint job tends to be more complicated. Indoors, you don’t have to deal with the elements. When painting the exterior of a home, however, you have to think about tough to reach places and the unpredictability of the weather. If you just want to repaint your front door, we trust that you’ll be able to do it yourself. Contrarily, a full exterior makeover requires professional help.
Are you looking for the best painting company in Barrie with an outstanding and affordable house painter? Check on Mitchell of Change of Colour Painting. As a painting contractor, they do interior and exterior painting services for homes and businesses. They are primarily serving Barrie, Ontario, but can cater to residences and businesses in Orillia, Burks Falls, Horshoe Valley, Newmarket, Muskoka, Elmvale, Richmond Hill, and Ajax. Request a free quote by calling 705-279-2557 or email at [email protected]
Painting a brand new house with smooth surfaces dramatically reduces prep work. On the other hand, if you’re painting an old home with peeling walls or siding, it’s going to take a lot longer. When deciding whether to hire house painting professionals or do it yourself, take the current state of the paint into consideration. If you’re not up for the challenge of scraping and sanding for hours, you should hire help to get the best results.
Priming - $30–$40/hour for labor. Many of the materials above need to be primed, but not all do. If you’re changing paint colors from dark to light or light to dark, use a color similar to the top coat. That way you’re less likely to need extra coats over the standard two. Prime with a flat or eggshell paint. You can ask your paint store to add tint to the primer to match it with the top coat color. Hammer in exposed nails and spray them with a metal primer to prevent rust.
Compare offers. The painter offering the lowest rate may not always be the best painter for the job. Indeed, the total cost isn't the only factor to consider when choosing between multiple bids. You'll want to look at contracts side by side to ensure you're making an apples-to-apples comparison. Are the same materials being used? Are the same services included? Does the painter provide a warranty?
Get quotes from at least three painters. To answer the ultimate question, how much does it cost to paint a house, you'll want to obtain several bids before deciding who gets your business. Have the painters come to view your property in person before they write you a formal bid. This way there will be no surprises when the painters show up to perform the work.
Give your fireplace mantle an accent paint color, as this adds a quick update without having to tear anything out. In the kitchen, give your cabinets a new look with a douse of kitchen cabinet paint for an affordable and satisfying update. Countertop paint makes kitchen countertops look new again. You can do it yourself with a countertop paint kit in less than a weekend. A worn-out bathtub can look new with a coating of bathtub paint. Even your tiles can get a refresh or touch up, try tile paint on your backsplash or shower. Pro-tip: Use semi-gloss paint for kitchens and bathrooms as they wipe down easily.
Some siding on older homes might need so much repair that it is more cost-effective to replace the siding rather than repair it all and then paint over it. Expect to pay between $1,550 and $3,050 for the removal and disposal of old siding and $4,000 to $14,000 for new siding and installation. Expect to pay more if the wood underneath is wet and rotten and needs structural repair work.
Of course, paint brushes and rollers are also important line items on your budget sheet. A 3-inch-wide paint brush costs, on average, $10 to $20—though you'll likely need an assortment of paint brush sizes for trim, corners, and narrow surface areas. Brushes come in a variety of bristle types and qualities, and each has a different purpose. Some are intended for specific paint types, finishes, and surfaces, so be sure to buy the right brushes for your painting job.
Basic labor to paint home with favorable site conditions. Prep up to 3 hr per 100 SF - clean, scrape, sand and patch up to 4 defects per 100 SF. Caulk gaps and spot prime. Roll / brush 2 coats of paint over lightly textured ceiling/walls. Paint up to 2 doors and door trim per room. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. 129 square feet $97.99 $132.56
Wood is probably the most time-consuming when it comes to preparing it for paint. It has to be scraped and sanded until there isn’t a single chip or bit of loose paint in sight. Any wood siding or trim with wood rot will need to be replaced, and all cracks and holes need to be filled with epoxy filler. Brush painting and roll painting wood siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.
Needless to say, an exterior paint job tends to be more complicated. Indoors, you don’t have to deal with the elements. When painting the exterior of a home, however, you have to think about tough to reach places and the unpredictability of the weather. If you just want to repaint your front door, we trust that you’ll be able to do it yourself. Contrarily, a full exterior makeover requires professional help.
The BEHR PREMIUM PLUS 5 gal. Flat The BEHR PREMIUM PLUS 5 gal. Flat Interior Ceiling Paint features a durable, splatter-resistant acrylic-latex formulation. It is designed for application on previously-painted or primed texture, popcorn and acoustic-style ceilings. The paint offers excellent coverage and resists mildew growth to help ensure that the finish remains attractive over time.  More + Product Details Close
Scale has one of the biggest impacts on deciding whether to hire painting help or take matters into your own hands. If you want to paint your home, consider whether or not this is a realistic task to take on yourself. For instance, is your house multiple stories or a townhouse? Do you just want to paint the kitchen or the entire exterior? Once you factor in the time it takes to do the prep work and lay down multiple coats of paint, a DIY paint job can get complicated. If the house painting job is extensive, you may want to leave it to professionals.
While many professionals use paint sprayers, they can leave drips and uneven coatings in the hands of an inexperienced user. If you’re set on DIY house painting but don’t have much practice, you may want to stick to rollers and brushes. Brushes are great for edges and smaller areas, while rollers can be used to paint large and long surfaces like siding and trim.
Most house painting professionals will agree that two coats of paint are needed on a home. Using one coat of paint may look sufficient, but will not hold up over time. Two coats of paint, on the other hand, provide protection, washability, and help retain the true color of the paint. If you are still toying with the idea of hiring a professional painter, ask if two coats of paint are included in the pricing estimate.
Another type of paint is on the market that claims to be a primer and paint in one. Basically, it’s just thicker paint and costs twice as much as regular paint. Most professional painters aren’t fans, but if you have exterior walls in excellent condition already, and the self-priming paint is the same color as the original paint color, it could certainly save painting time with one coat going on instead of two.

Use a roller to paint the rest of the wall. A good method to use is the 'W method'. You start by painting a large 3 foot (0.91 m) square W on the wall. Then, without lifting the roller, you fill in the W.[7] You can paint a wall section-by-section, and do the walls one at a time for best results. It's generally a good idea to use an extension pole for your roller instead of standing on a ladder. Make sure that neither the extension pole nor the roller has plastic handles, as plastic handles are flexible and this makes it difficult to control the painting.

Rome came to our house to take a look around back in May and promised me a quote by the end of the day-unlike other workers that we've had in the past, Rome stuck by his word and had it to me via email by dinnertime....something that reinforced the initial positive feeling that I had about him as he surveyed our home and listened to my ideas. We hired Rome and he and his crew began working on our home within the following couple weeks. Something we love about Rome is how knowledgable he is when it comes to the range of paint products and colors (we had a general idea that we wanted a light neutral color with a little tint of green and the easiest way for me was to have Rome narrow it down to 2-3 colors), for whatever advice or guidance we needed, he was always (and is always) a phone call away!
×