There are a number of measures you can take to prevent mold on the exterior of your home. Anti-mold paint works to stop mold from spreading. Still, anti-mold paint does deteriorate when exposed to prolonged sunlight and moisture. To prevent mold damage from spreading, it’s best to act fast. In order to ensure that all the mold is eradicated, we recommend calling a professional mold removal company.

Wood is probably the most time-consuming when it comes to preparing it for paint. It has to be scraped and sanded until there isn’t a single chip or bit of loose paint in sight. Any wood siding or trim with wood rot will need to be replaced, and all cracks and holes need to be filled with epoxy filler. Brush painting and roll painting wood siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.
Painters will agree that you should always aim to paint in the part of the year when it’s least likely to rain, has low humidity, and when the temperatures are above 50 F. Rain can wash wet latex paint off a wall, and temps that are too low can affect the way the paint sticks to the walls. Some painters will add additives to the paint if working in very high temperatures to slow down the drying time.
Carefully consider the gloss level. The shiny gloss paints are easy to clean, but will make any wall blemish stand out. The flat paints will help disguise wall blemishes, but can be difficult to clean. Generally, you'll want glossier paints where there's lots of steam or cooking (baths and kitchens) and in high-traffic areas. Flatter paints are preferred for large walls and ceilings.

House painting is no easy feat. While you may be tempted to purchase the cheapest kind of paint you can find, remember that you want the paint to look good and last a long time. If you haven’t chosen a color palette, there are a number of apartment design apps out there to spark inspiration. Once you’ve decided upon your color scheme, you’ll have to choose what kind of paint you want.
Paper/poly drop cloths: $2 to $6 for 9x12-feet. The best of both paper and plastic, these cloths are low-cost and disposable. They absorb paint drips while providing more protection for what's underneath. They also provide some protection from slipping. Plus, you can cut paper/poly drop cloths to fit the space. But, like paper, paper/poly drop cloths can rip more easily than plastic or canvas drop cloths.
For walls, measure the linear feet of wall space (measuring along the baseboards) for the areas to be painted (using a tape measure, laser, or both). Then multiply this by the ceiling height (usually it is 7.5 or 8). If there are 2 story areas, measure them separately, and multiply them by double the regular wall height. Then multiply the total number by 2 (for 2 coats).
While vinyl siding salespeople claim it never needs to be painted, it does lose its color strength over time, and the degree of fading can vary depending on which sides get the most exposure to sunlight. Perhaps it still hasn’t faded, but you don’t like the color much. You can’t go any darker than its current color, though, because the siding is designed to absorb only so much heat, and a darker color could cause it to buckle. Vinyl paint is available in many colors. Brush painting and roll painting vinyl siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft.
Following the same process as the primer, cut in the walls with your chosen paint. For best results, paint one wall at a time. This makes it easier to spread the paint while it’s still wet. Work from top to bottom, rolling the paint in V or W-shaped strokes. Before applying a second coat, wait two to four hours. Then proceed with the same process used for the first coat.
The Cutters. Someone with meticulous attention to detail and a steady hand should be assigned the job of "cutting in," or painting a straight edge where needed, such as along a wall where the ceiling does not get painted. Many products are available to assist, but none work as well as a person who's good at doing it freehand. Ensure this person is skilled (ask them to show you). A poor, jagged, wavy or splotched cutting-in job will jump out at you every time you walk by it. Why more than one cutter? This job is nerve-wracking and painful to hands and arms after a few days. You'll want to give this person a break after a few walls.
At least 90% of painting time goes into setup, prep work, and priming. The method of prepping required varies for each type of exterior material on the home, but every project must be patched and cleaned. The more thoroughly you prep and prime your home’s exterior, the longer your paint job will last. You could save quite a bit if you do this part yourself, but it must be done correctly, or your contractor will have to go over what you missed. The prices mentioned are based on paying a contractor to do each job rather than one overall quote for the work from start to finish.
Begin prepping your walls by removing any outlet covers or lighting fixtures (if possible). Next, inspect your walls for any defects. If you encounter cracks, dents, or holes in your walls, simply fill them in with caulk or spackling compound. There are also a number of DIY tips to fill nail holes. Once your repairs dry, smooth them down with sandpaper and wipe the walls down with a damp sponge.
BEHR Premium Cabinet and Trim Interior Semi-Gloss Enamel BEHR Premium Cabinet and Trim Interior Semi-Gloss Enamel offers excellent flow and leveling and dries to a hard, durable finish. Its outstanding block resistance allows for quick return to service, making it ideal for use on cabinets, trim, doors, windows, shutters and woodwork. This product can also be used on other properly prepared and primed substrates, such as drywall, masonry and metal.  More + Product Details Close
When painting a carpeted room, keep in mind that paint will soak through drop cloths. This is especially true of the cheaper, lightweight cloths. It helps to tape masking paper to all of the base boards before laying the drop cloths. Tuck the edges of the cloth under the paper--this will help keep it clean. You might want to invest in a hand-held masking machine--they make the job go much faster. Even after taking these precautions make sure to clean big drops or spills before they soak through and before you step on them!
Needless to say, an exterior paint job tends to be more complicated. Indoors, you don’t have to deal with the elements. When painting the exterior of a home, however, you have to think about tough to reach places and the unpredictability of the weather. If you just want to repaint your front door, we trust that you’ll be able to do it yourself. Contrarily, a full exterior makeover requires professional help.
The average cost to paint the interior of a house or room is $1 to $3 per square foot. Painters charge $1,200 to $3,900 to paint the walls in a house interior, and the cost to paint a room is $350 to $850. Prices increase when including the ceilings, baseboards, and trim. Get free estimates from interior painters near you or view our cost guide below.

Priming - $30–$40/hour for labor. Many of the materials above need to be primed, but not all do. If you’re changing paint colors from dark to light or light to dark, use a color similar to the top coat. That way you’re less likely to need extra coats over the standard two. Prime with a flat or eggshell paint. You can ask your paint store to add tint to the primer to match it with the top coat color. Hammer in exposed nails and spray them with a metal primer to prevent rust.
My husband and I hired Rome and his crew to paint the exterior of our home and we couldn't be happier with the finished product! We purchased a Contemporary style home that was built in 1985 and what was once a gloomy, sad shade of a blue/grey, in desperate need of a facelift. Now, this house really feels like a "new" home (complete with an updated deck...read on for more)!
×