Decorating a house is a fun but important activity. It is important to make sure the curtains match the walls and the walls match the furniture. Earlier, all interior walls were painted in the same color, and in the same way. Today however, we get to have more fun with colors and textures. It's possible to create a fun effect on your walls using a sponge or even crushed tissue. You may want to paint one wall a different color from the rest of the room. You get to decide what colors you want to use, and how you want them to look on your wall. If you really want to decorate your entire home by yourself, you can even try painting your house by yourself with these 5 easy steps.
Plan the schedule. Get a grip on the time it will take to bring the project to fruition. Plan for time to move furniture, wall prep, cut in, the painting itself, eating and breaks, and don't forget cleanup and bringing furniture back in. As you plan, err on the side of prudence. Unforeseen events will slow you down, so allow time for these. Remember, this is a multi-day project. Don't try to fit too much into a day. If you move faster than planned, great!
The Cutters. Someone with meticulous attention to detail and a steady hand should be assigned the job of "cutting in," or painting a straight edge where needed, such as along a wall where the ceiling does not get painted. Many products are available to assist, but none work as well as a person who's good at doing it freehand. Ensure this person is skilled (ask them to show you). A poor, jagged, wavy or splotched cutting-in job will jump out at you every time you walk by it. Why more than one cutter? This job is nerve-wracking and painful to hands and arms after a few days. You'll want to give this person a break after a few walls.
Your contractor will sweep or scrub the concrete first with a dry brush, and then clean it thoroughly with trisodium phosphate (TSP) and warm water, then let it dry. TSP is a mostly alkaline solution that does a great job cleaning grease and oil off concrete surfaces. Brush painting concrete siding costs $138 per 100 sq. ft., roll painting costs $50 per 100 sq. ft., and spray painting $32 per 100 sq. ft.
Paint acts as a protectant on wooden siding, slowing down the rotting process. This makes it incredibly important to fully coat the undersides of corner boards on the exterior of your home. Whether you’re undertaking a DIY house painting endeavor or have hired professionals, you should check corner boards and shutters to make sure they’re fully painted.
I had Renato pain both interior and exterior (ongoing as I type). So far these projects have gone about as well as we could've hoped. Renato is great he is very good at staying on top of things and his crews are polite, work quickly and keep things cleaned up on a daily basis. I would highly recommend General Painting to anyone, including family and friends (which we've already done by the way). Thanks Renato.
Painting interior walls does not require professional aptitude, but it is still a skill that arrives with a learning curve. The most challenging part of any interior painting project is the prep work, which often involves cleaning the walls, masking off windows, doorways and baseboards, then carefully “cutting in” the paint around the edges. Once the masking and cutting in are finished, volunteers with handheld or roller brushes can usually fill in the rest of the space with little trouble.
Oil-based paint is commonly used for high-moisture areas, such as bathrooms and kitchens, and floors, trims, and moldings, since these areas take more abuse over time than walls do. Typically oil-based paints are less expensive than latex paints, take longer to dry, can create bad odor while drying, and contain more volatile organic compounds (VOCs), which essentially means they're less environmentally friendly.
It’ll cost anywhere from $200 to $6,000 to hire a painter. Expect small jobs, like kitchen cabinets or trim, to run $200 to $2,000. Larger projects, like your home’s exterior, range from $1,000 to $6,000. To estimate your needs, figure paying $2 to $6 per square foot or $20 to $50 per hour. Actual costs vary considerably depending on coverage area, type of work and regional cost of living differences.