Do the cleanup. When the painting is done, send the painter home and do the cleanup work yourself. This will include rolling up drop cloths and collecting scrapings, removing painter's tape (use a hair dryer on low heat to soften the adhesive), cleaning paint brushes, rollers, and other tools, replacing electric switch plates, outlet covers, and light fixtures, and sealing any leftover paint cans and storing them in a dry, temperature-controlled location.
Painters will agree that you should always aim to paint in the part of the year when it’s least likely to rain, has low humidity, and when the temperatures are above 50 F. Rain can wash wet latex paint off a wall, and temps that are too low can affect the way the paint sticks to the walls. Some painters will add additives to the paint if working in very high temperatures to slow down the drying time.
06/14/17: Renato completed an exterior painting project for our relatively large single family home in Stamford, CT last weekend. Project did not begin well especially with the prep, repair/carpentry work, but then Renato took full control and ensured that the work done was to our satisfaction. The final result is outstanding. Minor damage to window screens, gutters and plants. Ensure that your window screens, gutters, and shutters are numbered and stored indoors or if kept outdoor covered properly against the elements. The project can be extensively delayed due to rain and you may find yourself dealing with insects and/or flooding in basement and dirty/bent/ mismatched screens/gutters/shutters. Overall we had a good team working on our project and we are satisfied with the finished product. The house looks great!

Similar to exterior mold, mold is more likely to emerge in warm and humid areas. That being said, rooms like bathrooms and basements are more prone to mold. To preemptively prevent mold, use paints that are mold resistant. Should you find mold on a wall in your home, you can clean it with a simple solution of one part bleach to four parts water. If the area is large, you may want to leave the cleaning to a professional.

Paint supplies cost anywhere from $10 to $100 or more depending on what you need. Painters will typically provide most of the supplies for a project, but sometimes they will allow you to pay for solely labor if you provide all the materials yourself. You might decide to do a DIY paint job down the road. In which case having these supplies on-hand will save you time and money.
Many new homeowners want to change the color scheme of their rooms, either as a way to personalize the space or match the walls with existing furnishings and artwork. Interior house paint is relatively inexpensive, and it doesn’t require complicated machinery or professional-level skills to apply. There are also thousands of customizable colors available, as well as a choice of finishes, such as matte, semigloss, or gloss.
If you are painting for a client, skip the paint in the bucket, and use large trays. For faster completion and still quality results the 5 gallon bucket and strainer work great as well as a wood filler, 5-in-1 tool, screw gun (drill), metal joint compound tray, metal putty knife, wide drywall knife, mini hand-held paint containers (for brushes), and a mini-roller and corresponding nap (for edging, after cutting in with brush on the bottom, top and sides of wall, and the sides of ceilings, so that you don't see brush lines).
You might pay an additional $1 to $5 per square foot for optional repairs and updates. Consider having your molding, trim and baseboards checked while you have a professional in your home. This might be a good time to upgrade or repair any cracks, warps or other issues. Pros can usually touch up or replace these items for an affordable rate, and they may even package such fixups with your project.
Carefully consider the gloss level. The shiny gloss paints are easy to clean, but will make any wall blemish stand out. The flat paints will help disguise wall blemishes, but can be difficult to clean. Generally, you'll want glossier paints where there's lots of steam or cooking (baths and kitchens) and in high-traffic areas. Flatter paints are preferred for large walls and ceilings.
It is helpful then to outline your wall with 2 or 3 inches of primer around the edges and frames before priming entirely the wall. Such a technique should help create a professional look by eliminating drips and splatters. A handheld brush is the best choice for this. For the actual primer application, roller paint can provide extra convenience. Spread the primer pain in V or W-shaped strokes. Once the primer has dried, sand down the bumps and wipe the walls down with a damp sponge.
Use semi gloss for hallways because walls there are more likely to be touched, bumped or otherwise marked over time (semi gloss cleans more easily). However, use flat for a living room. Flat will help hide imperfections in the walls. If you want the same color in both the hall and living room, then no problem. Use flat in the living room, semi gloss in the hall, making the threshold the transition point.
Give your fireplace mantle an accent paint color, as this adds a quick update without having to tear anything out. In the kitchen, give your cabinets a new look with a douse of kitchen cabinet paint for an affordable and satisfying update. Countertop paint makes kitchen countertops look new again. You can do it yourself with a countertop paint kit in less than a weekend. A worn-out bathtub can look new with a coating of bathtub paint. Even your tiles can get a refresh or touch up, try tile paint on your backsplash or shower. Pro-tip: Use semi-gloss paint for kitchens and bathrooms as they wipe down easily.
Priming - $30–$40/hour for labor. Many of the materials above need to be primed, but not all do. If you’re changing paint colors from dark to light or light to dark, use a color similar to the top coat. That way you’re less likely to need extra coats over the standard two. Prime with a flat or eggshell paint. You can ask your paint store to add tint to the primer to match it with the top coat color. Hammer in exposed nails and spray them with a metal primer to prevent rust.
It is helpful then to outline your wall with 2 or 3 inches of primer around the edges and frames before priming entirely the wall. Such a technique should help create a professional look by eliminating drips and splatters. A handheld brush is the best choice for this. For the actual primer application, roller paint can provide extra convenience. Spread the primer pain in V or W-shaped strokes. Once the primer has dried, sand down the bumps and wipe the walls down with a damp sponge.

Most of a projects price is the cost of labor at $25 to $75 per hour. However, most contractors bid out based on the entire project which includes all work hours. Hourly rates are only useful if your pro asks to do the job as “time and materials.” However, be wary of this pricing structure, it usually shows the contractor is uncertain how long the project will take.
×